Rutting and fatigue performance of asphalt mixtures containing amorphous carbon as filler and binder modifier
Source abstract
Abstract
Abstract In this research amorphous carbon (AC) powder, a waste by-product from paraffin production, was used as a bitumen additive and filler material in asphalt mixtures to investigate its influence on rutting and fatigue behavior of asphalt binder and mixtures. For this purpose, multiple stress creep recovery and time sweep tests were conducted on asphalt binders; dynamic creep, Hamburg wheel track and four point bending beam fatigue tests were carried out as asphalt mixture tests to evaluate fatigue and rutting behavior of asphalt binders and mixtures. Results revealed that replacing up to 50% of filler material by AC powder improved the rutting performance and did not have substantial negative effect on fatigue resistance of asphalt mixtures. Using AC powder as bitumen modifier enhanced rutting resistance of both asphalt binders and their corresponding mixtures substantially. However, in spite of enhancing the rutting resistance and fatigue life at low strain levels, the use of more than 5% AC powder as a bitumen additive impaired the fatigue resistance of asphalt mixtures when exposed to high strain levels. From the results of this study to enhance rutting and fatigue performance of asphalt mixtures incorporation of 50% AC powder as filler material by weight of total filler, and 5% AC powder as bitumen additive is recommended.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Effect of copper slag on performance of warm mix asphalt
2. Investigation of rutting performance of WMA mixtures containing copper slag
3. Characterization of rutting resistance of EBS-modified asphalt mixtures10.1080/10916466.2016.1181655 ↗
4. Evaluation of fatigue behavior of hot mix asphalt mixtures prepared by bentonite modified bitumen10.1016/j.conbuildmat.2014.06.066 ↗
5. S.R. Tangella, J. Craus, J. Deacon, C. Monismith, Summary report on fatigue response of asphalt mixtures, 1990.
6. Evaluating the rutting resistance of asphalt mixtures using an advanced repeated load permanent deformation test under field conditions10.1016/j.conbuildmat.2014.02.052 ↗
7. Resistance to permanent deformation of base courses asphalt concretes made with RAP aggregate and steel slag
8. Rutting resistance of stone mastic asphalts with steel slag and coal ash
9. Effect of aggregate properties on asphalt mixtures stripping and creep behavior10.1016/j.conbuildmat.2005.07.014 ↗
10. High-temperature performance of gilsonite-modified asphalt binder and asphalt concrete10.1080/10916466.2016.1230750 ↗
11. Relationship between multiple stress creep recovery (MSCR) binder test results and asphalt concrete rutting resistance in Brazilian roadways10.1016/j.conbuildmat.2017.03.216 ↗
12. Laboratory investigation of rutting performance of warm mix asphalt containing high content of reclaimed asphalt pavement10.1080/10916466.2017.1316738 ↗
13. Effects of high friction aggregate and PG Plus binder on rutting resistance of hot mix asphalt mixtures10.1080/10298436.2015.1065996 ↗
14. Improvement of evaluation indicator of interfacial interaction between asphalt binder and mineral fillers10.1016/j.conbuildmat.2017.05.003 ↗
15. Research on high-and low-temperature properties of asphalt-mineral filler mastic10.1061/(ASCE)MT.1943-5533.0000015 ↗
16. Experimental study on stiffness development of asphalt mixture containing cement and Ca(OH)2 as contribution filler10.1016/j.matdes.2015.02.026 ↗
17. Effects of mineral fillers on hot-mix asphalt laboratory-measured properties10.1080/10298430600819170 ↗
18. “Effect of filler type and content on properties of asphalt concrete mixes10.1520/STP24214S ↗
19. Mechanistic properties of hot-mix asphalt mixtures containing hydrated lime10.3141/2051-07 ↗
20. Mechanistic evaluation of lime-modified asphalt concrete mixtures
21. Effect of coal waste powder in hot mix asphalt compared to conventional fillers: mix mechanical properties and environmental impacts10.1016/j.jclepro.2014.11.078 ↗
22. Effect of cement kiln dust on the low-temperature durability and fatigue life of hot mix asphalt10.1016/j.coldregions.2014.11.010 ↗
23. Moisture damage resistance of hot-mix asphalt made with paper industry wastes as filler10.1016/j.jclepro.2015.06.016 ↗
