journal article·1999-01

MACHINING TITANIUM AND ITS ALLOYS

Xiaoping Yang, C. Richard Liu

Publisher page

Abstract

Abstract Titanium and its alloys are attractive materials due to their unique high strength-weight ratio that is maintained at elevated temperatures and their exceptional corrosion resistance. The major application of titanium has been in the aerospace industry. However, the focus shift of market trends from military to commercial and aerospace to industry has also been reported. On the Other hand, titanium and its alloys are notorious for their poor thermal properties and are classified as difficult-to-machine materials. These properties limit the use of these materials especially in the commercial markets where cost is much more of a factor than in aerospace. Machining is an important manufacturing process because it is almost always involved if precision is required and is the most cost effective process for small volume production. This paper reviews the machining of titanium and its alloys and proposes potential research issues. Keywords: MachiningMachinabilityResidual StressSurface IntegrityTitanium.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Manufacturing Process and Optimization · Engineering Technology and Methodologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (75)

Show source-provided references
1. 10.1016/0261-3069(95)00044-510.1016/0261-3069(95)00044-5 ↗
2. 10.1243/PIME_PROC_1990_204_047_0210.1243/PIME_PROC_1990_204_047_02 ↗
3. Trucks H. E. · Machine and Tool BLUE BOOK · 1987 · 82 · 39
4. Boyer R. R. · Titanium '95: Science and Technology · 1995 · 41
5. Gorynin I. · 1992 · 1 · 65
6. Sakai K. · 1992 · 3 · 2659
7. Campbell J. D. · 1991 · 3
8. Donachie M. J. · 1982 · 3
9. Froes F. H. · 1996 · 399
10. Adams K. C. · Titanium 1994 Products and Applications Proceedings of the Technical Program from the 1994 International Conference · 1994 · 39
11. Hasson D. F. · 1982 · v
12. Siekmann H. J. · the Tool Engineer · 1955 · 78
13. 10.1016/0043-1648(83)90011-X10.1016/0043-1648(83)90011-X ↗
14. Yang X. · 1998 · 13
15. 1982 · 33
16. R. M. Brick , A. W. Pense , R. B. Gordon , “ Structure and Properties of Engineering Materials, Chapter 10, Titanium and Zirconium; Titanium Alloys, ” 233 – 253 ( 1977 ), McGRAW-HILL, 4thEdition.
17. Miska K. H. · 1982 · 10
18. Reinsch W. A. · 1982 · 51
19. Seagle S. R. · Metals Engineering Quarterly · 1968 · 8 · 1
20. Shaw M. C. · 1984
21. Shaw M. C. · 1965 · 1
22. Kahles J. F. · Journal of Metals · 1985 · 27
23. Anonymous · Manufacturing Engineering · 1993 · 67
24. Zlatin N. · Titanium Science and Technology · 1973 · 1 · 48910.1007/978-1-4757-1346-6_37 ↗
25. 10.1016/S0007-8506(07)62277-X10.1016/S0007-8506(07)62277-X ↗
26. 10.1016/0261-3069(93)90078-A10.1016/0261-3069(93)90078-A ↗
27. Konig W. · Proc. Conf. On the Influence of Metallurgy on Machinability, ASM Tech. · 1975 · 308
28. Colwell L.V. · Mechanical Engineering · 1953 · 461
29. Child H. C. · 1965 · 139
30. Motonishi S. · Kobelco Technology Review · 1987 · 2 · 28
31. Schoenig F. C. · Titanium · 1994 · 422
32. Rabinowicz E. · Metal Progress · 1954 · 65 · 107
33. Catt E. J. · 1965 · 143
34. 10.1016/0043-1648(93)90481-Z10.1016/0043-1648(93)90481-Z ↗
35. X. Yang , “ Test Report for the Measurement of Residual Stress for Ground Ti-6Ai-4V Alloy, ” School of Industrial Engineering, Purdue University ( September 1997 ).
36. C. R. Liu and X. Yang , “ The Scattering of the Residual Stress Produced by Turning and Grinding and Its Effect on fatigue Life, ” Submitted to Journal of Machining Science and Technology for Publication ( 1998 ).
37. 1981 · 4 · 763
38. Li F. · 1995 · 887
39. 10.1007/BF0274514710.1007/BF02745147 ↗
40. 10.1115/1.283101410.1115/1.2831014 ↗
41. 10.1016/0890-6955(94)90079-510.1016/0890-6955(94)90079-5 ↗
42. 10.1080/0020754920894816410.1080/00207549208948164 ↗
43. 10.1016/0921-5093(94)09595-N10.1016/0921-5093(94)09595-N ↗
44. 10.1016/0043-1648(81)90242-810.1016/0043-1648(81)90242-8 ↗
45. Komanduri R. · 1982 · 241
46. 10.1243/PIME_PROC_1994_208_057_0210.1243/PIME_PROC_1994_208_057_02 ↗
47. 10.1115/1.283101310.1115/1.2831013 ↗
48. von B. F. · 1982 · 257
49. 10.1016/0043-1648(82)90113-210.1016/0043-1648(82)90113-2 ↗
50. 10.1007/BF0283479010.1007/BF02834790 ↗
51. Konig W. · 1979 · 1.1
52. 10.1080/0020754750894299610.1080/00207547508942996 ↗
53. R. M. Freeman , Ph.D. Thesis, University of Birmingham ( 1974 ).
54. Kumagai N. · 1995 · 790
55. Dearnley P. A. · Materials Science and Technology · 1986 · 2 · 4710.1179/mst.1986.2.1.47 ↗
56. 10.1016/S0007-8506(07)63272-710.1016/S0007-8506(07)63272-7 ↗
57. Lee M. · 1982 · 275
58. Kolachev B. A. · 1995 · 782
59. 10.1016/S0043-1648(98)00201-410.1016/S0043-1648(98)00201-4 ↗
60. 10.1016/0736-5845(95)00029-110.1016/0736-5845(95)00029-1 ↗
61. S. Mittal , “ Feasibility of Single-Step Superfinish Hard Machining and Its Effect on Surface Integrity, ” Ph.D. thesis, Purdue University ( 1996 ). Major Professor , C. R. Liu .
62. Komanduri R. · Metals and materials · 1972 · 6 · 531
63. Lemaire J. C. · Metallurgical Trans. · 1972 · 3 · 47710.1007/BF02642052 ↗
64. Recht R. F. · Trans ASME · 1964 · 86 · 18910.1115/1.3629585 ↗
65. 10.1016/0025-5416(83)90200-810.1016/0025-5416(83)90200-8 ↗
66. 10.1016/S0007-8506(07)62385-310.1016/S0007-8506(07)62385-3 ↗
67. Walker T. J. · Proc. Of the 10th M.T.D.R. Conference · 1969 · 241
68. 1969
69. Zlatin N. · Modern Machine Shop · 1970 · 42 · 139
70. Silin S. S. · Soviet Engineering Research · 1989 · 9 · 71
71. 10.1115/1.283680510.1115/1.2836805 ↗
72. 10.1063/1.170758610.1063/1.1707586 ↗
73. 10.1080/1094034980894566010.1080/10940349808945660 ↗
74. Wang J. Y. · Proceedings of the International Mechanical Engineering Congress · 1998
75. J. Y. Wang and C. R. Liu , “ The Effect of Tool Flank Wear on the Heat Transfer, Thermal Damage and Cutting Mechanics in Finish Hard Turning, ” submitted for publication in Annals of CIRP, 1999 .10.1016/S0007-8506(07)63130-8 ↗