journal article·2014-06

Influence of thermally activated alum sludge ash on the engineering properties of multiple-blended binders concretes

Haider M. Owaid, R. Hamid, M.R. Taha

Publisher page

Abstract

Abstract This paper investigates the influence of thermally activated alum sludge ash (AASA) as partial cement replacement on the engineering properties of binary and ternary blended binders concretes that incorporate silica fume (SF), ground granulated blast furnace slag (GGBS) and palm oil fuel ash (POFA). The water/binder ratio for all the types of mixes is fixed at 0.30. The results show that AASA exhibits pozzolanic behaviour and can be classified as a Class N (natural) pozzolan. The binary blended binders with 15% AASA cement replacement increased the compressive and the tensile strength of concrete up to 85.3 MPa and 5.38 MPa at 28 days, respectively, and further increases in the AASA content gradually reduced these strengths. All the ternary combinations performed better than the binary mixes with AASA for the same replacement levels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Act 672. Solid Waste and Public Cleansing Management; 2007. Laws of Malaysia .
2. Aminnudin MB. Study on characteristic, treatment and disposal of drinking water treatment plant residue. In: Proceedings of water Malaysia 2009: international conference on industry best practice (ICIBP2009). May. K. Lumpur, Malaysian Water Association (MWA); 2009, May 19–21.
3. Lightweight composite concrete produced with water treatment sludge and sawdust: thermal properties and potential application10.1016/j.conbuildmat.2010.06.012 ↗
4. Concretes and mortars recycled with water treatment sludge and construction and demolition rubble10.1016/j.conbuildmat.2008.11.001 ↗
5. Incorporation of sludge waste from water treatment plant into red ceramic10.1016/j.conbuildmat.2007.01.013 ↗
6. Influence of chemical and phase composition of mineral admixtures on their pozzolanic activity10.1680/adcr.2002.14.1.35 ↗
7. Study of the pozzolanicity of some bricks and clays10.1016/S0950-0618(96)00032-3 ↗
8. Standard UNE-EN 197–1. Composition, specifications and conformity criteria for common cements; 2005.
9. The effect of dehydroxylation/amorphization degree on pozzolanic activity of kaolinite10.1016/S0008-8846(02)00975-4 ↗
10. Effect of kaolin treatment temperature on mortar chloride permeability10.3989/mc.2007.v57.i285.39 ↗
11. Metakaolin and calcined Clays as pozzolans for concrete: a review10.1016/S0958-9465(00)00092-5 ↗
12. Neville · 2005
13. Property improvement of Portland cement by incorporating with metakaolin and slag10.1016/S0008-8846(02)01025-6 ↗
14. Strength and drying shrinkage properties of self-compacting concretes incorporating multi-system blended mineral admixtures10.1016/j.conbuildmat.2010.04.015 ↗
15. ASTM C 150-92. Standard specification for Portland cement. Annual Book of ASTM Standard. Vol. 04.02. Philadelphia; 1992.
16. ASTM C618-03. Standard specifications for coal fly ash and raw or calcined natural pozzolan for use in concrete. Annual Book of ASTM Standard. West Conshohocken (PA); 2003.
17. British Standard BS 1377: Part 3: (Clause 9). Electrometric method of pH determination for soil. London; 1990.
18. American Public Health Association (APHA). Standard Methods for the Examination of Water and Wastewater. 19th ed., Washington DC; 1999.
19. ASTM C311-02. Standard test methods for sampling and testing fly ash or natural pozzolans for use in portland-cement concrete. Annual Book of ASTM Standard. West Conshohocken (PA); 2002.
20. ASTM C 192/C 192M-02. Standard practice for making and curing concrete test specimens in the laboratory. Annual Book of ASTM Standard. West Conshohocken (PA); 2002.
21. ASTM C 143/C 143M–03. Standard test method for slump of hydraulic-cement concrete. Annual Book of ASTM Standard. West Conshohocken (PA); 2003.
22. British Standard Institution European Standard. BS EN 12390-3. Testing hardened concrete. Compressive strength of test specimens. London: BSI; 2002.
