Enhancing surface characteristics of TC4 alloy through powder-mixed near-dry EDM surface strengthening
Source abstract
Abstract
This study significantly improved the microstructure and mechanical properties of the surface strengthening layer on TC4 titanium alloy by introducing composite powder working media of C + B4C and C + B4C + Al into near-dry EDM (PMND-EDM). Experimental results indicate that under the C + B4C condition, the reinforcement layer mainly forms phases such as TiC, TiB, Ti, Al3Ti and AlTi3; whereas after adding Al powder (C + B4C + Al), it promotes the reaction between the matrix and the medium, generating new reinforcing phases such as Al5Ti, Al3BC and B8C. The introduction of aluminum powder provides a molten environment, significantly reducing porosity and splatter droplets and decreasing the density and width of microcracks. Elemental distribution shows that B, C and Al elements are enriched in the transition zone at the edge of the discharge pit, while the central region is mainly composed of Ti. When processing with C + B4C + Al mixed powder at a peak current of 8.2 A, the microhardness of the reinforcement layer reaches approximately 1300 HV, which is more than four times the hardness of the matrix, attributed to the synergistic strengthening mechanism of multiple phases. Meanwhile, the material removal rate (MRR) is improved after adding Al powder. This work demonstrates the superior potential of multi-component powder design in tailoring surface integrity and mechanical properties of difficult-to-machine alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Machining and Optimization Techniques · Surface Treatment and Coatings · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Tianjin University of Technology and Education, Tianjin, China 300222
Tianjin Vocational Institute, Tianjin, China 300410
Yantai vocational college, Yantai, China 264670
School of Engineering, Huzhou University, Huzhou, China 313000
Funding
National Natural Science Foundation of China · Tianjin Research Innovation Project for Postgraduate Students · Science and Technology Program of Tianjin · Yantai Vocational College’s School-based Research Projects
References (28)
Show source-provided references
1. 10.3390/mi1108075410.3390/mi11080754 ↗
2. 10.1080/10910344.2023.219496110.1080/10910344.2023.2194961 ↗
3. 10.1007/s00339-021-04934-710.1007/s00339-021-04934-7 ↗
4. 10.3390/mi1307099810.3390/mi13070998 ↗
5. 10.1504/IJMMM.2020.10566110.1504/IJMMM.2020.105661 ↗
6. 10.1142/S021797922540023510.1142/S0217979225400235 ↗
7. 10.1016/j.jclepro.2018.04.07210.1016/j.jclepro.2018.04.072 ↗
8. Li, M.; Cai, L. (2017) Microstructure and properties of strengthening layer of TC4 alloy surface strengthened by powed-mixed near-dry EDM. Tezhong Zhuzao Ji Youse Hejin, 37(9): 1014–1017.
9. 10.1177/095440542095109310.1177/0954405420951093 ↗
10. 10.1007/s12206-025-0211-810.1007/s12206-025-0211-8 ↗
11. 10.1016/j.jmrt.2024.08.03710.1016/j.jmrt.2024.08.037 ↗
12. 10.1007/s00170-020-05278-x10.1007/s00170-020-05278-x ↗
13. 10.1016/j.jmatprotec.2023.11800010.1016/j.jmatprotec.2023.118000 ↗
14. 10.3390/coatings1310172510.3390/coatings13101725 ↗
15. 10.1088/1757-899X/1225/1/01206710.1088/1757-899X/1225/1/012067 ↗
16. 10.1016/j.jmapro.2021.10.03510.1016/j.jmapro.2021.10.035 ↗
17. 10.1007/s13369-020-05156-410.1007/s13369-020-05156-4 ↗
18. 10.3390/ma1603102210.3390/ma16031022 ↗
19. 10.1007/s11665-021-06116-110.1007/s11665-021-06116-1 ↗
20. 10.3390/pr1104128910.3390/pr11041289 ↗
21. 10.1007/s11665-024-09902-910.1007/s11665-024-09902-9 ↗
22. 10.3390/jmmp803012510.3390/jmmp8030125 ↗
23. 10.1016/j.matpr.2021.12.29810.1016/j.matpr.2021.12.298 ↗
24. 10.5545/sv-jme.2019.647510.5545/sv-jme.2019.6475 ↗
25. Sundriyal, S.; Walia, R.S. (2020) Experimental investigation of the Micro-hardness of EN-31 die steel in a powder-mixed near-dry electric discharge machining method. Journal of Mechanical Engineering/Strojniški Vestnik, 66(3).
26. 10.1007/s00170-021-07573-710.1007/s00170-021-07573-7 ↗
27. 10.1007/s00170-021-08221-w10.1007/s00170-021-08221-w ↗
28. 10.1002/adem.20190125810.1002/adem.201901258 ↗