journal article·2013-01

Effect of different sand grading on strength properties of cement grout

Siong Kang Lim, Cher Siang Tan, Kah Pin Chen, Min Lee Lee, Wah Peng Lee

Publisher page

Abstract

Abstract This paper aims to study the consistency and strength properties of cement grouts prepared with three different sand grading namely 100% passing through 1.18 mm sieve (P1.18 mm), 0.90 mm sieve (P0.90 mm) and 0.60 mm sieve (P0.60 mm), respectively. The measured flowing time indicated that the specimens with the finer sand grading had lower flowability than those of the coarser sand grading. As the results, the finer sand grading specimens required a higher water to cement ratio to achieve an equivalent workability. The specimens with the coarser sand grading obtained higher 7 and 28 days compressive strengths than those of the finer sand grading when the lower water to cement ratio was adopted (0.61–0.63). However, when the higher water to cement ratio (0.65–0.67) was used, the specimens with the finer sand grading achieved higher long-term compressive, flexural and splitting tensile strengths than those of the coarser sand grading.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Tunneling and Rock Mechanics · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Bowen · 1981
2. Bungey JH, Millard SG. Absorption and permeability tests. 3rd ed. In: Testing of concrete in structures. London: Chapman & Hall; 1996.10.4324/9780203487839 ↗
3. Nonveiller · 1989
4. Construction and design of cement grouting
5. Engineering properties of high volume slag cement grout in tropical climate
6. Bartos · 1992
7. Quantification of the water demand of sand in mortar10.1016/j.conbuildmat.2004.04.004 ↗
8. Influence of fine aggregate characteristics on the rheological properties of mortars10.1016/j.cemconcomp.2007.08.008 ↗
9. Influence of aggregates grading and water/cement ratio in workability and hardened properties of mortars10.1016/j.conbuildmat.2010.11.011 ↗
10. Influence of sand grading on the characteristics of mortars and soil-cement block masonry10.1016/j.conbuildmat.2007.06.014 ↗
11. ASTM C150. Standard specification for Portland cement. American Society of Testing and Materials; 2007.
12. BS 882. Specification for aggregates from natural sources for concrete. British Standard Institute; 1992.
13. ASTM C938. Standard practice for proportioning grout mixtures for preplaced-aggregate concrete. American Society of Testing and Materials; 2005.
14. ASTM C939. Standard test method for flow of grout for preplaced-aggregate concrete (flow cone method). American Society of Testing and Materials; 2005.
15. ASTM C 942. Standard test method for compressive strength of grouts for preplaced-aggregate concrete in the laboratory. American Society of Testing and Materials; 2005.
16. ASTM C 109/C. Test method for compressive strength of hydraulic cement mortars (using 2in or 50mm cube specimens). American Society of Testing and Materials; 2005.
17. ASTM C 348. Standard test method for flexural strength of hydraulic cement mortars. American Society of Testing and Materials; 2008.
18. ASTM C 349. Standard test method for compressive strength of hydraulic cement mortars (using portions of broken prisms in flexure). American Society of Testing and Materials; 2008.
19. ASTM C 496. Standard test method for splitting tensile strength of cylindrical concrete specimens. American Society of Testing and Materials; 1996.
20. Strength properties of self-compacting mortar mixed with GGBFS
21. Neville · 2009
22. Verbeck GJ, Helmuth RA. Structures and physical properties of cement paste, vol. 3. In: Proceeding of 5th international symposium on the chemistry of cement, Tokyo; 1968. p. 1–32.
23. Backscattered electron imaging of cement pastes hydrated at different temperatures10.1016/0008-8846(90)90085-C ↗