EXPLORING ONCE-PER-REVOLUTION AUDIO SIGNAL VARIANCE AS A CHATTER INDICATOR
Source abstract
Abstract
The purpose of this study is an evaluation of the statistical variance in the once-per-revolution sampled audio signal during milling as a chatter indicator. It is shown that, due to the synchronous and asynchronous nature of stable and unstable cuts, respectively, once-per-revolution sampling leads to a tight distribution of values for stable cuts, with a corresponding low variance, and a wider sample distribution for unstable cuts, with an associated high variance. A comparison of stability maps developed using: 1) analytic techniques, and 2) the variance from once-per-revolution sampled time-domain simulations is provided and good agreement is shown. Experimental agreement between the well-known Fast Fourier Transform (FFT) chatter detection method, that analyzes the content of the FFT spectrum for chatter frequencies, and the new variance-based technique is also demonstrated.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Measurement and Metrology Techniques · Advanced Sensor Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. den Hartog J. · 1985
2. Klein R. · Trans. ASME: J. Dyn. Syst., Meas., Control · 1975 · 97 · 172
3. Glase D. · Trans. ASME, Ser. B · 1979 · 101 · 36210.1115/1.3439519 ↗
4. Tewani S. · Int. J. Mach. Tools Manuf. · 1994 · 35 · 9110.1016/0890-6955(95)80009-3 ↗
5. Chung B. · J. Vib. Controls · 1997 · 3 · 270
6. Weck M. · Ann. CIRP · 1994 · 43 · 34510.1016/S0007-8506(07)62228-8 ↗
7. Agapiou J. · Ann. CIRP · 1995 · 44 · 38310.1016/S0007-8506(07)62347-6 ↗
8. Weck M. · Ann. CIRP · 1999 · 48 · 29710.1016/S0007-8506(07)63188-6 ↗
9. Smith S. · Ann. CIRP · 1999 · 48 · 29310.1016/S0007-8506(07)63187-4 ↗
10. Slavicek, J. The Effect of Irregular Tooth Pitch on Stability of Milling. Proceedings of the 6th MTDR Conference. pp.15–22. London: Pergamon Press.
11. Tlusty J. · Trans. NAMRI/SME · 1983 · 11 · 408
12. Vanherck, P. Increasing Milling Machine Productivity by Use of Cutters with Non Constant Cutting Edge Pitch. Proceedings of the 8th MTDR Conference. pp.947–960. Manchester: Pergamon Press.10.1016/B978-0-08-012629-6.50017-1 ↗
13. Altintas Y. · Trans. ASME J. Manuf. Sci. Eng. · 1999 · 121 · 17310.1115/1.2831201 ↗
14. Budak E. · Ann. CIRP · 2000 · 49 · 3110.1016/S0007-8506(07)62890-X ↗
15. Tlusty J. · Ann. CIRP · 1996 · 45 · 39310.1016/S0007-8506(07)63088-1 ↗
16. Davies M. · Ann. CIRP · 1998 · 47 · 5510.1016/S0007-8506(07)62784-X ↗
17. Smith S. · Ann. CIRP · 1998 · 47 · 30710.1016/S0007-8506(07)62839-X ↗
18. Schmitz T. · Ann. CIRP · 2000 · 49 · 30310.1016/S0007-8506(07)62951-5 ↗
19. Schmitz T. · Ann. CIRP · 1999 · 50 · 26310.1016/S0007-8506(07)62119-2 ↗
20. Schmitz T. · J. Manuf. Sci. Eng. · 2001 · 123 · 70010.1115/1.1392994 ↗
21. Smith S. · 1989 · 18
22. Smith S. · Ann. CIRP · 1992 · 41 · 43310.1016/S0007-8506(07)61238-4 ↗
23. Takemura T. · Ann. CIRP · 1974 · 23 · 121
24. Weck W. · Ann. CIRP · 1975 · 24 · 405
25. Sexton J. · Ann. CIRP · 1978 · 27 · 321
26. Tlusty J. · Ann. CIRP · 1983 · 33 · 56310.1016/S0007-8506(07)60184-X ↗
27. Inasaki I. · Ultrasonics · 1998 · 36 · 27310.1016/S0041-624X(97)00052-8 ↗
28. Delio T. · Trans. ASME, Ser. B · 1992 · 114 · 14610.1115/1.2899767 ↗
29. Guckenheimer J. · 198310.1007/978-1-4612-1140-2 ↗
30. Winfough W. · Trans. NAMRI/SME · 1995 · 23 · 163
31. Bowker A. · 1959
32. Altintas Y. · Ann. CIRP · 1995 · 44 · 35710.1016/S0007-8506(07)62342-7 ↗
33. Altintas Y. · Ann. CIRP · 1996 · 45 · 5910.1016/S0007-8506(07)63017-0 ↗
34. Budak E. · Trans. ASME: J. Dyn. Syst., Meas., Control · 1998 · 120 · 22
35. Tlusty J. · 1999
36. Weck M. · Ann. CIRP · 1977 · 26 · 397
37. Moon F. · 1987