Characterization of machinability of sintered steel foams having different porosities during drilling operations
Source abstract
Abstract
Steel foams are a new class of engineering materials with exceptional structure and properties. Foams produced by powder metallurgy generally have a near-net shape, however, sometimes machining operations may be required. The presence of porosity in steel foams significantly affects the cutting process and causes poor machinability. This study deals with the evaluation of the machinability of Cu-Ni-Mo-based steel foams having different porosity produced by powder metallurgy. High speed steel and carbide-tipped drills were used for the drilling. All tests were performed in dry condition with drill diameter of 3 mm. The drilling characteristics were evaluated in terms of the surface roughness, chip formation, drilling force, tool wear, microstructure and hardness change after drilling. The machinability was also evaluated by measuring average width of breakout and skewness values of the hole drilled. The results indicated that the increase of porosity negatively affected the drilling quality of high porous steels. Both drills broke the chips in powder form and produced discontinuous chips. High porous parts exhibited higher hardness change as compared to lower ones. The carbide drill showed acceptable drilling forces and surface quality. HSS drill is not suitable for drilling due to poor hole quality and high drill wear.HighlightsSteel foams exhibit poor machinability due to highly porous structure.Porosity and tool type significantly affect the surface integrity of steel foams.Surface roughness and drill wear increased with increasing porosity; however, feed force decreased.Intense presence of pores decreases the tool life remarkably.The skewness values of hole are positive in all porosities.Carbide-tipped drill produced the finest hole quality.The larger damage was observed at the exit of the drilled holes with HSS drill.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Advanced machining processes and optimization · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Metallurgical and Materials Engineering Department, Engineering Faculty, Istanbul University-Cerrahpasa, Istanbul, Turkey
References (58)
Show source-provided references
1. 10.1115/1.318789210.1115/1.3187892 ↗
2. 10.1007/s11106-008-9021-710.1007/s11106-008-9021-7 ↗
3. Andersson O. · International Conference on Powder Metallurgy&Particulate Materials, Montreal · 2005 · 1
4. Ashby M.F. · 2000
5. 10.1016/j.matdes.2010.04.03810.1016/j.matdes.2010.04.038 ↗
6. 10.1016/j.scriptamat.2006.03.03910.1016/j.scriptamat.2006.03.039 ↗
7. 10.1016/S0079-6425(00)00002-510.1016/S0079-6425(00)00002-5 ↗
8. 10.1016/j.msea.2013.04.00910.1016/j.msea.2013.04.009 ↗
9. 10.1016/j.matdes.2013.03.09810.1016/j.matdes.2013.03.098 ↗
10. 10.1016/j.msea.2014.06.06410.1016/j.msea.2014.06.064 ↗
11. 10.1002/mawe.20040079210.1002/mawe.200400792 ↗
12. 10.1179/00325890222500159710.1179/003258902225001597 ↗
13. 10.1179/00325890166619410.1179/003258901666194 ↗
14. 10.1002/(SICI)1527-2648(200004)2:4<196::AID-ADEM196>3.0.CO;2-K10.1002/(SICI)1527-2648(200004)2:4<196::AID-ADEM196>3.0.CO;2-K ↗
15. Causton R.J. · Advenced in Powder Metallurgy Part Materials · 2003 · 7 · 154
16. Cimino T.M. · Advances in Powder Metallurgy & Particulate Materials · 1995 · 53 · 1689
17. 10.1016/j.procir.2013.05.04910.1016/j.procir.2013.05.049 ↗
18. Danninger H. · The International Journal of Powder Metallurgy · 1997 · 33 · 43
19. 10.1016/j.msea.2012.03.05410.1016/j.msea.2012.03.054 ↗
20. 10.1179/pom.1983.26.3.13710.1179/pom.1983.26.3.137 ↗
21. 10.1016/S0924-0136(02)00060-210.1016/S0924-0136(02)00060-2 ↗
22. Gagne M. · Advanced in Powder Metallurgy Part Materials · 1999 · 3 · 119
23. 10.1016/j.compstruct.2019.02.09910.1016/j.compstruct.2019.02.099 ↗
24. 10.1179/174329008X28670310.1179/174329008X286703 ↗
25. 10.1016/S0254-0584(00)00423-510.1016/S0254-0584(00)00423-5 ↗
26. Heidari, M. 2018, Material removal mechanism and surface integrity in ultraprecision cutting of porous materials. Doctoral Thesis, School of Science and Technology, Keio University.10.1016/j.precisioneng.2018.01.014 ↗
27. Höganäs. 2004a, Handbook for Machining of Sintered Steels: Guideline for Turning, Drilling and Tapping, Höganäs AB, Sweden.
28. Höganäs. 2004b, Handbook for Sintered Components: Höganäs iron and steel powder for sintered components, Höganäs AB, Sweden.
29. 10.1007/s12541-011-0026-710.1007/s12541-011-0026-7 ↗
30. 10.1179/pom.1994.37.2.13310.1179/pom.1994.37.2.133 ↗
31. 10.1007/s00170-011-3679-610.1007/s00170-011-3679-6 ↗
32. 10.1007/s00170-011-3196-710.1007/s00170-011-3196-7 ↗
33. Kendall, A.L. 2005, Tool Life and Tool Wear, Metals Handbook, 10th ed. Machining Processes, ASM International, 16: 666–677.
34. 10.1016/j.jmapro.2019.05.00910.1016/j.jmapro.2019.05.009 ↗
35. 10.1179/pom.1969.12.24.01810.1179/pom.1969.12.24.018 ↗
36. 10.1007/s13369-015-1854-z10.1007/s13369-015-1854-z ↗
37. 10.1007/s00170-018-2956-z10.1007/s00170-018-2956-z ↗
38. 10.1007/s10934-011-9491-810.1007/s10934-011-9491-8 ↗
39. 10.1016/j.procir.2014.03.09410.1016/j.procir.2014.03.094 ↗
40. 10.1080/10910344.2017.136589310.1080/10910344.2017.1365893 ↗
41. 10.1016/S0261-3069(02)00146-210.1016/S0261-3069(02)00146-2 ↗
42. 10.1080/10910344.2014.97180910.1080/10910344.2014.971809 ↗
43. 10.1016/S0924-0136(02)00176-010.1016/S0924-0136(02)00176-0 ↗
44. 10.1016/j.msea.2006.12.05010.1016/j.msea.2006.12.050 ↗
45. 10.1007/s11661-007-9187-510.1007/s11661-007-9187-5 ↗
46. 10.1007/s11661-007-9191-910.1007/s11661-007-9191-9 ↗
47. Robert-Perron E. · International Journal of Powder Metallurgy · 2007 · 43 · 49
48. 10.1016/j.msea.2005.05.01910.1016/j.msea.2005.05.019 ↗
49. Salak A. · 2005
50. 10.1016/j.jmatprotec.2006.02.01410.1016/j.jmatprotec.2006.02.014 ↗
51. 10.1016/S0026-0657(98)85009-110.1016/S0026-0657(98)85009-1 ↗
52. 10.1016/j.jcsr.2011.10.02810.1016/j.jcsr.2011.10.028 ↗
53. 10.1088/1757-899X/430/1/01201410.1088/1757-899X/430/1/012014 ↗
54. 10.1177/204129751039405710.1177/2041297510394057 ↗
55. 10.1016/B978-075067069-2/50007-310.1016/B978-075067069-2/50007-3 ↗
56. 10.1179/003258908X33423010.1179/003258908X334230 ↗
57. Wyatt J.E. · Journal of Industrial Technology · 2006 · 22 · 2
58. 10.1243/09544054JEM83210.1243/09544054JEM832 ↗