Influence of different bonding and wrapping techniques on performance of beams strengthened in shear using CFRP reinforcement
Source abstract
Abstract
Abstract Promising results have been obtained from flexural strengthening of concrete elements using the grooving method in its special form of externally bonded reinforcement in grooves (EBRIG) to postpone CFRP debonding and load carrying capacity enhancement. Drawing upon these results, the present study aims to investigate the influence of the EBRIG and EBR methods used for shear strengthening of structural members when used with different techniques of installing CFRP sheets to provide sufficient bonding between CFRP sheets and the concrete substrate. For the purposes of this study, seven concrete beam specimens, 120 × 160 × 1400 mm in size, were cast and subjected to the 4-point loading test. External shear anchorages were provided for each span of the beams separately, therefore, each specimen was tested in two rounds and a total of 14 tests were performed. One specimen was used as the control beam without any strengthening and six were strengthened using either the EBR or the EBRIG methods. Results showed that, compared to control specimen without CFRP strengthening the EBRIG and EBR method combined with full wrapping technique led to a load carrying capacity enhancement up to an average percentage about 148% and 141%, and moreover, as a significant result the failure mechanism was observed to change from a brittle shear failure by utilizing EBR method to the desirable flexural mode by utilizing EBRIG method.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. ACI Committee 440 · 2008
2. Strength and ductility of concrete beams reinforced with carbon fiber-reinforced polymer plates and steel10.1061/(ASCE)1090-0268(2004)8:1(59) ↗
3. Review of the present and future utilization of FRP composites in the civil infrastructure with reference to their important in-service properties10.1016/j.conbuildmat.2010.04.062 ↗
4. Strengthening of reinforced concrete beams with externally bonded composite laminates
5. The effect of surface preparation on the bond interface between FRP sheets and concrete members10.1016/S0263-8223(01)00057-5 ↗
6. Towards modeling of reinforced concrete members with externally bonded fiber-reinforced polymer composites
7. Progress on understanding debonding problems in reinforced concrete and steel members strengthened using FRP composites10.1016/S0950-0618(03)00094-1 ↗
8. A numerical evaluation of the interlaminar stress state in externally FRP plated RC beams10.1016/S1359-8368(03)00018-0 ↗
9. Design model for shear capacity of RC beams strengthened with two-side CFRP wraps based on effective FRP strain concept10.1080/19648189.2015.1021382 ↗
10. Near-surface mounted FRP reinforcement: an emerging technique for strengthening structure10.1016/j.compositesb.2006.08.003 ↗
11. Bond strength of near surface-mounted FRP plate for retrofit of concrete structures10.1016/j.compstruct.2012.08.038 ↗
12. Behavior and capacity of RC beams strengthened in Shear with NSM FRP Reinforcement10.1016/j.conbuildmat.2007.08.014 ↗
13. Shear strengthening of reinforced concrete beams with NSM fiber-reinforced polymer rods
14. Grooving as alternative method of surface preparation to postpone debonding of FRP laminates in concrete beam
15. Experimental study on grooving detail for elimination of debonding of FRP sheets from concrete surface
16. Experimental study on effect of EBR and EBROG methods on debonding of FRP sheets used for shear strengthening of RC beams10.1016/j.compositesb.2012.09.081 ↗
17. Externally bonded reinforcement in grooves (EBRIG) technique to postpone debonding of FRP sheets in strengthened concrete beams10.1016/j.conbuildmat.2012.09.030 ↗
18. ACI Committee 318 · 2014
19. Shear behavior of reinforced concrete T-beams with externally bonded fiber-reinforced polymer sheets
20. Effect of transverse steel on the response of RC beams strengthened in shear by FRP: experimental study10.1061/(ASCE)1090-0268(2009)13:5(405) ↗
21. ACI Committee 211 · 2002
22. American Society of Testing and Materials (ASTM) · 2005
23. Ductility of FRP-concrete systems: investigations at different length scales10.1016/j.conbuildmat.2012.10.017 ↗