24. A preliminary study of the mechanical properties of asphalt mixture containing bottom ash10.1139/L08-071 ↗
25. Evaluation of rice husk ash as filler in hot mix asphalt concrete10.1016/j.conbuildmat.2013.06.029 ↗
26. Investigation of using granite sludge as filler in bituminous hot mixtures10.1016/j.conbuildmat.2012.04.069 ↗
27. Utilization of recycled brick powder as alternative filler in asphalt mixture10.1016/j.conbuildmat.2010.08.005 ↗
28. Laboratory investigation of hot mix asphalt containing waste materials10.1080/14680629.2016.1189349 ↗
29. Application of coal waste powder as filler in hot mix asphalt10.1016/j.conbuildmat.2014.06.002 ↗
30. Assessment of mechanical properties of rice husk ash modified asphalt mixture10.1016/j.conbuildmat.2017.05.127 ↗
31. Laboratory investigation on the properties of asphalt concrete mixture with Rice Husk Ash as filler10.1016/j.conbuildmat.2016.09.070 ↗
32. Polymer modification of bitumen: advances and challenges10.1016/j.eurpolymj.2014.02.005 ↗
33. A review of advances of nanotechnology in asphalt mixtures10.1016/j.sbspro.2013.08.144 ↗
34. Fatigue and healing properties of nano-reinforced bituminous binders10.1016/j.ijfatigue.2015.05.008 ↗
35. Thermal and rheological properties of nanoparticle modified asphalt binder at low and intermediate temperature range10.1080/10916466.2016.1276589 ↗
36. Developments of nano materials and technologies on asphalt materials–a review10.1016/j.conbuildmat.2017.03.158 ↗
37. The effect of fly ash on the rheological properties of bituminous materials10.1016/j.fuel.2013.07.123 ↗
38. Predicting rutting performance of carbon nano tube (CNT) asphalt binders using regression models and neural networks10.1016/j.conbuildmat.2017.11.071 ↗
39. Investigating fatigue behavior of nanoclay and nano hydrated lime modified bitumen using LAS test10.1061/(ASCE)MT.1943-5533.0001376 ↗
40. Evaluating the effect of amorphous carbon powder on moisture susceptibility and mechanical resistance of asphalt mixtures10.1016/j.conbuildmat.2017.06.036 ↗
41. A project NCHRP 9-10 superpave protocols for modified asphalt binders
42. Fatigue performance evaluation of modified asphalt binder using of dissipated energy approach10.1016/j.conbuildmat.2017.01.010 ↗
43. Viscoelastic, fatigue resistance of asphalt binders modified with crumb rubber and styrene butadiene polymer10.1080/10916466.2016.1233246 ↗
44. Identifying fatigue failure in asphalt binder time sweep tests10.1016/j.conbuildmat.2016.06.020 ↗
45. Evaluation of fatigue properties of bituminous binders10.1007/BF02481683 ↗
46. Measuring and defining fatigue behavior of asphalt binders10.3141/1810-05 ↗
47. Evaluation of permanent deformation of unmodified and SBS modified asphalt mixtures using dynamic creep test10.1016/j.conbuildmat.2009.02.015 ↗
48. Rutting and moisture resistance evaluation of polyethylene wax–modified asphalt mixtures10.1080/10916466.2016.1212209 ↗
49. M. Witczak, C. Schwartz, and H. Von Quintus, NCHRP Project 9-19: Superpave support and performance models management, Interim Report, Federal Highway Administration, National Cooperative Highway Research Program, 2001.
50. Novel method for moisture susceptibility and rutting evaluation using Hamburg wheel tracking test10.3141/2446-01 ↗
51. Evaluation of AASHTO T 324 hamburg-wheel track device test10.1016/j.conbuildmat.2016.03.171 ↗
52. Y.H. Huang, Pavement analysis and design, 1993.
53. Effectiveness of Linear Amplitude Sweep (LAS) asphalt binder test in predicting asphalt mixtures fatigue performance10.1016/j.conbuildmat.2018.03.146 ↗
54. Improving thermo-rheological behavior and compatibility of SBR modified asphalt by addition of polyphosphoric acid (PPA)10.1016/j.conbuildmat.2017.02.065 ↗
55. The research for SBS and SBR compound modified asphalts with polyphosphoric acid and sulfur10.1016/j.conbuildmat.2013.03.001 ↗
56. Effect of SBR/NC on the rheological properties of bitumen and fatigue resistance of hot mix asphalt10.1061/(ASCE)MT.1943-5533.0001756 ↗
57. Laboratory evaluation of rutting performance of cold recycling asphalt mixtures containing SBS modified asphalt emulsion10.1080/10916466.2015.1135168 ↗
58. Comparison of rutting resistance of unmodified and SBS-modified Superpave mixtures by accelerated pavement testing10.1016/j.conbuildmat.2006.08.018 ↗