journal article·2001-11-30

NUMERICAL SIMULATIONS OF DUCTILE MACHINING OF SILICON NITRIDE WITH A CUTTING TOOL OF DEFINED GEOMETRY

Thimmaiah G. Kumbera, Harish P. Cherukuri, John A. Patten, Christopher J. Brand, Troy D. Marusich

Publisher page

Abstract

Abstract Recent experiments involving machining of silicon nitride at the micrometer scale has shown that silicon nitride behaves in a ductile fashion under high pressures and when the depth of cut is small. In this paper, a preliminary study of ductile machining of Silicon Nitride (Si3N4) using numerical simulations is reported. The commercial software package ADVANTEDGE is used to model the cutting process. The numerical simulations involve a parametric study carried out to understand the effects of cutting speed, feed, rake angle and tooltip radius to evaluate conditions that are conducive to brittle-to-ductile phase transition. The feed, tooltip radius and depth of cut are of the order of tens of micrometers and the cutting speeds range from 0.5 m/min to 300 m/min. The results indicate that machining of silicon nitride may be carried out in a ductile fashion for small tooltip radii, high negative rake angles and small depths of cut. Keywords: Silicon nitrideMachiningSimulationsSingle point diamond turning ACKNOWLEDGMENTS This work was made possible by funding from NSF under the grant EEC 9903838. The authors are also grateful to the members of the affiliate companies of the Center for Precision Metrology at UNC-Charlotte.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Advanced Machining and Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. Shin Y. C. · Machining Technology · 2000 · 11 · 1
2. Patten J. · 2000 · 87
3. 10.1016/S0007-8506(07)62219-710.1016/S0007-8506(07)62219-7 ↗
4. 10.1111/j.1151-2916.1995.tb08612.x10.1111/j.1151-2916.1995.tb08612.x ↗
5. Patten, J. Cutting tool edge radius and depth of cut influence on the generation of the high pressure phase transformation during ductile machining. Proceedings ASPE Spring Topical Meeting on Silicon Machining. Vol. 17, pp.88–91.
6. 10.1002/nme.162038210810.1002/nme.1620382108 ↗
7. 2001
8. Kumbera, T. G., Cherukuri, H. P., Patten, J. A., Brand, C. A. and Marusich, T. D. 2001. Numerical Simulation of Ductile machining of Silicon Nitride. Proc. of 16thAnnual meeting of ASPE. 2001, Washington, D.C.