journal article·2010-08-17

CURRENT STATUS AND FUTURE DIRECTION IN THE NUMERICAL MODELING AND SIMULATION OF MACHINING PROCESSES: A CRITICAL LITERATURE REVIEW

Bin Shi, Helmi Attia

Machining Science and Technology· Volume 14· Issue 2
Publisher page

Abstract

This paper presents a literature review on modeling and simulation of the metal cutting process, with special consideration to difficult-to-cut materials. The critical issues in the modeling of the cutting process are presented and investigated, which include the identification and formulation of the material constitutive equation, as well as the models that describe the tribological and thermal interactions at the tool-chip interface. The available approaches for generating constitutive data are critically examined, and their advantages, capabilities and limitations are discussed. The formulation of the constitutive equation significantly affects the accuracy of the finite element (FE) simulation. The evaluation criteria proposed recently by the authors to assess the goodness of different constitutive relationships for the machining process are presented. It is shown that more accurate simulation can be obtained when using a pressure-dependent friction model, compared to that with uniform coefficients. Similar conclusion can be drawn in relation to expressing the thermal contact resistance (or conductance) as position dependent, being directly correlated to the local contact pressure at the interface. In addition, the current applications and future directions of the finite element modeling (FEM) of the metal cutting process are summarized.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Tunneling and Rock Mechanics · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Adibi-Sedeh , A.H. ; Vaziri , V. ; Pednekar , V. ; Madhavan , V. ( 2008 ) Investigation of the effect of using different material models on finite element simulations of machining .8th CIRP International Workshop on Modeling of Machining Operations, Chemnitz , Germany , pp. 215 – 224 .
2. Altan , T. ; Al-Zkeri , I. ; Sartkulvanich , P. ( 2007 ) Process modeling of high speed cutting using 2D-FEM . Proceedings of the NIST-Machining Conference , Washington , DC , US .
3. 10.1016/j.jmatprotec.2007.11.27110.1016/j.jmatprotec.2007.11.271 ↗
4. 10.1016/j.ijmachtools.2005.11.00510.1016/j.ijmachtools.2005.11.005 ↗
5. Anurag , S. ; Guo , Y.B. ; Liu , Z.Q. ( 2009 ) A new finite element approach without chip formation to predict residual stress profile patterns in metal cutting . Proceedings of the ASME 2009 International Manufacturing Science and Engineering Conference , MSEC2009 , Indiana , USA .10.1115/MSEC2009-84236 ↗
6. Arrazola P.J. · Materials Processing and Design: Modeling, Simulation and Applications · 2004 · 2004 · 1408
7. Astashev V. · Journal of Machinery Manufacture and Reliability · 1992 · 3 · 65
8. 10.1016/S0041-624X(97)00101-710.1016/S0041-624X(97)00101-7 ↗
9. 10.1016/j.cirp.2008.03.12310.1016/j.cirp.2008.03.123 ↗
10. Attia H. · 2004
11. Attia , M.H. ; Camacho , F. ( 1993 ) Temperature field in the vicinity of a contact asperity during fretting . ASME Symposium on Contact Problems and Surface Interactions in Manufacturing and Tribological Systems , PED-Vol.67/TRIB-Vol.4 .
12. 10.1016/S0007-8506(07)60642-810.1016/S0007-8506(07)60642-8 ↗
13. Aurich , J.C. ; Sudermann , H. ; Bil , H. ( 2006 ) 3D Finite Element Modeling of Burr Formation in Grinding . Proceedings of the 9th CIRP International Workshop on Modeling of Machining Operations , Bled , Slovenia , 47 – 50 .10.1016/S0007-8506(07)60363-1 ↗
