journal article·2018-05Open access

Testing of timber-to-timber screw-connections in hybrid configurations

Gianni Schiro, Ivan Giongo, Wendel Sebastian, Daniele Riccadonna, Maurizio Piazza

Abstract

Abstract This paper presents the results of an extensive experimental study on the short-term mechanical performance of timber screw connections comprising different types of fasteners (inserted at 45° and 90° to the grain) and different timber products (solid sawn timber, glued laminated timber, cross laminated timber and laminated veneer lumber) made from both softwood and hardwood species. Fifty-eight specimens laid out in fourteen arrangements were tested under quasi-static monotonic loading. The test configurations were meant to reproduce connections used in timber-to-timber hybrid composite structures for applications in both new constructions and retrofit interventions. Result comparisons regarding connection stiffness, strength, static ductility, residual strength and failure mode are presented and discussed. Additionally, the experimental data are used to check the extents of validity of existing analytical approaches (mainly developed for softwoods) to screw connections comprising hardwood elements. Practical aspects concerning screw insertion into hardwood elements are also addressed within the paper.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Masonry and Concrete Structural Analysis · Structural Analysis of Composite Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Self-tapping screws and threaded rods as reinforcement for structural elements10.1016/j.conbuildmat.2015.04.028 ↗
2. Connections for steel–timber hybrid prefabricated buildings. part I: experimental tests10.1016/j.conbuildmat.2015.12.002 ↗
3. I. Bejtka, H.J. Blass, Joints with inclined screws. In: Proceedings from meeting thirty-five of the international council for building research studies and documentation, CIB, Working Commission W18 – Timber Structure, Kyoto, Japan, 2002.
4. Theoretical and experimental analysis of timber-to-timber joints connected with inclined screws10.1016/j.conbuildmat.2010.03.007 ↗
5. I. Giongo, G. Schiro, M. Piazza, R. Tomasi, Long-term out-of-plane testing of timber floors strengthened with innovative timber-to-timber solutions, in: Proceedings of the World Conference on timber Engineering (WCTE), Vienna, Austria, 2016.
6. A review of the utilization of hardwoods for LVL10.1007/s002260050120 ↗
7. S. Aicher, Z. Christian, G. Dill-Langer, Hardwood glulams – emerging timber products of superior mechanical properties, in: Proceedings of the World Conference on timber Engineering (WCTE), Quebec City, Canada, 2014.
8. M. Knorz, J.W. Van de Kuilen, Development of a high-capacity engineered wood product – LVL made of European Beech, in: Proceedings of the World Conference on timber Engineering (WCTE), Auckland, New Zealand, 2012.
9. A. Misconel, M. Ballerini, J.W. Van de Kuilen, Steel-to-timber joints of beech-LVL with very high strength steel dowels. Proceedings of the World Conference on timber Engineering (WCTE), Vienna, Austria, 2016.
10. P. Kobel, R. Steiger, A. Frangi, Experimental analysis on the structural behaviour of connections with LVL made of Beech wood, in: Materials and Joints in Timber Structures, RILEM Bookseries 9, Springer, 2014, pp. 211–220.10.1007/978-94-007-7811-5_20 ↗
11. Nail and screw withdrawal strength of laminated veneer lumber made up hardwood and softwood layers10.1016/j.conbuildmat.2005.12.015 ↗
12. Withdrawal and lateral resistance of wood screw in beech, hornbeam and poplar10.1007/s00107-008-0294-9 ↗
13. Insight into mechanics of externally indeterminate hardwood–concrete composite beams10.1016/j.conbuildmat.2015.10.015 ↗
14. Theory of timber connections. International association of bridge and structural engineering
15. European Committee for Standardization · 2014
16. European Committee for Standardization · 2001
17. European Committee for Standardization · 1991
18. ETA (European Technical Approval) 14/0354: Glued laminated timber made of hardwood – Structural laminated veneer lumber made of beech.
19. European Committee for Standardization · 2009
20. Certificate of performance No. 0672-CPR-0415 (MPA Stuttgart 0672).
21. ETA (European Technical Approval) 12/0347: X-Lam Dolomiti – CLT.
22. ETA (European Technical Approval) 11/0190: Würth self-tapping screws.
23. ETA (European Technical Approval) 11/0030: Rotho Blaas self-tapping screws.
24. ETA (European Technical Approval) 12/0121: HECO-TOPIX-T and HECO-TOPIX-CC self-tapping screws.
25. ETA (European Technical Approval) 12/0063: SFS self-tapping screws WT.
26. European Committee for Standardization · 2005
27. M. Ballerini, Experimental investigation on parallel-to-grain wood-to-wood joints with self-tapping screws, in: Proceedings of the World Conference on timber Engineering (WCTE), Auckland, New Zealand, 2012.
28. M. Piazza, A. Polastri, R. Tomasi Ductility of timber joints under static and cyclic loads, in: Proceedings of the Institutional of Civil Engineers, Structures and buildings 164 April 2011 Issue SB2, 2011, pp. 79–90.10.1680/stbu.10.00017 ↗
29. General notes on ductility in timber structures10.1016/j.engstruct.2011.07.024 ↗
30. Withdrawal capacity of threaded rods embedded in timber elements10.1016/j.conbuildmat.2015.07.067 ↗
31. A. Kevarinmäki, Joints with inclined screws, in: Proceedings of meeting thirty-five of the international council for building research studies and documentations, CIB, Working Commission W18 – Timber Structures, Kyoto, Japan, 2002.
32. R.L. Hankinson, Investigation of crushing strength of spruce at varying angles of grain. Air Service Information Circular No. 259, U.S. Air Service, 1921.