23. ASTM C 496/C 496M-04. Standard test method for splitting tensile strength of cylindrical concrete specimens. Annual Book of ASTM Standard. West Conshohocken (PA); 2004.
24. Utilization of cement incorporated with water treatment sludge
25. Characterization of alum sludge for reuse and disposal
26. Properties of blended cements with thermally activated kaolin10.1016/j.conbuildmat.2008.02.008 ↗
27. Microstructural characterisation of geopolymers synthesised from kaolinite/stilbite mixtures using XRD, MAS-NMR, SEM/EDX, TEM/EDX, and HREM10.1016/S0008-8846(02)00859-1 ↗
28. Insight into the physicochemical aspects of kaolins with different morphologies10.1016/j.clay.2012.10.003 ↗
29. Strength properties and durability aspects of high strength concrete using Korean metakaolin10.1016/j.conbuildmat.2006.05.007 ↗
30. Efficiency of calcined kaolin and silica fume as cement replacement material for strength performance10.1016/j.cemconres.2004.05.051 ↗
31. Effect of silica fume on mechanical properties of high-strength concrete10.1016/S0958-9465(03)00017-9 ↗
32. Strength of slag cement concrete cured in place and in other conditions
33. Influence of supplementary cementitious materials on engineering properties of high strength concrete10.1016/j.conbuildmat.2010.12.013 ↗
34. Influence of pozzolan from various by-product materials on mechanical properties of high-strength concrete10.1016/j.conbuildmat.2005.09.011 ↗
35. A study of the workability and compressive strength characteristics of corn cob ash blended cement concrete10.1016/j.conbuildmat.2007.12.004 ↗
36. Fresh properties of self-consolidating concrete incorporating palm oil fuel ash as a supplementary cementing material
37. Mohd Fadzil A, Megat Johari MA, Kairun Azizi MA, Badorul Hisham AB. Engineering properties of HPC using ternary blended cement containing metakaolin and fly ash as partial cement replacement materials. National seminar of civil engineering research (SEPKA2007). UTM, Skudai Johor, Malaysia; 2010.
38. Property improvement of Portland cement by incorporating with metakaolin and slag10.1016/S0008-8846(02)01025-6 ↗
39. A study on the properties of freshly mixed high performance concrete10.1016/S0008-8846(99)00108-8 ↗
40. Obtaining a pozzolanic addition from the controlled calcination of paper mill sludge. Performance in cement matrices10.3989/mc.2006.v56.i283.8 ↗
41. Strength and durability aspects of calcined kaolin-blended Portland cement mortar and concrete10.1016/S0958-9465(00)00091-3 ↗
42. Compressive strength, chloride diffusivity and pore structure of high performance metakaolin and silica fume concrete10.1016/j.conbuildmat.2005.07.001 ↗
43. Physical and pozzolanic action of mineral additions on the mechanical strength of high-performance concrete
44. Study on strength and corrosion performance for steel embedded in metakaolin blended concrete/mortar10.1016/j.conbuildmat.2006.10.003 ↗
45. Mechanical and durability properties of high performance concretes containing supplementary cementitious materials10.1016/j.conbuildmat.2009.08.045 ↗
46. Influence of mineral admixtures on compressive strength, gas permeability and carbonation of high performance concrete10.1016/j.conbuildmat.2008.08.021 ↗
47. Engineering and transport properties of high-strength green concrete containing high volume of ultrafine palm oil fuel ash10.1016/j.conbuildmat.2011.12.007 ↗
48. Use of palm oil fuel ash as a supplementary cementitious material for producing high-strength concrete10.1016/j.conbuildmat.2009.01.008 ↗
49. Ahmed MH, Omar RC, Malek MA, Noor NM, Thiruselvam S. Compressive strength of palm oil fuel ash concrete. In: Proceedings of the international conference on construction and building technology, Kuala Lumpur, Malaysia; 2008; June 16–20. p. 297–06.
50. Characteristics of a thermally activated alumino-silicate pozzolanic material and its use in concrete10.1016/0008-8846(95)00167-0 ↗
51. High strength concrete containing natural pozzolan and silica fume10.1016/S0958-9465(00)00037-8 ↗
52. Influence of silica fume on the tensile strength of concrete10.1016/j.cemconres.2004.05.024 ↗