On the influence of Dendrocalamus giganteus bamboo microstructure on its mechanical behavior
Source abstract
Abstract
Abstract This paper reports the experimental results of the investigation on the microstructure of Dendrocalamus giganteus bamboo laminae and the influence on its mechanical properties. The laminae were extracted from the central culm sector and from specific wall thickness positions in order to identify the fiber volume fraction, porosity and other matrix constituents, due to the functionally gradient characteristic. Samples were prepared from each set of laminae, both for microanalysis and for mechanical testing, under proposed configurations. The microscale morphology was observed and characterized both qualitatively and quantitatively through transmitted and reflected light microscopy, scanning electron microscopy and X-ray microtomography. An original method was proposed to quantify porosity through a humidity variation test. Tension and compression tests were carried out and their results were discussed with respect to the bamboo microstructure. Additionally the modes of failure were registered and analyzed. Results show that voids constitute an expressive portion of the culm. The mechanical properties are dictated by the fiber volume fraction when the specimens were tested under tensile load and by the density variation when tested under compressive load.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bamboo properties and applications · Natural Fiber Reinforced Composites · Tree Root and Stability Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Hunter · 2002
2. Mechanical properties of bamboo, a natural composite10.1016/0015-0568(81)90023-3 ↗
3. The mechanical efficiency of natural materials10.1080/14786430410001680935 ↗
4. Composite structure and tensile properties of Mousou bamboo
5. Mechanical properties of functionally graded hierarchical bamboo structures10.1016/j.actbio.2011.06.008 ↗
6. Bamboo - a functionally graded composite correlation between microstructure and mechanical strength10.1007/s10853-005-4419-9 ↗
7. Bamboo: functionally graded composite material
8. Fiber texture and mechanical graded structure of bamboo10.1016/S1359-8368(96)00020-0 ↗
9. Stress evolution during electromigration in a bamboo structure10.1016/1359-6462(96)00077-2 ↗
10. The mechanical structures of bamboos in viewpoint of functionally gradient and composites materials10.1177/002199839603000703 ↗
11. Intelligent functionally graded material: bamboo10.1016/0961-9526(95)00037-N ↗
12. Bamboo and its role in climate change
13. Creep behavior of bamboo10.1016/j.conbuildmat.2014.05.024 ↗
14. Methods of determining transverse mechanical properties of full-culm bamboo10.1016/j.conbuildmat.2012.07.116 ↗
15. Experiments with rings to determine the anisotropic elastic constants of bamboo10.1016/j.conbuildmat.2011.12.089 ↗
16. Nanoscale structural and mechanical characterization of the cell wall of bamboo fibers10.1016/j.msec.2008.11.007 ↗
17. The mechanical properties of bamboo used in construction
18. Development of laminated bamboo lumber: review of processing, performance, and economical considerations10.1061/(ASCE)MT.1943-5533.0000253 ↗
19. Column buckling of structural bamboo10.1016/S0141-0296(02)00219-5 ↗
20. Mechanical properties of structural bamboo for bamboo scaffoldings10.1016/S0141-0296(01)00110-9 ↗
21. Stiffness and strength analysis of four layered laminate bamboo composite at macroscopic scale10.1016/j.compositesb.2012.07.048 ↗
22. Effects of layered structure on the physical and mechanical properties of laminated moso bamboo (Phyllosachys edulis) flooring10.1016/j.conbuildmat.2011.08.038 ↗
23. A low-technology approach toward fabrication of laminated bamboo lumber10.1016/j.conbuildmat.2011.10.046 ↗
24. A novel process to improve yield and mechanical performance of bamboo fiber reinforced composite via mechanical treatments10.1016/j.compositesb.2013.08.007 ↗
25. Effect of physical adhesion on mechanical behaviour of bamboo fibre reinforced thermoplastic composites10.1016/j.colsurfa.2012.11.018 ↗
26. Development of green composites consists of wood chips, bamboo fibers and biodegradable adhesive10.1016/j.compositesb.2009.04.004 ↗
27. Flexural modulus of unidirectional and random composites made from biodegradable resin and bamboo and kanaf fibers
28. Development of bamboo based polymer composites and their mechanical properties10.1016/j.compositesa.2003.09.017 ↗
29. Durability of bamboo-glass fiber reinforced polymer matrix hybrid composites10.1016/S0266-3538(02)00225-7 ↗
30. Chemical resistance and tensile properties of short bamboo fiber reinforced epoxy composites10.1177/073168449801701702 ↗
31. Analysis of the mechanical properties and micro-structure of bamboo-epoxy composites10.1007/BF02385729 ↗
32. Development and testing of bamboo-fibers reinforced plastic composites10.1177/002199838602000102 ↗
33. Krause · 2009
34. Tensile strength analysis of bamboo and layered laminate bamboo composites
35. Development of layered laminate bamboo composite and their mechanical properties10.1016/j.compositesb.2011.11.065 ↗
36. Comparative study of mechanical properties of bamboo laminae and their laminates with woods and wood based composites10.1016/j.compositesb.2013.12.061 ↗
37. Hybrid approach to determine the mechanical parameters of fibers and matrixes of bamboo10.1016/j.conbuildmat.2012.03.011 ↗
38. Comparison of the structure and flexural properties of Moso, Guadua and Tre Gai bamboo10.1016/j.conbuildmat.2015.04.042 ↗
39. Liese · 1998 · 203p
40. On the anatomy of asian bamboo’s, with special reference to their vascular bundles10.1007/BF00365061 ↗
41. Gibson · 2010
42. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
43. Non-local means denoising10.5201/ipol.2011.bcm_nlm ↗
44. Gonzalez · 2002
45. Brucker microCT. Skyscan Ctan. Kontich, Belgium. http://bruker-microct.com/products/ctan.htm. Accessed 09/13/2016.
46. ASTM D-3039 · 2008
47. ASTM D-3410 · 2008