journal article·2017-05

Comparative assessment of pervious concrete mixtures containing fly ash and nanomaterials for compressive strength, physical durability, permeability, water quality performance and production cost

Valerie López-Carrasquillo, Sangchul Hwang

Publisher page

Abstract

Abstract Three optimized fly ash (FA)- and nanomaterial-added pervious concrete mixtures (PCNI, PCGP, PCNS) and one control PCCT were compared for five criteria: compressive strength, physical durability, permeability, water quality performance and production cost. Both nanoSiO2-added PCNS and nanoFe-added PCNI had a higher compressive strength (∼17 MPa), a greater resistance to abrasion ( 8 mm/s permeability) than other two PCs. Nevertheless, the production of the nanomaterial-added PCs was costly than the control PCCT. For those areas where a high compressive strength is not required, a cost-effective (∼$360/m3) PCCT could manage stormwater well for runoff quality and volume. Although PCGP could be produced with a high-volume FA substitution (60%), it was poor in other four criteria, especially in the compressive strength (4.7 MPa) and physical durability (59% mass loss).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Urban Stormwater Management Solutions · Concrete and Cement Materials Research · Asphalt Pavement Performance Evaluation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. ACI, American Concrete Institute Committee 522 · 2010
2. Optimum mix design of fly ash geopolymer paste and its use in pervious concrete for removal of fecal coliforms and phosphorus in water10.1016/j.conbuildmat.2015.05.034 ↗
3. Mix design and pollution control potential of pervious concrete with non-compliant waste fly ash10.1016/j.jenvman.2016.03.014 ↗
4. Nanotechnology in concrete – a review10.1016/j.conbuildmat.2010.03.014 ↗
5. A review of the multi-component utilisation of coal fly ash10.1016/j.fuel.2012.03.024 ↗
6. Optimization of concrete mixture with hybrid blends of metakaolin and fly ash using response surface method10.1016/j.compositesb.2014.01.017 ↗
7. Durability performance of concrete incorporating Class F and Class C fly ashes10.1016/j.conbuildmat.2012.02.075 ↗
8. Hwang · 2016
9. Pervious concrete reactive barrier for removal of heavy metals from acid mine drainage - column study10.1016/j.jhazmat.2016.10.027 ↗
10. ASTM C595/C595M-16 · 2016
11. ASTM C192/C192M-16a · 2016
12. ASTM D2434-68 · 2006
13. ASTM C39/C39M-16b · 2016
14. ASTM C1747/C1747M-13 · 2013
15. Assessing the abrasion resistance of cores in virgin and recycled aggregate pervious concrete10.1016/j.conbuildmat.2014.07.001 ↗
16. Escherichia coli and total coliforms in water and sediments at lake marinas10.1016/S0269-7491(02)00173-2 ↗
17. Bioretention column study: fecal coliform and total suspended solids reductions10.13031/2013.23636 ↗