journal article·2012-01

Impact of aggregate packing on dynamic modulus of hot mix asphalt mixtures using three-dimensional discrete element method

Huanan Yu, Shihui Shen

Publisher page

Abstract

Abstract Aggregates are the major component of hot mix asphalt (HMA) mixtures. The properties of aggregates and the way of aggregate packing have important influence on the performance of HMA mixtures. Because the dynamic modulus is considered as the most important HMA property influencing the field fatigue and rutting performance of a flexible pavement and are used in the mechanistic-empirical pavement design guide for determining the stress–strain responses of the pavements, a study of the impact of aggregate packing on dynamic modulus will provide insight on the HMA mix design and the material performance evaluation. This paper studies the effect of aggregate size distribution and angularity distribution on dynamic modulus using a 3D discrete element method (DEM). Angular particles are generated using an image-based ball-clumping approach which requires significantly reduced number of balls and is capable of capturing the particle shape and angularity effect. These particles are assigned to the DEM dynamic modulus specimen based on the angularity distributions of the actual experimental specimen. A 3D DEM dynamic modulus model is thus established and calibrated using experimental data. This calibrated model is further used to evaluate how the different aggregate packing due to the change of the proportions of aggregate particles and the change of aggregate angularities can result in the change of dynamic modulus.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Field evaluation of Witczak and Hirsch Models for predicting dynamic modulus of hot-mix asphalt
2. Gabriel G, Thompson M. HMA dynamic modulus-temperature relations. Research report FHWA-ICT-07-006; 2007.
3. Christensen D, et al. A mix design manual for hot-mix asphalt. NCHRP 9-33 report; 2009.
4. AASHTO: TP 62-03. Standard method of test for determining dynamic modulus of hot-mix asphalt concrete mixture. Washington, DC: American Association of State Highway and Transportation officials; 2001.
5. Witczak MW, Fonseca OA. Revised predictive model for dynamic (complex) modulus of asphalt mixtures. Transportation research Record 1540. Washington, DC: Transportation Research Board; 1996.10.1177/0361198196154000103 ↗
6. Hirsch model for estimating the modulus of asphalt concrete
7. Modeling and experimental evaluation of the influence of aggregate blending on asphalt mixture strength10.3141/2180-06 ↗
8. You Z. Development of a micromechanical modeling approach to predict asphalt mixture stiffness using the discrete element method. PhD dissertation. University of Illinois at Urbana–Champaign; 2003.
9. Discrete element modeling of aggregate behavior in fouled railroad ballast. Recent advancement in soil behavior, in situ test methods, pile foundations, and tunneling
10. Evaluation of empirical and theoretical models to determine asphalt concrete stiffnesses at low temperatures_with discussion
11. Uddin W. A Micromechanical model for prediction of creep compliance and viscoelastic analysis of asphalt pavements. In: Presented at the 78th annual meeting of TRB, Washington, DC; 1999.
12. Contact based analysis of asphalt pavement with the effect of aggregate angularity10.1016/S0167-6636(99)00054-X ↗
13. Discrete-element method investigation of the resilient behavior of granular materials10.1061/(ASCE)0733-947X(2004)130:4(503) ↗
14. Lowery M, Zeghal M. Effect of particle tiffnesses on the resilient behaviour of aggregate materials. CANCAM 2003, Calgary, Alberta, June 1–6, 2003. p. 302–3.
15. Two-step approach to prediction of asphalt concrete modulus from two-phase micromechanical models10.1061/(ASCE)0899-1561(2005)17:4(407) ↗
16. Discrete element modeling to predict the modulus of asphalt concrete mixtures10.1061/(ASCE)0899-1561(2004)16:2(140) ↗
17. Estimates of elastic moduli for granular material with anisotropic random packing structure10.1016/0020-7683(94)00225-L ↗
18. DEM analysis of angular ballast breakage under cyclic loading10.1080/17486020701474962 ↗
19. Matsushima T, Saomoto H. Discrete element modeling for irregularly-shaped sand grains. In: Proceedings of the 5th European conference, numerical methods in geotechnical engineering, Paris, Fr., September 4–6, 2002. p. 239–46.
20. AASHTO TP 79: Standard method of test for determining the dynamic modulus and flow number for hot mix asphalt (HMA) using the asphalt mixture performance tester (AMPT), AASHTO Standards, Washington, DC; 2009.
21. Asphalt Institute. Superpave mix design. Superpave series No. 2 (SP-02). Asphalt Institute. Lexington, KY; 2001.
22. Washington state department of transportation. Materials manual – revision 2006-1. Washington State Department of Transportation. Olympia, WA; 2006.
23. PFC3D Manuals. General formation 1-2, verison 4.0. Itasca Consulting Group Inc., Minneapolis, MI; 2008.
24. Numerical modeling of discontinua10.1108/eb023851 ↗
25. Pan T, Tutumluer E, Carpenter SH. Effect of coarse aggregate morphology on resilient modulus of hot-mix asphalt. Transportation research Record (TRB) No. 1929, National Research Council, Washington, DC; 2005. p. 1–9.10.1177/0361198105192900101 ↗
26. Pan T. Investigation of coarse aggregate morphology affecting hot mix behavior using image analysis. Doctoral Dissertation of University of Illinois at Urbana-Champaign; 2006.
27. Shen S, Yu H. Determination of HMA voids in mineral aggregate based on the analysis of aggregate gradation and packing. In: 89th TRB annual meeting, Paper No. 10-0067; 2010.
28. Visualization and simulation of asphalt concrete with randomly generated three-dimensional models10.1061/(ASCE)0887-3801(2009)23:6(340) ↗
29. Accelerated discrete element modeling of asphalt-based materials with the frequency–temperature superposition principle
30. Abbas AR. Simulation of the micromechanical behavior of asphalt mixtures using the discrete element method. In: PhD dissertation. Department of civil and environmental engineering, Washington State University, Pullman; 2004.10.1061/40825(185)1 ↗