journal article·2005-09

METHODOLOGY TO COMPARE 3-D AND 2-D PARAMETERS FOR THE OPTIMIZATION OF HARD TURNED SURFACES

Rayan Coutinho, Ioan D. Marinescu

Publisher page

Abstract

ABSTRACT Hard Turning provides an alternative to grinding in some finishing applications. Average Surface Roughness Ra has been widely used in industry to establish surface texture needed for a given application. It is known that the single parameter Ra is inadequate to define the functionality of a surface texture. The quality of a surface can be determined by the nature of its interaction with another surface. Thus a surface with significant peaks will not make as good a bearing surface as a surface with deep valleys and low peaks. Two different surfaces with similar values of Ra can behave differently under fatigue loading conditions. 3-D visualization of expected surface texture will facilitate optimization of machining parameters to produce function-specific surfaces. The advantages and shortcomings of some current surface texture prediction models are discussed. A new method based on neuro-fuzzy techniques is proposed. Optimization using some 3-D surface parameters was carried out and compared with the results of those obtained using 2-D parameters.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Advanced Measurement and Metrology Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Konig W. · Annals of the College International pour la Recherche en Productique (CIRP) · 1990 · 39 · 61
2. Sheehy T. · Manufacturing Engineering · 1997 · 100
3. Boggio U. · Manufacturing Engineering · 1996 · 95
4. Fleming M. · Industrial Diamond Review · 1998 · 4 · 128
5. Abay C. · Industrial Diamond Review · 2000 · 2 · 110
6. Knuefermann M. · Industrial Diamond Review · 2001 · 2 · 87
7. Davis E.J. · Surface Topography · 1988 · 1 · 229
8. Santochi M. · Annals of the College International pour la Recherche en Productique (CIRP) · 1982 · 31 · 431
9. 10.1016/0141-6359(84)90005-910.1016/0141-6359(84)90005-9 ↗
10. Griffiths B.J. · Surface Topography · 1998 · 1 · 61
11. Chiffre L. · Annals of the College International pour la Recherche en Productique (CIRP) · 2000 · 49 · 635
12. Peklenik J. · Annals of the College International pour la Recherche en Productique (CIRP) · 1967 · 25 · 381
13. Whitehouse D. · Annals of the College International pour la Recherche en Productique (CIRP) · 1974 · 23 · 265
14. 10.1016/S0890-6955(97)00099-010.1016/S0890-6955(97)00099-0 ↗
15. 10.1016/S0895-7177(98)00139-310.1016/S0895-7177(98)00139-3 ↗
16. 10.1016/S0890-6955(97)00100-410.1016/S0890-6955(97)00100-4 ↗
17. Shaw M. · 1997
18. Zhang G. · Transactions of the ASME, Journal of Engineering for Industry · 1991 · 113 · 149
19. Sata T. · Annals of the College International pour la Recherche en Productique (CIRP) · 1963 · 12 · 190
20. 10.1016/S0043-1648(98)00156-210.1016/S0043-1648(98)00156-2 ↗
21. 10.1016/S0924-0136(96)02818-X10.1016/S0924-0136(96)02818-X ↗
22. 10.1108/1359853971017080310.1108/13598539710170803 ↗
23. Feng , C. ( 2001 ). An Experimental Study of the Impact of Turning Parameters on Surface Roughness ; Proceedings of the 2001 Industrial Engineering Research Conference 2036 .
24. 10.1016/S0924-0136(01)00959-110.1016/S0924-0136(01)00959-1 ↗
25. 10.1016/S0924-0136(98)00079-X10.1016/S0924-0136(98)00079-X ↗
26. 10.1016/S0301-679X(99)00004-310.1016/S0301-679X(99)00004-3 ↗
27. 10.1016/0043-1648(95)06825-210.1016/0043-1648(95)06825-2 ↗
28. 10.1016/S0890-6955(97)00073-410.1016/S0890-6955(97)00073-4 ↗
29. 10.1016/0924-0136(94)90084-110.1016/0924-0136(94)90084-1 ↗
30. 10.1016/S0020-7403(98)00079-410.1016/S0020-7403(98)00079-4 ↗
31. 10.1016/S0924-0136(99)00183-110.1016/S0924-0136(99)00183-1 ↗
32. 10.1016/S0924-0136(00)00835-910.1016/S0924-0136(00)00835-9 ↗
33. Jang J. · 1997