journal article·2018-01-02

Comparative evaluations of machining performance during turning of 17-4 PH stainless steel under cryogenic and wet machining conditions

P. Sivaiah, D. Chakradhar

Machining Science and Technology· Volume 22· Issue 1
Publisher page

Abstract

Productivity in machining of 17-4 PH stainless steel is adversely affected by the premature failure of tool and poor surface finish as a consequence of high cutting temperatures. Conventional cutting fluids not only create environmental and health problems but also fail to overcome the high cutting temperatures during machining. Cryogenic cooling is an environmentally clean cooling technology for attractive management of machining zone temperatures. The present study investigates the effect of cryogenic liquid nitrogen (LN2 at −196°C) on cutting temperatures, cutting forces (main cutting force, feed force), surface roughness, tool flank wear and chip morphology in turning of 17-4 PH stainless steel with AlTiN PVD-coated tungsten-coated carbide inserts and results were compared to wet machining. In overall, cryogenic machining reduces the cutting temperature, cutting forces, surface roughness and tool flank wear to a maximum of 73.4, 17.62, 44.29 and 55.55%, respectively. Improved chip breakability was found in cryogenic machining.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Metal Alloys Wear and Properties · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal, India

References (32)

Show source-provided references
1. Aoyama T. · 2008 · 57 · 125
2. Balazinski M. · 1994 · 116 · 516
3. Baradie M.A. · 1996 · 56 · 798
4. Bermingham M.J. · 2012 · 212 · 752
5. Bordin A. · 2015 · 328 · 89
6. Chien W. · 2003 · 140 · 340
7. Dhananchezian M. · 2011 · 26 · 781
8. Dhar N.R. · 2007 · 47 · 754
9. Dhar N.R. · 2001 · 249 · 932
10. Evans C. · 1991 · 40 · 571
11. Feng S. · 2000 · 1
12. Hong S.Y. · 2006 · 10 · 133
13. Hong S.Y. · 2000 · 2 · 157
14. Hong S.Y. · 2001 · 41 · 1417
15. Hong S.Y. · 1999 · 39 · 1065
16. Hong S.Y. · 2001 · 41 · 2271
17. Hong S.Y. · 2002 · 6 · 235
18. Hong S.Y. · 2001 · 41 · 2245
19. Kalyan Kumar K.V.B.S. · 2008 · 203 · 95
20. Kaynak Y. · 2014 · 72 · 919
21. Kaynak Y. · 2014 · 18 · 149
22. Khani S. · 2015 · 30 · 868
23. Klim Z. · 1996 · 195 · 206
24. Kochmanski P. · 2006 · 200 · 6558
25. Paul S. · 2006 · 10 · 87
26. Pawade R.S. · 2007 · 192 · 139
27. Sharma V.S. · 2009 · 49 · 435
28. Shaw M.C.
29. Shokrani A. · 2016 · 20 · 475
30. Sornakumar T. · 1993 · 12 · 455
31. Venugopal K.A. · 2007 · 47 · 12
32. Yildiz Y. · 2008 · 48 · 947