Laboratory investigation on volume proportioning scheme of mineral fillers in asphalt mixture
Source abstract
Abstract
Abstract A number of industrial and domestic wastes are being used as replacement of conventional fillers in asphalt mix. Since different fillers have different densities, conventional weight proportioning may give rise to excess or inadequate quantity of filler in the mix. Hence, volume proportioning for fillers is suggested in the present work. Fillers made up of brick dust, fly-ash, lime dust, recycled concrete waste aggregates dust and conventional stone dusts are studied. The fillers are characterized through uncompacted bulk density, particle size distribution, methylene blue, Blaine’s air permeability, scanning electron microscopy, X-ray diffraction and loss on ignition tests. Creep, indirect tensile strength and moisture sensitivity tests are performed on the asphalt mixes and the results are compared.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. ASTM D 242. Standard specification for mineral filler for bituminous paving mixtures. ASTM, West Conshohocken; 2009.
2. FHWA, National Highway Specifications Home, ; 2012 [accessed 16.07.12].
3. Properties of bituminous mixtures containing different fillers
4. Unique effects of hydrated lime filler on the performance-related properties of asphalt cements: physical and chemical interactions revisited10.1061/(ASCE)0899-1561(2005)17:2(207) ↗
5. MORT&H Specifications for Road and Bridge Works. Indian Roads Congress, New Delhi 2001.
6. Test Methods and Specification Criteria for Mineral Filler used in HMA, Project # 9-45, University of Wisconsin-Madison, ; 2010, [accessed 16.07.12].
7. The mechanisms of hydrated lime modification of asphalt mixtures: a state-of-the-art review10.1080/14680629.2012.743669 ↗
8. Potential of recycled fine aggregates powder as filler in asphalt mixture10.1016/j.conbuildmat.2011.04.022 ↗
9. Utilization of recycled brick powder as alternative filler in asphalt mixture10.1016/j.conbuildmat.2010.08.005 ↗
10. A study on engineering characteristics of asphalt concrete using filler with recycled waste lime10.1016/j.wasman.2006.11.011 ↗
11. Characterization of mineral fillers as asphalt fillers10.4028/www.scientific.net/MSF.659.471 ↗
12. Laboratory evaluation of incorporating waste ceramic materials into Portland cement and asphaltic concrete10.1016/j.conbuildmat.2009.08.024 ↗
13. A study on the engineering characteristics of asphalt concrete using filler with recycled waste lime10.1016/j.wasman.2006.11.011 ↗
14. Evaluation of baghouse fines in bituminous paving mixtures
15. Engineering properties of asphalt concrete made with recycled glass10.1016/S0921-3449(02)00007-1 ↗
16. Mechanical evaluation of asphalt-aggregate mixtures prepared with fly ash as filler replacement10.1139/L07-082 ↗
17. Characterization of fly ash bituminous concrete mixes10.1061/(ASCE)MT.1943-5533.0000125 ↗
18. Evaluation of andesite waste as mineral filler in asphaltic concrete mixture10.1016/j.conbuildmat.2011.12.093 ↗
19. Utilization of municipal solid waste incineration ash in stone mastic asphalt mixture: pavement performance and environmental impact10.1016/j.conbuildmat.2008.05.009 ↗
20. Effects of fillers on properties of asphalt-concrete mixture10.1061/(ASCE)TE.1943-5436.0000395 ↗
21. Mechanistic evaluation of fly ash asphalt concrete mixtures10.1061/(ASCE)0899-1561(1996)8:1(19) ↗
22. Functions of fillers in bituminous mixes
23. Influence of mineral filler particle size and type on rheological and performances properties of sma asphalt-filler mastics10.3923/ajaps.2012.522.537 ↗
24. Tayebali A, Malpass GA, Khosla NP. Effect of mineral filler type and amount on design and performance of asphalt concrete. In Transportation Research Record: Journal of the Transportation Research Board, Transportation Research Board of the National Academies, No. 1609, Washington, DC 1998; p. 36–43.10.3141/1609-05 ↗
25. Wang H, Al-Qadi IL, Faheem AF, Bahia HU, Yang SH, Reinke GH. Effect of mineral filler characteristics on asphalt mastic and mixture rutting potential. Transportation Research Record, Transportation Research Board, No. 2208, Transportation Research Board of the National Academies, Washington DC 2011; p. 33–39.10.3141/2208-05 ↗
26. Faheem AF, Hintz C, Bahia H, Al-Qadi IL. Influence of filler fractional voids on mastic and mixture performance. In Transportation Research Record: Journal of the Transportation Research Board, No. 4264, Transportation Research Board of the National Academies, Washington, D.C. 2012; p. 74–80.10.3141/2294-08 ↗
27. Jayaprakasan S. A study on influence of some fillers in bituminous mixes. Master’s thesis, submitted to Department of Civil Engineering, Indian Institute of Technology Kanpur, Kanpur; 2012.
