journal article·2019-05Open access

The role of powder content of the recycled aggregates of CDW in the behaviour of rendering mortars

Ruan L.S. Ferreira, Marcos A.S. Anjos, Andreza K.C. Nóbrega, Jéssyca E.S. Pereira, E.F. Ledesma

Abstract

In recent years, the number of studies on the incorporation of recycled aggregate (RA) into mortars has grown considerably. However, mixed recycled aggregate (MRA) is investigated on a much smaller scale due mainly to its high-water absorption capacity and higher powder content (<.150 mm). As a result, large volumes of this RA is stored in recycling plants, offering no alternatives that allow it to be used in construction, further aggravating the problems involved in the generation and destination of construction and demolition waste (CDW). This study evaluated the effects of this aggregate used with and without powder content on physical properties (fresh bulk density, incorporated air content, water retention, capillary absorption and porosity), mechanical properties (compressive strength, flexural strength, modulus of dynamic elasticity and adhesion to substrate) and the susceptibility of cracking of mortars. The natural aggregate (NA) was replaced by MRA at 25%, 50%, 75% and 100%. The mortars were mixed using a 1:1:6 volume ratio (cement: lime hydrated: aggregate). The results showed that the physical-mechanical behaviour of the mortars improved, as the content of MRA with higher powder content increased. On the other hand, higher percentages of NA replaced by MRA contributed to the excessive emergence of micro-cracks in the renderings. Finally, we have verified that the use of MRA of CDW for the production of rendering mortar is feasible, especially when there are aggregates with adequate granulometric composition and, preferably, free of powder.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycled Aggregate Concrete Performance · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. High tech startup creation for energy efficient built environment10.1016/j.rser.2016.12.088 ↗
2. Attitudes and perceptions of construction workforce on construction waste in Sri Lanka10.1108/14777830610639440 ↗
3. The global sociometabolic transition: Past and present metabolic profiles and their future trajectories10.1111/j.1530-9290.2008.00065.x ↗
4. A review of recycled aggregate in concrete applications (2000–2017)10.1016/j.conbuildmat.2018.03.240 ↗
5. ANEPAC, Mercado: Perspectivas para o Setor de Agregados, Assoc. Nac. Das Entidades Prod. Agreg. Para Construção. (2014) 6. http://www.anepac.org.br/agregados/mercado (accessed September 29, 2018).
6. Brasil, Sumário Mineral Brasileiro, Departamento Nacional de Produção Mineral, Brasília, 2016.
7. 2009
8. Physical e chemical and mineralogical characterization of fi ne aggregates from construction and demolition waste recycling plants10.1016/j.jclepro.2013.02.023 ↗
9. Effect of partial and total replacement of siliceous river sand with limestone crushed sand on the durability of mortars exposed to chemical solutions10.1016/j.conbuildmat.2013.05.037 ↗
10. Perfil ambiental qualitativo da extração de areia em cursos d’água10.1590/S0100-67622005000300011 ↗
11. C. Fischer, M. Werge, EU as a Recycling Society. Present recycling levels of Municipal Waste and Construction & Demolition Waste in the EU, 2009.
12. ABRELPE, Panorama dos resíduos sólidos no Brasil, ABRELPE, 2016.
13. Recycling of construction and demolition waste for producing new construction material (Brazil case-study)10.1016/j.conbuildmat.2016.07.044 ↗
14. Forecasting of construction and demolition waste in Brazil10.1177/0734242X16644680 ↗
15. Mechanical properties modeling of recycled aggregate concrete10.1016/j.conbuildmat.2009.10.011 ↗
16. Joint use of construction waste (CW) and sugarcane bagasse ash sand (SBAS) in concrete10.1016/j.conbuildmat.2016.03.062 ↗
17. Availability and processing of recycled aggregates within the construction and demolition supply chain: a review10.1016/j.jclepro.2016.12.070 ↗
18. M. Bravo, J. De Brito, Desempenho mecânico do concreto feito com agregados de construção e demolição, plantas de reciclagem de resíduos, 2015.
19. Physical, chemical and mineralogical properties of fine recycled aggregates made from concrete waste10.1016/j.conbuildmat.2015.03.112 ↗
20. CDW recycled aggregate renderings: Part II – Analysis of the effect of materials finer than 75 μm under accelerated aging performance10.1016/j.conbuildmat.2005.02.026 ↗
21. Estudo e avaliação de agregados reciclados de resíduo de construção e demolição para argamassas de assentamento e de revestimento10.1590/0366-69132018643702244 ↗
22. Durability of recycled aggregate concrete10.1016/j.conbuildmat.2012.11.106 ↗
23. The effect of superplasticizers on the mechanical performance of concrete made with fine recycled concrete aggregates10.1016/j.cemconcomp.2012.06.009 ↗
24. Performance estimation for concretes made with recycled aggregates of construction and demolition waste of some Brazilian cities10.1590/S1516-14392012005000119 ↗
25. Durability performance of concrete with recycled aggregates from construction and demolition waste plants10.1016/j.conbuildmat.2014.12.103 ↗
