journal article·2020-01-02

Tribochemical machining of polycrystalline diamond using ferrous tool materials

Pengzi Xu, Xiaoqin Zhou, Qiang Liu

Machining Science and Technology· Volume 24· Issue 1
Publisher page

Abstract

This article studies the tribochemical machining of polycrystalline diamond (PCD) by utilizing ferrous tool material as the cutter. The influence of cutting parameters and different ferrous materials on the material removal rate of the PCD workpiece has been investigated. The material removal rate increases with the increase of the rpm of ferrous “cutter”, AISI 1020 steel is unable realize the tribochemical machining, and the material removal rate of using AISI 1045 steel was higher than that of using W2-21/2 steel, e.g. when rpm was 3000, the material removal rate of using AISI 1045 was 0.059 mm/min, and using W2-21/2 it was 0.020 mm/min. The surface roughness of the machined PCD workpiece using W2-21/2 (0.40 μm) was slightly improved in comparison to that produced using AISI 1045 (0.47 μm). The influence of hydrogen catalysis on tribochemical machining of PCD has been investigated. Compared with no use of steam, if a large amount of steam is continuously injected the material removal rate will significantly increase, e.g. when the rpm was 3000 (using AISI 1045) the material removal rate of no steam was 0.059 mm/min, while with steam it was 0.082 mm/min.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Advanced machining processes and optimization · Tunneling and Rock Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Science and Engineering, Jilin University, Changchun, People’s Republic of China

Funding

Department of Education of Jilin Province

References (26)

Show source-provided references
1. 10.1063/1.502750710.1063/1.5027507 ↗
2. 10.1080/1094034990894568510.1080/10940349908945685 ↗
3. 10.1016/S1567-1739(01)00061-X10.1016/S1567-1739(01)00061-X ↗
4. 10.1016/0043-1648(84)90178-910.1016/0043-1648(84)90178-9 ↗
5. 10.1016/0043-1648(87)90120-710.1016/0043-1648(87)90120-7 ↗
6. 10.1007/s00170-017-1541-110.1007/s00170-017-1541-1 ↗
7. 10.1080/10910344.2012.64855610.1080/10910344.2012.648556 ↗
8. 10.1007/s12213-008-0013-y10.1007/s12213-008-0013-y ↗
9. 10.1299/kikaic.67.117610.1299/kikaic.67.1176 ↗
10. 10.1016/0141-6359(95)00019-410.1016/0141-6359(95)00019-4 ↗
11. Pierson H.O · 1993
12. 10.1080/1091034080229208410.1080/10910340802292084 ↗
13. 10.1016/S0925-4005(98)00214-710.1016/S0925-4005(98)00214-7 ↗
14. 10.1016/S0040-6090(98)01370-410.1016/S0040-6090(98)01370-4 ↗
15. 10.1021/acsami.7b1859610.1021/acsami.7b18596 ↗
16. 10.1080/1094034980894565610.1080/10940349808945656 ↗
17. 10.1016/S0007-8506(07)60644-110.1016/S0007-8506(07)60644-1 ↗
18. 10.4028/www.scientific.net/KEM.196.6910.4028/www.scientific.net/KEM.196.69 ↗
19. Tang Q. · Diamond and Related Materials · 2001 · 32
20. 10.1038/274792a010.1038/274792a0 ↗
21. 10.1016/0043-1648(80)90009-510.1016/0043-1648(80)90009-5 ↗
22. 10.1016/S0263-4368(00)00034-210.1016/S0263-4368(00)00034-2 ↗
23. 10.1016/j.tsf.2005.08.32210.1016/j.tsf.2005.08.322 ↗
24. 10.1016/0141-6359(80)90056-210.1016/0141-6359(80)90056-2 ↗
25. 10.1023/A:101861160440310.1023/A:1018611604403 ↗
26. 10.1016/S0925-9635(99)00117-X10.1016/S0925-9635(99)00117-X ↗