Experimental study of carbon fiber reinforced alkali-activated slag composites with micro-encapsulated PCM for energy storage
Source abstract
Abstract
Abstract The use of cement composite with phase change materials (PCM) for thermal energy storage in building is one of the effective means because PCM can be integrated into building envelopes to reduce thermal stress and improve thermal comfort. However, the manufacturing of cement requires much energy and the process involves the emission of carbon dioxide and other undesirable gases to the environment. In this study, an alkali-activated slag (AAS) was used as an alternative to ordinary Portland cement (OPC) and incorporated with various proportions of graphite-modified microencapsulated PCM (MPCM) and carbon fibers (CF) for improving functional and mechanical properties. Tests on the mechanical properties, microstructure, thermal conductivity and thermal storage capacity of the AAS-MPCM composites were carried and compared with those properties the OPC-MPCM composites. Test results show that compressive strength of the AAS-MPCM composites were higher about 30% than the OPC-MPCM composite, but all the compressive strengths generally decreased with increasing MPCM content. CF can increase mechanical properties of both OPC-MPCM and AAS-MPCM dramatically. Compared with OPC-PCM, AAS-PCM has presented well thermal storage capacity. AAS with 20 wt% MPCM and 1 wt% CF obtained maximum different temperature value with 6.8 °C and it delay 2 min compared with the control samples. Based on the results, AAS-MPCM composites can be used as a promising alternative to cement-based MPCM composites in building components to effectively increase the thermal energy storage performance of building and reduce the energy consumption for cooling and heating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Energy Systems and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Combining thermal energy storage with buildings – a review10.1016/j.rser.2014.11.031 ↗
2. Benefits of PCM underfloor heating with PCM wallboards for space heating in winter10.1016/j.apenergy.2017.01.060 ↗
3. Using PCM embedded in building material for thermal management: performance assessment study10.1016/j.enbuild.2017.06.010 ↗
4. Reduced carbon emission estimates from fossil fuel combustion and cement production in China10.1038/nature14677 ↗
5. Experimental assessment of position of macro encapsulated phase change material in concrete walls on indoor temperatures and humidity levels10.1016/j.enbuild.2013.12.001 ↗
6. Materials used as PCM in thermal energy storage in buildings: a review10.1016/j.rser.2010.11.018 ↗
7. Experimental and numerical analysis on thermal performance of large-diameter cast-in-place energy pile constructed in soft ground10.1016/j.energy.2016.12.045 ↗
8. Field performance of an energy pile system for space heating10.1016/j.enbuild.2006.09.006 ↗
9. Design and preparation of carbon based composite phase change material for energy piles10.3390/ma10040391 ↗
10. Thermal properties of cement-based composites for geothermal energy applications10.3390/ma10050462 ↗
11. Application of phase change materials in gypsum boards to meet building energy conservation goals10.1016/j.enbuild.2016.12.046 ↗
12. Cool colored coating and phase change materials as complementary cooling strategies for building cooling load reduction in tropics10.1016/j.apenergy.2016.12.114 ↗
13. Development of composite pcms by incorporation of paraffin into various building materials10.3390/ma8020499 ↗
14. A novel phase-change cement composite for thermal energy storage: fabrication, thermal and mechanical properties10.1016/j.apenergy.2016.02.091 ↗
15. Very early-age reaction kinetics and microstructural development in alkali-activated slag10.1016/j.cemconcomp.2014.09.001 ↗
16. Influence of slag characteristics on strength development and reaction products in a CaO-activated slag system10.1016/j.cemconcomp.2016.06.005 ↗
17. Durability related transport properties of OPC and slag cement mortars hardened under different environmental conditions10.1016/j.conbuildmat.2011.07.064 ↗
18. Resistance of alkali-activated slag concrete to acid attack10.1016/S0008-8846(03)00125-X ↗
19. Thermal conductivity improvement of stearic acid using expanded graphite and carbon fiber for energy storage applications10.1016/j.renene.2006.11.011 ↗
20. Study on functional and mechanical properties of cement mortar with graphite-modified microencapsulated phase-change materials10.1016/j.enbuild.2015.07.043 ↗
21. Nano-PCMs for enhanced energy storage and passive cooling applications10.1016/j.applthermaleng.2016.03.161 ↗
22. Early-age temperature evolutions in concrete pavements containing microencapsulated phase change materials10.1016/j.conbuildmat.2017.04.150 ↗
23. Influence of adding phase change materials on the physical and mechanical properties of cement mortars10.1016/j.conbuildmat.2016.09.119 ↗
24. Microencapsulated phase change materials for enhancing the thermal performance of Portland cement concrete and geopolymer concrete for passive building applications10.1016/j.enconman.2016.11.061 ↗
25. Review of thermal energy storage technologies based on PCM application in buildings10.1016/j.enbuild.2013.08.006 ↗
26. Properties of cementitious mortar and concrete containing micro-encapsulated phase change materials10.1016/j.conbuildmat.2016.05.116 ↗
27. Reinforcement effect and mechanism of carbon fibers to mechanical and electrically conductive properties of cement-based materials10.1016/j.conbuildmat.2016.08.063 ↗
28. Thermal energy storage characteristics of bentonite-based composite PCMs with enhanced thermal conductivity as novel thermal storage building materials10.1016/j.enconman.2016.02.078 ↗