26. Mechanical performance of concrete made with aggregates from construction and demolition waste recycling plants10.1016/j.jclepro.2015.03.012 ↗
27. Influence of CDW recycled aggregate on drying shrinkage of mortar10.4236/ojce.2012.22009 ↗
28. Use of fine recycled aggregates from ceramic waste in masonry mortar manufacturing10.1016/j.conbuildmat.2012.11.036 ↗
29. Mortar made of recycled sand from C&D10.1016/j.proeng.2015.06.224 ↗
30. Performance of cementitious renderings and masonry mortars containing recycled aggregates from construction and demolition wastes10.1016/j.conbuildmat.2015.12.171 ↗
31. Properties and composition of recycled aggregates from construction and demolition waste suitable for concrete production10.1016/j.conbuildmat.2014.04.117 ↗
32. Influence of fine recycled concrete aggregates on the properties of mortars10.1016/j.conbuildmat.2015.02.037 ↗
33. Lightweight masonry mortars made with expanded clay and recycled aggregates10.1016/j.conbuildmat.2016.05.065 ↗
34. Quality control of recycled aggregates (RAs) from construction and demolition waste (CDW)
35. Study on the influence of attached mortar content on the properties of recycled concrete aggregate10.1016/j.conbuildmat.2008.04.012 ↗
36. Characterization of recycled aggregates construction and demolition waste for concrete production following the Spanish Structural Concrete Code EHE-0810.1016/j.conbuildmat.2010.07.012 ↗
37. Recycled Mortars with C&D Waste10.1016/j.prostr.2016.06.362 ↗
38. Influence of carbonated recycled concrete aggregate on properties of cement mortar10.1016/j.conbuildmat.2015.08.087 ↗
39. Removal of cement mortar remains from recycled aggregate using pre-soaking approaches10.1016/j.resconrec.2006.05.012 ↗
40. Influence of coating recycled aggregate surface with pozzolanic powder on properties of recycled aggregate concrete10.1016/j.conbuildmat.2008.07.019 ↗
41. Quality assessment for recycling aggregates from construction and demolition waste: an image-based approach for particle size estimation10.1016/j.wasman.2015.12.005 ↗
42. Environmentally-friendly bedding mortars for repair of historical buildings10.1016/j.conbuildmat.2012.04.131 ↗
43. A comparative analysis of the properties of recycled and natural aggregate in masonry mortars10.1016/j.conbuildmat.2013.08.049 ↗
44. Properties of cement-lime mortars vs. cement mortars containing recycled concrete aggregates10.1016/j.conbuildmat.2015.03.042 ↗
45. The role of aggregate characteristics on the performance optimization of high hydraulicity restoration mortars10.1016/j.conbuildmat.2017.07.134 ↗
46. Self-healing of lime based mortars: Microscopy observations on case studies
47. Effect of age and level of damage on the autogenous healing of lime mortars10.1016/j.compositesb.2017.05.041 ↗
48. Maximum feasible use of recycled sand from construction and demolition waste for eco-mortar production – Part-I: Ceramic masonry waste10.1016/j.jclepro.2014.10.084 ↗
49. Comparative study of three types of fine recycled aggregates from construction and demolition waste (CDW), and their use in masonry mortar fabrication10.1016/j.jclepro.2016.01.059 ↗
50. A new method to determine the density and water absorption of fine recycled aggregates10.1590/S1516-14392013005000074 ↗
51. Evaluation of mechanical properties and carbonation of mortars produced with construction and demolition waste10.1016/j.conbuildmat.2017.11.089 ↗
52. Incorporation of fine ceramics in mortars10.1016/j.conbuildmat.2007.10.014 ↗
53. Durability-related performance of concrete containing fine recycled aggregates from crushed bricks and sanitary ware10.1016/j.matdes.2015.11.023 ↗
54. Macroscopic and microstructural properties of engineered cementitious composites incorporating recycled concrete fines10.1016/j.cemconcomp.2016.12.013 ↗
55. Influence of pre-soaked recycled fine aggregate on the properties of masonry mortar10.1016/j.conbuildmat.2014.07.098 ↗
56. Influence of the ceramic recycled agreggates in the masonry mortars properties10.1016/j.conbuildmat.2016.12.021 ↗
57. A proposal for the maximum use of recycled concrete sand in masonry mortar design
58. Incorporation of fine sanitary ware aggregates in mortars
59. Using fine recycled concrete aggregate for mortar production10.1590/S1516-14392013005000164 ↗
60. A microbalance study of the effects of hydraulicity and sand grain size on carbonation of lime and cement10.1016/j.conbuildmat.2008.07.006 ↗
61. Potential of CO2sequestration through construction and demolition (C&D) waste–an overview10.1016/j.jcou.2017.05.014 ↗
62. Incorporation of fine concrete aggregates in mortars10.1016/j.conbuildmat.2012.06.031 ↗
63. Effects of internal curing on the strength, drying shrinkage and freeze – thaw resistance of concrete containing recycled concrete aggregates10.1016/j.conbuildmat.2015.05.045 ↗
64. Environmentally-friendly mortars: a way to improve bond between mortar and brick10.1007/BF02479505 ↗
65. Behaviour of cementitious mortars containing different kinds of recycled aggregate10.1016/j.conbuildmat.2007.12.006 ↗
66. Effect of powdered mixed recycled aggregates on bedding mortar properties10.1080/19648189.2016.1246689 ↗
67. CDW recycled aggregate renderings: Part I – Analysis of the effect of materials finer than 75μm on mortar properties10.1016/j.conbuildmat.2005.02.025 ↗