Thermomechanical modeling of oblique turning in relation to tool-nose radius
Source abstract
Abstract
This article aims at predicting machining performances for oblique turning in relation to tool-nose radius. A new geometric analysis for the uncut chip area is proposed as function of depth of cut, feed rate, tool-nose radius, and edge direction angle. Cutting edge is discretized into increments and average uncut chip thickness, elementary direction angle and elementary depth of cut are determined for each one. A new thermomechanical model is developed for each increment which is supposed to be an oblique machining with single cutting edge. The predicted cutting force components are in good agreement with experimental data over a wide range of cutting conditions. In particular, the effect of tool-nose radius and cutting parameters on chip geometry, cutting temperature, and cutting force components are studied. It is underlined that tool-nose radius promotes the increase in radial force, however, its influence on the other parameters is negligible.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Advanced Machining and Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. 10.1243/PIME_PROC_1995_209_087_0210.1243/PIME_PROC_1995_209_087_02 ↗
2. 10.1080/1091034080230601710.1080/10910340802306017 ↗
3. 10.1016/S0360-8352(96)00234-310.1016/S0360-8352(96)00234-3 ↗
4. Boothroyd G. · Proceedings of the Institution of Mechanical Engineers · 177 · 789
5. Boothroyd G. · Proceedings of the IMechE, Part C, Journal of Mechanical Engineering Science · 8 · 264
6. 10.1016/0020-7357(64)90006-X10.1016/0020-7357(64)90006-X ↗
7. Colwell L.V. · Transactions of the ASME · 76 · 199
8. 10.1007/s00170-015-6801-310.1007/s00170-015-6801-3 ↗
9. Del-Prete A. · 14th CIRP Conference on Modelling of Machining Operations (CIRP CMMO), Procedia CIRP, Turin, Italy 13--14 June 2013, vol. 8: · 540
10. Denkena B. · Proceedings of the 8th CIRP Workshop on Modeling of Machining operations · 259
11. Dogra M. · Journal of Engineering Science and Technology Review · 4 · 110.25103/jestr.041.01 ↗
12. 10.1080/10402004.2012.69200710.1080/10402004.2012.692007 ↗
13. 10.1177/095440541247004710.1177/0954405412470047 ↗
14. Germain D. · 9th Int. Conf. High Speed Mach, December 8--10 2010, Metz, France.
15. 10.1016/S0301-679X(99)00004-310.1016/S0301-679X(99)00004-3 ↗
16. 10.1016/j.ijmachtools.2004.01.01510.1016/j.ijmachtools.2004.01.015 ↗
17. 10.1115/1.342822910.1115/1.3428229 ↗
18. Kishawy H.A. · Proceeding of IMECE, ASME · 6 · 13
19. Lee E.H · ASME Journal of Applied Mechanics · 18 · 40510.1115/1.4010357 ↗
20. 10.1080/10910344.2011.62092010.1080/10910344.2011.620920 ↗
21. Lurdos, O. (2008)Lois de Comportement et de Recristallisation Dynamique: Approche Empiriques et Physique, Thèse. Ecole Nationale Supérieur des Mines, Saint-Etienne
22. 10.1016/S0007-8506(07)61286-410.1016/S0007-8506(07)61286-4 ↗
23. 10.1063/1.170758610.1063/1.1707586 ↗
24. 10.1016/j.ijmachtools.2004.01.01810.1016/j.ijmachtools.2004.01.018 ↗
25. Moufki A. · International Journal of Machine Tools and Manufacture · 45 · 166
26. Muataz H.F. · International Conference on Advanced Computer Science Applications and Technologies (ACSAT), 26--28 Nov 2012, Kuala Lumpur, Malysia.
27. Oxley P.L.B. · Robotics and Computer-Integrated Manufacturing · 4 · 103
28. Özel T. · CIRP Annals-Manufacturing Technology · 58 · 73
29. 10.1080/10910344.2011.55795010.1080/10910344.2011.557950 ↗
30. Poletika M. F.
31. Pu Z. · 2nd CIRP Conf. Surf. Integr. (CSI), Procedia CIRP · 282
32. 10.1016/0020-7357(65)90015-610.1016/0020-7357(65)90015-6 ↗
33. 10.1016/j.matdes.2005.05.01510.1016/j.matdes.2005.05.015 ↗
34. 10.1051/meca/201203310.1051/meca/2012033 ↗
35. Sandvik Coromant (Ed.). (1994) Modern Metal Cutting, a Practical Handbook. Coromant Pub., Fair Lawn, NJ.
36. Smolenicki D. · CIRP Annals-Manufacturing Technology. Vol. 63: 97–100
37. Soldani, X. (2008)Modélisation Analytique de L'usinage a Grande Vitesse et Etude de L'usure en Cratère-Application au Tournage,Thèse. L.P.M.M, Metz.
38. Stephenson D.A. · Journal of Manufacturing Science and Engineering · 119 · 494
39. 10.3844/ajeassp.2010.102.10810.3844/ajeassp.2010.102.108 ↗
40. Sutherland J.W. · Proc. 16th North Am. Manf. Res. Cont · 264
41. 10.1016/j.ijmachtools.2004.09.01810.1016/j.ijmachtools.2004.09.018 ↗
42. 10.1016/0020-7357(76)90043-310.1016/0020-7357(76)90043-3 ↗
43. Thamma R. · Proceedings of the 2008 IAJC-IJME, International Conference, ISBN 978-1-60643-379-9.
44. 10.1016/S0890-6955(03)00155-X10.1016/S0890-6955(03)00155-X ↗
45. 10.1016/0890-6955(94)E0004-310.1016/0890-6955(94)E0004-3 ↗
46. 10.1243/095440504232354010.1243/0954405042323540 ↗
47. 10.1016/j.ijmachtools.2008.05.00110.1016/j.ijmachtools.2008.05.001 ↗
48. 10.1007/s00170-011-3384-510.1007/s00170-011-3384-5 ↗
49. Young H.T. · Proceedings of the Institution of Mechanical Engineers · 201 · 213
50. 10.1016/j.ijmachtools.2008.05.00310.1016/j.ijmachtools.2008.05.003 ↗
51. Zemzemi F.
52. Zorev N.N.