journal article·2018-05

Experimental tests on the underwater abrasion of Engineered Cementitious Composites

Sallal R. Abid, Ali N. Hilo, Yasir H. Daek

Publisher page

Abstract

Abstract The abrasion of Engineered Cementitious Composites (ECC) due to waterborne materials in hydraulic structures was investigated using the ASTM C1138 abrasion test method. The test specimens were divided into two groups, the first was directed to study the effect of the PVA fiber content, while the second investigated the effect of the ECC covering layer thickness. The tests were conducted at ages of 3, 7 and 28 days. The test results showed that the abrasion resistance increases as PVA content increase. At an age of 28 days, incorporating low PVA contents (0.5% and 1.0%) increased the abrasion resistance by approximately 20%, while the inclusion of high PVA contents (1.5% and 2.0%) improved the abrasion resistance significantly with percentage improvements ranging from 50 to 95%. The percentage abrasion weight losses after 72 testing hours at this age were 7.6, 5.9, 4.7, 3.6 and 2.4% for fiber contents of 0, 0.5, 1.0, 1.5 and 2.0%, respectively. The test results also showed that covering of normal concrete with 1 cm layer of ECC is not effective during the early age of this material, while a layer of 3 cm thickness showed good abrasion resistance at early and mature ages.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Testing of concrete abrasion resistance in hydraulic structures on the Lower Sava River10.5545/sv-jme.2010.217 ↗
2. ACI 210R-03, Erosion of concrete in hydraulic structure, American Concrete Institute, ACI Committee 210; 2003.
3. The abrasion-resistance investigation of rubberized concrete10.1007/s11595-012-0619-8 ↗
4. Abrasion erosion of concrete by water-borne sand10.1016/j.cemconres.2005.03.018 ↗
5. Improving the abrasion resistance of hydraulic-concrete containing surface crack by adding silica fume10.1016/j.conbuildmat.2006.03.001 ↗
6. Impact abrasion of hydraulic structures concrete10.51400/2709-6998.1801 ↗
7. Abrasion resistance of concrete micro-reinforced with polypropylene fibers10.1016/j.conbuildmat.2011.07.044 ↗
8. A probability based model for the erosive wear of concrete by sediment bearing water10.1016/j.wear.2016.01.012 ↗
9. ASTM C1138 M-12 · 2012
10. DIN 52108 · 2010
11. Abrasion resistance of high-strength concrete in hydraulic structures10.1016/j.wear.2005.02.079 ↗
12. Abrasion resistance of high-performance hydraulic concrete with polypropylene fibers
13. Influence of class F fly ash on the abrasion–erosion resistance of high-strength concrete10.1016/j.conbuildmat.2005.06.051 ↗
14. Li · 2007
15. Mathematical model of abrasive wear of high performance concrete10.1016/j.wear.2006.12.008 ↗
16. Effect of water and cement ratio on compressive strength and abrasion of microsilica concrete
17. Abrasion resistance of alkali-activated slag concrete designed by Taguchi method10.1016/j.conbuildmat.2015.08.128 ↗
18. Galvao · 2012
19. ACI 544.1R, State-of-the-art report on fiber reinforced concrete, American Concrete Institute, ACI Committee 544; 2002
20. Hydro-abrasive erosion of high performance fibre-reinforced concrete10.1016/j.wear.2008.11.010 ↗
21. Abrasion properties of steel fiber reinforced silica fume concrete according to Los Angeles and water abrasion tests
22. ASTM C418-12 · 2012
23. ASTM C779/C779M-12 · 2012
24. ASTM C944/C944M-12 · 2012