14. 10.1016/j.cirp.2009.09.00410.1016/j.cirp.2009.09.004 ↗
15. 10.1016/S0957-4158(03)00014-X10.1016/S0957-4158(03)00014-X ↗
16. 10.1016/j.ultras.2004.02.00110.1016/j.ultras.2004.02.001 ↗
17. 10.1016/S0924-0136(02)00844-010.1016/S0924-0136(02)00844-0 ↗
18. 10.1016/S0007-8506(07)63126-610.1016/S0007-8506(07)63126-6 ↗
19. Batzer , S.A. ; Subhash , G. ; Olson , W. ; Sutherland , J.W. ( 2002 ) Large strain constitutive model development for application to orthogonal machining . 5th CIRP International Workshop on Modeling of Machining Operations . West Lafayette , IN , USA : 31 – 40 .
20. 10.1088/0508-3443/12/5/30710.1088/0508-3443/12/5/307 ↗
21. 10.1016/j.precisioneng.2007.08.00310.1016/j.precisioneng.2007.08.003 ↗
22. 10.1016/0020-7403(88)90073-210.1016/0020-7403(88)90073-2 ↗
23. Chandrasekaran H. · Tranactions of ASME · 1965 · 87 · 495
24. 10.1081/MST-20005138010.1081/MST-200051380 ↗
25. 10.1016/j.ijmachtools.2006.02.00910.1016/j.ijmachtools.2006.02.009 ↗
26. 10.1016/j.ijmachtools.2009.07.01110.1016/j.ijmachtools.2009.07.011 ↗
27. 10.1080/1094034980894567310.1080/10940349808945673 ↗
28. Childs , T.H.C. ; Rahmad , R. ( 2007 ) The need and a proposal for improved friction modelling in metal cutting . International Conference on Tribology in Manufacturing Processes , ICTMP 2007 International Conference , Yokohama , Japan .
29. 10.1115/1.283682210.1115/1.2836822 ↗
30. 10.1016/j.ijmecsci.2005.01.01510.1016/j.ijmecsci.2005.01.015 ↗
31. Dambon O. · Proceedings of ASPE · 2007 · 40 · 3
32. DEFORM 2D, V8.0 ( 2004 ). User's Manual Scientific Technologies Corporation, Columbus, OH, USA .
33. 10.1007/s00170-008-1784-y10.1007/s00170-008-1784-y ↗
34. 10.1016/S0020-7403(01)00047-910.1016/S0020-7403(01)00047-9 ↗
35. 10.1016/j.ijmecsci.2005.06.00110.1016/j.ijmecsci.2005.06.001 ↗
36. 10.1016/S0890-6955(02)00006-810.1016/S0890-6955(02)00006-8 ↗
37. 10.1016/S0020-7403(99)00117-410.1016/S0020-7403(99)00117-4 ↗
38. Fischer C.E. · CIRP Workshop on High Performance Cutting · 2008 · 1
39. 10.1115/1.170462610.1115/1.1704626 ↗
40. 10.1016/S0924-0136(00)00635-X10.1016/S0924-0136(00)00635-X ↗
41. 10.1016/S0301-679X(00)00072-410.1016/S0301-679X(00)00072-4 ↗
42. 10.1016/j.jmatprotec.2005.02.13610.1016/j.jmatprotec.2005.02.136 ↗
43. 10.1016/S0924-0136(03)00462-X10.1016/S0924-0136(03)00462-X ↗
44. Guo Y.B. · Transactions of NAMRI/SME · 1998 · 207 · 207
45. 10.1115/1.128588510.1115/1.1285885 ↗
46. 10.1081/MST-12001624910.1081/MST-120016249 ↗
47. Hua J. · Materials Science and Engineering · 2005 · 394 · 23810.1016/j.msea.2004.11.011 ↗
48. 10.1016/j.jmatprotec.2005.06.08710.1016/j.jmatprotec.2005.06.087 ↗
49. Jaspers S.P.F.C. · 1999
50. 10.1016/S0924-0136(01)01228-610.1016/S0924-0136(01)01228-6 ↗
51. 10.1016/S0924-0136(01)01227-410.1016/S0924-0136(01)01227-4 ↗
52. Johnson , G.R. ; Cook , W.H. ( 1983 ) A constitutive model and data for metals subjected to large strain, high strain rates and high temperatures .7th International Symposium on Ballistics, The Hague , pp. 541 – 547 .
53. 10.1016/S0007-8506(07)61301-810.1016/S0007-8506(07)61301-8 ↗
54. Kim K.W. · Journal of Materials Processing Technology · 1999 · 86 · 4510.1016/S0924-0136(98)00230-1 ↗
55. Klamecki , B.E. ( 1973 ) Incipient Chip Formation in Metal Cutting—Three Dimension Finite Element Analysis, Ph.D. Thesis, University of Illinois .
56. 10.1504/IJMPT.2004.00424910.1504/IJMPT.2004.004249 ↗
57. 10.1016/S0924-0136(03)00719-210.1016/S0924-0136(03)00719-2 ↗
58. 10.1016/S0007-8506(07)61150-010.1016/S0007-8506(07)61150-0 ↗
59. 10.1016/j.jmatprotec.2007.05.01910.1016/j.jmatprotec.2007.05.019 ↗
60. Lee E.H. · ASME Transactions, Journal of Applied Mechanics · 1952 · 19 · 234
