journal article·2002-10-09

CONCEPT OF MODEL BASED TAMPERING FOR IMPROVING PROCESS PERFORMANCE: AN ILLUSTRATIVE APPLICATION TO TURNING PROCESS

Raj Palanna, Satish T.S. Bukkapatnam

Publisher page

Abstract

Abstract This paper presents the concept of a methodology called Model Based Tampering (MBT), that considers the non-linear and stochastic nature of process dynamics, to compensate, in real-time, the effects of process degradation on the performance. The uniqueness of this concept emerges from the ability to combine and utilize the structures of the existing models to fit tractable and robust real-time control models in the form of low-dimensional nonlinear stochastic differential equations (n-SDEs). As an illustrative application of MBT, the minimization of diameter variation due to tool degradation in the turning process is considered. Through a series of simulation runs, the use of MBT was found to reduce diameter variation by 97%. The methodology is applicable to a wide range of manufacturing processes. Keywords: Nonlinearn-SDEFokker–PlanckModel fittingTool wear dynamics ACKNOWLEDGMENTS The authors thank the anonymous reviewers for their constructive comments that have helped improve this manuscript. Bukkapatnam acknowledges National Instruments as well as Powell Foundation Fellowship for supporting the reported research. Notes 1The authors note that the experimentation and models involved in the proof-of-concept validation of the modeling scheme are different from and unrelated to those employed in the simulation studies used to illustrate the overall MBT. While the experimentation domain was chosen to facilitate a basic proof-of-concept validation of the modeling scheme, the simulation domain was selected to enable a simple illustration of the MBT concept. 2The plots are also called the frequency–magnitude plots. The power spectrum is a plot of the magnitude-squares verses frequency. 4At this stage, the authors wish to emphasize that “model” in MBT refers to a control model that is developed from actual process observations, as opposed to a simulation model, which has been used to validate MBT. 5This illustrative example is unrelated to the experimentation presented in the previous section to validate the modeling scheme. Further, the model structures presented in Appendix B for the simulation model are unrelated to the structures presented in the previous section (i.e., Eq. Equation4). The simulation model was chosen to be different from the experimentation because the objective for the previous section is to present a simple illustration of the overall concept, while the objective of the previous section is to provide a convincing proof-of-concept for the new n-SDE modeling scheme, which forms the most critical part of the overall MBT methodology.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Probabilistic and Robust Engineering Design · Advanced Statistical Process Monitoring · Advanced Control Systems Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Evans J. R. · 1989
2. Tabenkin A. N. · Mach. Des. · 1984 · 99
4. Ulsoy A. G. · Trans. ASME: J. Dyn. Syst., Meas., Control · 1993 · 115 · 301
5. Bukkapatnam S.T. S. · Phys. Rev. E: Stat. Phys., Plasmas, Fluids, Relat. Interdiscip. Top. · 1995 · 52 · 237510.1103/PhysRevE.52.2375 ↗
6. Quesenberry C. P. · J. Qual. Technol. · 1988 · 20 · 22010.1080/00224065.1988.11979114 ↗
7. Sachs E. · IEEE Trans. Semicond. Manuf. · 1995 · 8 · 2610.1109/66.350755 ↗
8. English J. R. · IIE Trans. · 1990 · 22 · 22510.1080/07408179008964180 ↗
9. Box G.E. P. · Qual. Eng. · 1991 · 4 · 33110.1080/08982119108918912 ↗
10. Mehta N. K. · Int. J. Adv. Manuf. Technol. · 1995 · 10 · 27910.1007/BF01178981 ↗
11. Elbestawi M. A. · Trans. ASME: J. Dyn. Syst., Meas., Control · 1990 · 112 · 611
12. Kim T. · Int. J. Tools Manuf. · 1996 · 36 · 92510.1016/0890-6955(96)00097-1 ↗
13. Wu Z. · Int. J. Prod. Res. · 1998 · 36 · 157110.1080/002075498193174 ↗
14. Chao B. T. · Trans. ASME · 1958 · 311
15. Danai K. · Trans. ASME, Ser. B · 1987 · 109 · 39610.1115/1.3187145 ↗
16. Koren Y. · CIRP Semin. · 1970
17. Koren Y. · Trans. ASME: J. Dyn. Syst., Meas., Control · 1991 · 113 · 300
18. Nayfeh A. H. · 1994
19. Risken H. · 198910.1007/978-3-642-61544-3 ↗
20. Siegert S. · Eur. Lett. · 1998
21. Bukkapatnam S.T. S. · CIRP J. Manuf. Syst. · 1999 · 29 · 321
22. Usui E. · Trans ASME, Ser. B · 1978 · 23610.1115/1.3439415 ↗
23. Friedman G. J. · Int. J. Syst. Sci. · 1976 · 7 · 111310.1080/00207727608941993 ↗
24. Montgomery D. C. · 1976