The transition of fly ash-based geopolymer gels into ordered structures and the effect on the compressive strength
Source abstract
Abstract
This paper reports the investigation of microstructural properties associated with the transition of amorphous gels into more ordered structures in fly ash-based geopolymers. Three typical geopolymer mixes are synthesized with Class F fly ash and slag. Accelerated ageing scheme is performed at the 80 °C hydrothermal conditions, lasting for 90 days. It is observed that under the hydrothermal conditions, the two geopolymer pastes containing solely fly ash activated with sodium hydroxide and sodium silicate exhibit exhibit a common tendency to partial crystallization after 28 days. Crystalline zeolitic phases (including analcime) are detected by XRD and FTIR techniques. The SEM observation shows that the transition from the amorphous gels into more ordered structures takes place in the binder matrix randomly, rather than in pores or from particular structures. The blending of slag can reduce the transition (crystallization) trend, which is attributed to the formation of calcium containing gels. The decrease of compressive strength of geopolymer at late ageing stage can be correlated to the phase transition. Proper molecular designs of geopolymers to kinetically control the transition must be considered for the applications of this family of materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Building materials and conservation · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Costs and carbon emissions for geopolymer pastes in comparison to ordinary Portland cement10.1016/j.jclepro.2011.02.010 ↗
2. Minimising the global warming potential of clay based geopolymers10.1016/j.jclepro.2014.04.046 ↗
3. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
4. H. Liu, Application of alkali activate concrete in anti-corrosive concrete products, in: A Presentation at the International Conference on Alkali-Activated Cements and Concretes, 11–12 October 2014, Chongqing, China, 2014.
5. Geopolymers and related alkali-activated materials10.1146/annurev-matsci-070813-113515 ↗
6. Atomic structure of a cesium aluminosilicate geopolymer: a pair distribution function study10.1021/cm703369s ↗
7. The effects of temperature on the local structure of metakaolin-based geopolymer binder: a neutron pair distribution function investigation10.1111/j.1551-2916.2010.03906.x ↗
8. Quantitative kinetic and structural analysis of geopolymers. Part 1. The activation of metakaolin with sodium hydroxide10.1016/j.tca.2012.03.021 ↗
9. Quantitative kinetic and structural analysis of geopolymers. Part 2. Thermodynamics of sodium silicate activation of metakaolin10.1016/j.tca.2013.01.040 ↗
10. Accelerated ageing of geopolymers
11. Role of water in the synthesis of calcined kaolin-based geopolymer10.1016/j.clay.2008.09.003 ↗
12. Nanostructure/microstructure of fly ash geopolymers
13. Alkali activation of fly ashes. Part 1: effect of curing conditions on the carbonation of the reaction products10.1016/j.fuel.2005.03.030 ↗
14. An XRD study of the effect of the SiO2/Na2O ratio on the alkali activation of fly ash10.1016/j.cemconres.2007.01.013 ↗
15. Effect of concentration of alkaline liquid and curing time on strength and water absorption of geopolymer concrete
16. Hardjito · 2005
17. Assessment of phase formation in alkali activated low and high calcium fly ashes in building materials10.1016/j.conbuildmat.2009.11.007 ↗
18. Using fly ash to partially substitute metakaolin in geopolymer synthesis10.1016/j.clay.2013.12.025 ↗
19. Impact of alkali silica reaction on fly ash-based geopolymer concrete10.1061/(ASCE)MT.1943-5533.0000579 ↗
20. Preparation of large-sized analcime single crystals using the Geopolymer-Gels-Conversion (GGC) method10.1016/j.matlet.2014.07.122 ↗
21. Fly ash-based geopolymers: the relationship between composition, pore structure and efflorescence10.1016/j.cemconres.2014.06.004 ↗
22. Quantitative study of the reactivity of fly ash in geopolymerization by FTIR
23. Mechanical property and structure of alkali-activated fly ash and slag blends
24. A review: the comparison between alkali-activated slag (Si+ Ca) and metakaolin (Si+ Al) cements10.1016/j.cemconres.2010.03.020 ↗
25. (Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement10.1016/j.jeurceramsoc.2005.12.021 ↗
26. Zeolite synthesised from fused coal fly ash at low temperature using seawater for crystallization10.4177/CCGP-D-09-00004.1 ↗
27. What can vibrational spectroscopy tell about the structure of dissolved sodium silicates?10.1016/j.micromeso.2010.06.013 ↗
28. Adsorption of phenol and ο-chlorophenol on surface altered fly ash based molecular sieves10.1016/j.cej.2007.05.030 ↗
29. P. Thuadaij, A. Nuntiya, Synthesis of Na-x hydrate zeolite from fly ash and amorphous silica from rice husk ash by fusion with caustic soda prior to incubation, in: Proceeding of the International Conference on Chemistry and Chemical Process, Bangkok, 2011, pp. 69–73.
30. Beneficiation of Collie fly ash for synthesis of geopolymer Part 2–geopolymers10.1016/j.fuel.2013.04.015 ↗
31. S. Wallah, B.V. Rangan, Low-Calcium Fly Ash-based Geopolymer Concrete: Long-term Properties, Res Report-GC2, Curtin University, Australia, 2006, pp. 76–80.
32. High-strength geopolymer using fine high-calcium fly ash10.1061/(ASCE)MT.1943-5533.0000161 ↗
33. Effect of elevated temperature curing on properties of alkali-activated slag concrete10.1016/S0008-8846(99)00143-X ↗
34. Strength and drying shrinkage of alkali-activated slag paste and mortar10.1155/2012/579732 ↗
35. Workability and mechanical properties of alkali activated slag concrete10.1016/S0008-8846(98)00236-1 ↗
36. Drying and autogenous shrinkage of pastes and mortars with activated slag cement10.1016/j.cemconres.2007.11.002 ↗