61. 10.1016/S0924-0136(97)00302-610.1016/S0924-0136(97)00302-6 ↗
62. 10.1115/1.283306210.1115/1.2833062 ↗
63. 10.1504/IJMPT.2009.02522110.1504/IJMPT.2009.025221 ↗
64. Leopold , J. ; Wohlgemuth , R. ( 2009 ) Modeling and simulation of burr formation: State-of-the-Art and future trends.Proceedings of the CIRP International Conference on Burrs, 2nd, University of Kaiserslautern, Germany, pp. 79–86 .10.1007/978-3-642-00568-8_9 ↗
65. 10.1016/S0890-6955(00)00106-110.1016/S0890-6955(00)00106-1 ↗
66. 10.1115/1.290416510.1115/1.2904165 ↗
67. 10.1016/0020-7403(93)90043-T10.1016/0020-7403(93)90043-T ↗
68. 10.1016/0020-7403(93)90042-S10.1016/0020-7403(93)90042-S ↗
69. 10.1016/S0020-7403(99)00042-910.1016/S0020-7403(99)00042-9 ↗
70. 10.1016/j.ijmachtools.2005.01.01110.1016/j.ijmachtools.2005.01.011 ↗
71. Maekawa K. · International Journal of the Japan Society for Precision Engineering · 1996 · 62 · 53510.2493/jjspe.62.535 ↗
72. Maekawa , K. ; Ohshima , I. ; Kubo , K. ; Kitagawa , T. ( 1994 ) The effect of cutting speed and feed on chip flow and tool wear in the machining of a titanium alloy.International Conference on Behavior of Materials in Machining, Warwick .
73. Maekawa K. · Bulletin of the Japan Society of Precision Engineering · 1983 · 17 · 167
74. 10.1016/0043-1648(81)90245-310.1016/0043-1648(81)90245-3 ↗
75. Merchant M.E. · Journal of Applied Mechanics · 1944 · 11 · 16810.1115/1.4009380 ↗
76. Meyer , L.W. ; Herzig , T.H.N. ( 2005 ) Determination of special material behaviour and development of constitutive equations for numerical simulations of high speed cutting processes.8th CIRP International Workshop on Modeling of Machining Operations. Chemnitz, Germany, pp. 131–138 .
77. 10.1081/MST-10010861710.1081/MST-100108617 ↗
78. 10.1016/j.commatsci.2003.08.02010.1016/j.commatsci.2003.08.020 ↗
79. 10.1016/j.jmatprotec.2004.04.29910.1016/j.jmatprotec.2004.04.299 ↗
80. 10.1016/j.commatsci.2004.09.01910.1016/j.commatsci.2004.09.019 ↗
81. Mohan , V. S. ; Balaji , A. K. ( 2002 ) On modeling the tool-chip contact in machining of plain carbon steels with multi-layer coated cutting tools.5th CIRP International Workshop on Modeling of Machining Operations, pp. 109–121 .
82. 10.1016/S0022-5096(98)00032-510.1016/S0022-5096(98)00032-5 ↗
83. 10.1016/S0007-8506(07)62547-510.1016/S0007-8506(07)62547-5 ↗
84. 10.1016/j.ijmachtools.2008.01.01310.1016/j.ijmachtools.2008.01.013 ↗
85. 10.1016/S0924-0136(02)00146-210.1016/S0924-0136(02)00146-2 ↗
86. 10.1016/j.cirp.2008.03.07610.1016/j.cirp.2008.03.076 ↗
87. Oxley , P.L.B. ( 1989 )Mechanics of Machining, An Analytical Approach to Assessing Machinability. Chichester, England, Ellis Horwood Limited .
88. Oxley , P.L.B. ; Welsh , M.J.M. ( 1963 ) Calculating shear angle in orthogonal metal cutting from fundamental stress-strain-strain rate properties of work material.International Machine Tool Design and Research Conference, pp. 73–86 .
89. 10.1016/S0924-0136(03)00278-410.1016/S0924-0136(03)00278-4 ↗
90. 10.1016/S0890-6955(99)00051-610.1016/S0890-6955(99)00051-6 ↗
91. 10.1016/j.jmatprotec.2004.04.16210.1016/j.jmatprotec.2004.04.162 ↗
92. 10.1115/1.48279110.1115/1.482791 ↗
93. Pfefferkorn F.E. · 2002
94. 10.1115/1.164454210.1115/1.1644542 ↗
95. 10.1016/j.ijmachtools.2008.12.01410.1016/j.ijmachtools.2008.12.014 ↗
96. 10.1007/BF0283403510.1007/BF02834035 ↗
97. 10.1504/IJMMM.2009.02692710.1504/IJMMM.2009.026927 ↗
98. 10.1016/S0017-9310(99)00217-310.1016/S0017-9310(99)00217-3 ↗
99. 10.1016/S0017-9310(99)00219-710.1016/S0017-9310(99)00219-7 ↗
100. 10.1016/j.simpat.2008.08.01010.1016/j.simpat.2008.08.010 ↗