Development of cutting force prediction model for carbon fiber reinforced polymers based on rotary ultrasonic slot milling
Source abstract
Abstract
Carbon fiber reinforced polymers (CFRP) have got widely increased applications in aviation, defense and other industries due to their properties of high specific strength/stiffness, high corrosion resistance and low-thermal expansion. The issues like excessive cutting forces and machining damages are encountered in machining due to heterogeneity, anisotropy and low heat dissipation of these materials. The cutting forces are required to be predicted/minimized through modeling. In this article, the novel axial and feed cutting force model has been developed and validated through rotary ultrasonic slot milling of CFRP composites. The variations less than 10% have been found between the measured and corresponding simulated values of the cutting forces. However, some higher variations have also been observed in the few cases mainly due to heterogeneity and anisotropy of such material. The cutting depth is a significant parameter for axial and feed forces, while the feed rate is significant for the axial force. Both the forces decreased with the increase of spindle speed, while they increased with the increase of feed rate and cutting depth. The developed models have been found to be robust and can be applied to optimize the cutting forces for such materials at the industry level.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering and Automation, Beihang University, Beijing Engineering Technological Research Center of High-Efficient and Green CNC Machining Process and Equipment, Beijing, China
Department of Mechanical Engineering, Institute of Space Technology, Islamabad, Pakistan
References (43)
Show source-provided references
1. Alberadi A. · 2016 · 86 · 691
2. Bertsche E. · 2013a · 65 · 1705
3. Bertsche E. · 2013b · 66 · 1119
4. Chen S.T. · 2011 · 51 · 95
5. Denkena, B.; Leon, L.D.; Hahmann, D. (2008). Ultrasonic assisted grinding of brittle materials-surface topography and process forces. Proc. 23rd Annual Meeting of the ASPE and the Twelfth ICPE, ASPE/ICPE: 384–387. Germany.
6. Ding K. · 2014 · 214 · 2900
7. Feng D.J. · 2006 · 17 · 1399
8. Geng D. · 2015 · 59 · 128
9. Gilmore R. · 1991 · 28 · 139
10. Gong H. · 2010 · 50 · 303
11. Groover M.P.
12. Halm R. · 1993 · 70 · 6
13. Jones R.M.
14. Kalla D. · 2010 · 50 · 882
15. Kataria R. · 2016 · 31 · 685
16. Kaw A.K.
17. Lau W.S. · 1990 · 30 · 297
18. Lauwers B. · 2010 · 1
19. Lawn B.R. · 1980 · 63 · 574
20. Li Z.C. · 2005 · 45 · 1402
21. Liu D.F. · 2012 · 52 · 77
22. Liu D.F. · 2012 · 94 · 1265
23. Liu J.W. · 2014 · 72 · 187
24. Lv D.X. · 2013 · 427 · 187
25. Marshall D.B. · 1982 · 65 · 561
26. Nath C. · 2008 · 48 · 965
27. Pei Z.J.
28. Pei Z.J. · 1999 · 39 · 1327
29. Pei Z.J. · 1994 · 1
30. Pei Z.J. · 1995 · 117 · 142
31. Qin N. · 13
32. Sheikh-Ahmad J.Y.
33. Singh R.P. · 2016 · 31 · 1795
34. Thoe T.B. · 1998 · 38 · 239
35. 10.1007/s00170-008-1905-710.1007/s00170-008-1905-7 ↗
36. Wang X.M. · 2003 · 43 · 1015
37. Xiao X. · 2014 · 75 · 1263
38. Xu W. · 2014 · 92 · 103
39. Ya G. · 2002 · 129 · 182
40. Yuan S. · 2016 · 86 · 37
41. Yuan S. · 2015 · 81 · 1223
42. Zhang C.L. · 2013 · 69 · 161
43. Zhao C.Y. · 2013 · 17 · 129