journal article·2014-06

Development of high performances concrete based on the addition of grinded dune sand and limestone rock using the mixture design modelling approach

R. Zaitri, M. Bederina, T. Bouziani, Z. Makhloufi, M. Hadjoudja

Publisher page

Abstract

Abstract This paper presents the results of an experimental program in which the mixture design modelling approach was used in order to optimize the composition of a high performance concrete (HPC) formulated from local materials of the area of Laghouat (Algeria). The valorised materials are mineral additions: siliceous and limestone additions, obtained by fine grinding of dune sand and sieving aggregate crushing waste respectively. Both additions are added by substitution to the cement content. In order to model the influence of cement content and the dosages of these additions on the properties of high performance concrete, an experimental plans method with three factors was used. Mathematical models that explain at best test results which were identified and developed in this work. The modelling was performed thanks to statistical analysis software JMP7 of Statistical American Systems SAS-Institute. The obtained results showed that the introduction of siliceous fillers (SF) and limestone fillers (LF) in cement (by substitution) leads to a significant improvement in mechanical strength in the medium and long term which allows us to formulate a high performance concrete. In addition, the workability has been also improved with this substitution. Moreover, it was also shown that the use of the derived models based on the experimental design approach is very interesting and helps us to understand the interactions between the different parameters of the studied mixture (cement content, SF-content and LF-content). Finally it should be noted that not only the physic-mechanical properties are encouraging, but the economic aspect is also very interesting.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. ACI defines high-performance concrete
2. High-performance concrete – stretching the paradigm
3. High-performance concrete defined for highway structures
4. Georges · 1998
5. Neville Adam M. Properties of concrete. 5th ed. p. cm; 2010. p. 799.
6. High-performance concrete for bridge decks
7. A new predictive model for compressive strength of HPC using gene expression programming10.1016/j.advengsoft.2011.09.014 ↗
8. Reuse of local sand: effect of lime stone filler proportion on the rheological and mechanical properties of different concrete sand10.1016/j.cemconres.2004.07.006 ↗
9. Drying shrinkage studies of wood sand concrete – effect of different wood treatments10.1016/j.conbuildmat.2012.06.010 ↗
10. Compressive strength and hydration with age of cement pastes containing dune sand powder10.1016/j.conbuildmat.2010.09.026 ↗
11. Properties of high strength concrete using white and dune sands under normal and autoclaved curing10.1016/j.conbuildmat.2011.07.057 ↗
12. Goupy J. The method experiment plans. Dunod, Paris; 1988 [in French].
13. Experiment design to evaluate interaction of high range water – reducer and antiwashout admixture in high-performance cement grout10.1016/S0008-8846(01)00496-3 ↗
14. Interaction diagrams to assess SCC mortars for different cement types10.1016/j.conbuildmat.2008.07.009 ↗
15. Statistical modelling of the coupled effect of mix design and rebar spacing on restricted flow characteristics of SCC10.1016/j.conbuildmat.2012.04.072 ↗
16. Goupy · 2007
17. NA 442. Algerian Standards, hydraulic binders – common Cements, Composition, Specification, IANOR, Algiers; 2003 [in French].
18. Effect of partial and total replacement of siliceous river sand with limestone crushed sand on the durability of mortars exposed to chemical solutions10.1016/j.conbuildmat.2013.05.037 ↗
19. Optimization of steel fiber reinforced concretes by means of statistical response surface method10.1016/S0958-9465(03)00161-6 ↗
20. Goupy J, Creighton L. Introduction to design of experiments with JMP examples». 3rd ed.; 2007. p. 439 [sas].
21. Goupy Jacques (2000). Design of experiments; Revue MODULAD; 2006 [in French].
22. Goupy J. Experience plans: the mixtures. Dunod. Paris. p. 285. ISBN 2 10 004218 1 [in French].
23. Assessment of fresh properties and compressive strength of self-compacting concrete made with different sand types by mixture design modelling approach10.1016/j.conbuildmat.2013.08.039 ↗
24. Aitcin CP. High performances concrete. Paris: Edition Eyrolles; 2001 [in French].
25. ACI 211. 1-91. Standard practice for selecting proportions for normal, heavyweight, and mass concrete. American Concrete Institute, Farmington Hills, Michigan; 1991.
26. Influence of natural pozzolan, silica fume and limestonefine on strength, acid resistance and microstructure of mortar10.1016/j.powtec.2014.01.046 ↗
27. İlker Bekir Topc¸u, Ali Uğurlu. Effect of the use of mineral filler on the properties of concrete. Cem Concr Res 2003;33:1071-1075.10.1016/S0008-8846(03)00015-2 ↗
28. Effect of limestone fillers the physic-mechanical properties of limestone concrete10.1016/j.phpro.2011.10.005 ↗
29. Resistance of limestone mortars with quaternary binders to sulfuric acid solution10.1016/j.conbuildmat.2011.06.050 ↗
30. The strength of limestone mortars with quaternary binders: leaching effect by demineralized water10.1016/j.conbuildmat.2012.04.112 ↗
31. Utilization of limestone powder to improve the properties of self-compacting concrete incorporating high volumes of untreated rice husk ash as fine aggregate10.1016/j.conbuildmat.2012.08.016 ↗
32. Use of increasing amounts of bagasse ash waste to produce self-compacting concrete by adding limestone powder waste10.1016/j.jclepro.2013.06.009 ↗
33. Binary and ternary effects of ground dune sand and blast furnace slag on the compressive strength of mortar10.1016/j.cemconcomp.2012.03.002 ↗