journal article·2016-10

Numerical investigations of optimum turning parameters—AA2024-T351 aluminum alloy

Waqas Saleem, Muhammad Asad, Muhammad Zain-ul-abdein, Hassan Ijaz, Tarek Mabrouki

Machining Science and Technology· Volume 20· Issue 4
Publisher page

Abstract

Aerospace aluminum alloys have gained the prime significance due to their excellent machining characteristics. Numerous experimental and numerical studies have been conducted to establish the optimum cutting parameters of these alloys. In the numerical cutting models, the authenticity of computational results is suspected particularly because of the complex interaction at tool–chip interface, which involves a high material strain rate and thermal processes. The fidelity of cutting simulation results is appraised by a parametric sensitivity analysis and actual experimentation. In this research, the orthogonal turning of AA2024-T351 aluminum is simulated in Abaqus/Explicit by using a thermoviscoplastic damage model and Coulomb friction model for the contact interfaces. A parametric sensitivity analysis is performed to comprehend the chip morphology, tool–chip interface temperature, reaction force, and strain. Different simulations are performed with varied cutting speeds (200, 400, 600, and 800 m/min), rake angles (5°, 10°, 14.8°, 17.5°), feeds (0.3, 0.4 mm), and friction coefficients (0.1, 0.15). It is observed that an increased rake angle decreases the cutting force and increases tool–chip interface temperature. Similarly, the cutting depth has prominent effect on chip–tool interface temperature as compared to the friction. The computational results are found in close approximation with the published experimental data of AA2024-T351.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Surface Polishing Techniques · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Abaqus®/Explicit · 2007
2. Asad, M. (2010) Elaboration of concepts and methodologies to study peripheral down-cut milling process from macro-to-micro scales. Ph.D. thesis. INSA, Lyon, France. Thesis No: d ordre: 2010-ISAL-0058, http://theses.insa-lyon.fr/publication/2010ISAL0058/these.pdf
3. Asilturk I. · 2011 · 44 · 1697
4. Attanasioa A. · 2009 · 13 · 317
5. Axinte D.A. · 2001 · 41 · 719
6. Baker M. · 2005 · 167 · 1
7. Fang N. · 2005 · 45 · 1178
8. Han Z.Y. · 2014 · 15 · 447
9. Hassan I. · 2014 · 15 · 293
10. Hillerborg A. · 1976 · 6 · 773
11. Johnson G.R. · 1985 · 21 · 31
12. 10.1081/MST-10010861810.1081/MST-100108618 ↗
13. Li K. · 2002 · 127 · 309
14. Navas V. · 2012 · 61 · 48
15. Neseli S. · 2011 · 44 · 580
16. Nicolaou P. · 2002 · 124 · 840
17. Ozel T. · 2007 · 22 · 659
18. Patrik D. · 2004 · 147 · 181
19. Peng L. · 2000 · 105 · 43
20. Ravi S.A. · 2014 · 18 · 323
21. Saglam H. · 2006 · 46 · 132
22. Shi G. · 2002 · 38 · 863
23. Sreejith P.S. · 2000 · 101 · 287
24. Subbiah S. · 2008 · 474 · 283
25. Sutter G. · 2005 · 45 · 719
26. Teng X. · 2006 · 73 · 1653
27. Umbrello D. · 2008 · 196 · 79
28. Viggo T. · 2010 · 47 · 1611
29. Yahya D. · 2006 · 171 · 1
30. Yanda H. · 2010 · 42 · 179
31. Zhang X. · 2011a · 133 · 041010
32. Zhang Y.C. · 2011b · 47 · 850