28. IS 2386 (Part IV). Methods of test for aggregates for concrete. Bureau of Indian Standard, New Delhi; 1997, reaffirmed 2002.
29. IS 2386 (Part 1). Methods of test for aggregates for concrete. Bureau of Indian Standard, New Delhi; 1963, reaffirmed 2002.
30. IS 1203. Determination of penetration. Bureau of Indian Standard, New Delhi; 1978, reaffirmed 2004.
31. IS 1210. Determination of float test. Bureau of Indian Standard, New Delhi; 1978, reaffirmed 2004.
32. IS 1205. Determination of softening point. Bureau of Indian Standard, New Delhi; 1978, reaffirmed 2004.
33. IS 1209. Determination of flash point. Bureau of Indian Standard, New Delhi; 1978, reaffirmed 2004.
34. IS 1208. Determination of ductility. Bureau of Indian Standard, New Delhi; 1978, reaffirmed 2004.
35. ASTM C29. Standard test method for bulk density (“Unit weight”) and voids in aggregate. ASTM, West Conshohocken; 2009.
36. ASTM D422-63. Standard test method for particle-size Analysis of soils. ASTM, west Conshohocken; 2007.
37. BS 6031:2009. Code of practice for earthwork, BSI British standards. Chiswick, London; 2009.
38. ASTM C837-09. Standard test method for methylene blue index of clay. ASTM, West Conshohocken; 2009.
39. Relationship between Methylene blue value, initial soil suction and swell percent of expansive soils
40. Performance characteristics of bituminous concrete with industrial wastes as filler10.1061/(ASCE)MT.1943-5533.0000730 ↗
41. IS 4031 (Part 2). Methods of physical tests for hydraulic cement (determination of fineness by Blaine air permeability test). Bureau of Indian Standard, New Delhi; 1999.
42. Webmineral, , [accessed 08.12.13].
43. ASTM D7348-08. Standard test methods for loss on ignition (LOI) of solid combustion residues, ASTM, West Conshohocken; 2011.
44. ASTM D6931. Standard test method for indirect tensile (IDT) strength of bituminous mixtures. ASTM, West Conshohocken; 2012.
45. A study on engineering of asphalt concrete using filler with recycled waste lime10.1016/j.wasman.2006.11.011 ↗
46. ASTM D4867/D4867M-09. Standard test method for effect of moisture on Asphalt concrete paving mixtures. ASTM, West Conshohocken; 2009.
47. Little DN, Jones IV DR. Chemical and mechanical processes of moisture damage in hot-mix asphalt pavements. Moisture sensitivity of asphalt pavements a national seminar, transportation research board of the national academies, Washington, D.C., 2003; p. 37–73.
48. Epps J, Berger E, Anagnos JN. Treatments. Moisture sensitivity of asphalt pavements a national seminar, transportation research board of the national academies, Washington, D.C., 2003; p. 117–183.
49. Read · 2003
50. White TD, Haddock JE, Rismantojo E. Aggregate tests for hot-mix asphalt mixtures used in pavements. National cooperative highway research program, report 557, Transportation Research Board, Washington, D.C.; 2006.