journal article·2006-12

Influence of physical and geometrical properties of granite and limestone aggregates on the durability of a C20/25 strength class concrete

F. Pacheco Torgal, J.P. Castro-Gomes

Publisher page

Abstract

Abstract This paper presents an experimental study to evaluate the influence of physical and geometrical properties of granite and limestone aggregates on the durability of a C20/25 strength class concrete. Different granite and limestone aggregates were collected from seven quarries. Physical, geometrical and mechanical properties of aggregates as well as the rock weathering state were quantify by several tests such as, abrasion, surface hardness, uniaxial compressive strength, ultrasonic pulse velocity, water absorption by capillarity, vacuum water absorption and oxygen permeability. Using aggregates from each quarry, several C20/25 strength class concrete mixes have been produced, with the same workability and volume proportions. Concrete specimens have been cured under water for 90 days; after that time concrete durability parameters were obtained through tests such as, vacuum water absorption, capillarity water absorption, water permeability and oxygen permeability. Relevant statistical correlations have been obtained between absorption and permeability test of rock material and rock deterioration state (weathering). Valid statistic correlation was also obtained between durability parameters as well as among aggregates geometrical properties and concrete durability parameters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. BS 8110: Part 1. Structural use of concrete – code of practice for design and construction. London: British Standard Institution, BSI; 1985.
2. Gaspar P, Brito J. Japanese specifications as a concrete durability design support tool. In: Repar 2000 conference, Lisboa; 2000. p. 39–48.
3. Consideration of durability of concrete structures: past, present, and future10.1007/BF02481560 ↗
4. LNEC Portuguese Standard E 378-1993. Concretes: cement use guide [only available in Portuguese].
5. NP-ENV 206. Concrete-performance, mixing, placement and conformity criteria, Portuguese Institute of Quality, IPQ; 1993.
6. LNEC Portuguese Standard E 373. Coarse aggregate for concrete and mortar mixing, conformity criteria characteristics, Lisboa; 1993.
7. Salta M, Gonçalves A, Bettencourt R. Influence of aggregates on concrete durability. In: Concreta 2000 conference, Porto.
8. Perméabilité du béton de peau, Le choix du granulat peut-il s’avérer un élément plus déterminant que le rapport E/C?
9. Santos L. Section evaluation of a granite weathering from Porto, Geological Engineering Master Thesis, Universidade Nova of Lisboa; 1995 [only available in Portuguese].
10. Nascimento U. Rock weatherability problem in civil engineering. Report No. 363, Civil Engineering National Laboratory, LNEC, Lisboa; 1970 [only available in Portuguese].
11. Castro Gomes JP, Pereira de Oliveira LA, Gonilho Pereira CN, Torgal FMASP. Absorption and permeability of inert as parameter of evaluation of the durability of the concrete. Engenharias 2001, Universidade da Beira Interior, Covilhã. p. 315–321 [only available in Portuguese].
12. A new gas permeameter for measuring the permeability of mortar and concrete
13. LNEC Portuguese Standard E392-1993. Concrete: oxygen permeability determination, Lisboa; 1993.
14. Castro-Gomes J, Oliveira L, Pereira C, Pacheco-Torgal F. Discussion of aggregate and concrete water absorption and permeability testing methodology, XXX IAHS. Coimbra, Portugal; September 9–12, 2002.
15. Castro-Gomes J, Oliveira L, Pereira C, Pacheco-Torgal F. Absorption and permeability tests of aggregates. In: 1st national congress of geotechnics, Lisbon; 2002 [only available in Portuguese].
16. LNEC Portuguese Standard E237. Aggregates: Los Angeles abrasion test, Lisboa; 1970.
17. ISRM. Suggested method for determination of the slake durability index, rock characterization testing and monitoring. In: Brown Et, editor, International Society of Rock Mechanics, ISRM suggested methods. NJ: Pergamon Press; 1981.
18. Rodrigues J, Delgado, Monteiro B. Suggested method for slake durability test, LNEC, Lisboa; 1994.
19. ISRM. Suggested methods for determining the uniaxial compressive strength and deformability of rock materials. In: Brown Et, editor, Rock characterization testing and monitoring, ISRM suggested methods. NJ: Pergamon Press; 1972.
20. LNEC Portuguese Standard E393. Concrete: determination of capillarity water absorption, Lisboa; 1970.
21. Pacheco-Torgal F. Influence of physical properties of aggregates on concrete durability. Master Thesis, FCTUC, Coimbra, Maio; 2002.
22. Velho L, Carapito S. Contribution for the study of calcareous rock from Ançã, Museum and Laboratory of Mineralogy and Geology, University of Coimbra. p. 60–72.
23. Saraiva AL. Geotechnical properties of granitic rock according to their weathering state: granite from Santa Comba Dão, Museum and Laboratory of mineralogy and geology, No. 93. University of Coimbra; 1982. p. 58–70.
24. CastroGomes JP, Rodrigues Carvalho JA, Pissarra Cavaleiro VM. Water absorption and oxygen permeability of Covilhã granit. Portuguese geotechnical congress, LNEC, Lisboa; 2001.
25. Gaffar BA. The effect of environmental curing condition on the gas and water permeability of concrete. Unpublished PhD Thesis, Civil Engineering Department, The University of Leeds, UK; 1995.
26. Cabrera JG, Cusens AR, Lynsdale CJ. Porosity and permeability as indicators of concrete performance, durability of structures. In: International association for bridge and structural engineering, IABSE symposium, Lisbon; 1989.
27. Faury · 1958
28. Lourenço, Jorge, Coutinho, José.-Automatic calculations for concrete mix selection. Faury and Bolomey methods. Comissão de Coordenação da Região Centro. Monografias Técnicas, Coimbra; 1986.
29. Metha · 1986