journal article·2005-06

ANALYSIS OF SPARK ERODED CRATER FORMED UNDER GROWING PLASMA CHANNEL IN ELECTRO-DISCHARGE MACHINING

Deepak Kumar Panda, Rajat Kumar Bhoi

Publisher page

Abstract

ABSTRACT In electro-discharge machining, the occurrence of sparks cause material removal in the form of craters. These craters are due to melting and vaporization of workpiece over a localized area under the spark, which acts as the heat source. The crater under a single spark has been predicted by theoretical models adopting different approaches in solving the transient heat conduction equation, considering suitable assumptions with appropriate initial and boundary conditions. In the present work, a transient thermal model for a very large solid cylinder has been used to predict the size of the crater obtained under a single spark by determining the melting isotherm in both the axial and radial directions. An analytical study of the effect of plasma channel radius, heat flux, and pulse duration on the size of the crater has been made. Experiments are conducted using a commercial electro-discharge machine. The craters are measured under microscope and a comparison with theoretical results is presented. Subsequently, the nature of variation of crater diameter, crater depth and volume of material removed with respect to different machining parameters such as ‘ON’ time, ‘OFF’ time, and current have been explained by the theoretical results and it has been concluded that the plasma channel grows with respect to pulse duration such that at the end of the pulse the plasma channel radius becomes equal to the crater radius. Keywords: CraterHeat FluxIsothermON TimeOFF TimePulse DurationPlasma Channel Radius ACKNOWLEDGMENTS The authors wish to thank the anonymous referees for the valuable and constructive comments, which have contributed significantly in improving the original paper.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Springborn R.K. · 1967
2. Mirnoff N. · Electro Erosive Metalworking—Its Physical Fundamentals and Industrial Application. Microtecnic · 1965 · 19 · 149
3. 10.1243/PIME_PROC_1957_171_044_0210.1243/PIME_PROC_1957_171_044_02 ↗
4. Zingerman A.S. · SOV Physics-Solid · 1959 · 255
5. Loeb L.B. · 1939 · 631
6. 10.1063/1.35394210.1063/1.353942 ↗
7. Zolotych B.N. · Sov Physics-Tech Phys · 1959 · 4 · 1370
8. Zimanyi J. · Annals of CIRP · 1975 · 24 · 89
9. Drabinka S.I. · J. Expt. Phys. USSR · 1954 · 21 · 473
10. Snoeys R. · Annals of CIRP · 1972 · 21 · 39
11. Zingerman A.S. · SOV Physics-Solid · 1955 · 1 · 992
12. 10.1063/1.34399410.1063/1.343994 ↗
13. Carslaw M.S. · 1959
14. Snoeys R. · Annals of CIRP · 1971 · 20 · 35
15. 10.1115/1.324562110.1115/1.3245621 ↗
16. 10.1177/106206560201000260410.1177/1062065602010002604 ↗
17. Erdelyi , A. ( 1954 ).Tables of Integral Transforms. Vol. 1 , McGraw Hill , New York , p. 191 .
18. Gradshteyn , I.S. and Ryzhik , I.M. ( 1994 ).Table of Integrals, Series, and Products, 5th ed. , Academic Press , New York , p. 719 .
19. Abramowitz M. · 1972
20. 10.1063/1.34399510.1063/1.343995 ↗
21. Erden A. · Proc. IMTDR. · 1980 · 21 · 351