journal article·2019-10Open access

Effect of the curing type on the mechanical properties of lightweight concrete with polypropylene and steel fibres

Rahmat Madandoust, Mostafa Kazemi, Pouyan Khakpour Talebi, Jorge de Brito

Abstract

Abstract This study assessed the effect of steel and polypropylene fibres at various volume contents on concrete incorporating lightweight expanded clay aggregate (LECA) and water/binder (W/B) ratios of 0.37 and 0.42. The concrete specimens were cured under six curing conditions: wet, 3-day wet, 14-day wet, air-dry controlled, air-dry uncontrolled, and 90 °C vapour. The use of lightweight aggregates in the construction industry has drawn the attention of researchers and, on the other hand, fibres with a high strain-hardening response can be used as an appropriate addition in concrete materials. In this study, the mechanical properties of lightweight concrete containing steel or polypropylene fibres were evaluated by means of compressive strength, splitting tensile strength and modulus of elasticity tests at 3, 7, 28 and 60 days. According to the results, fibre reinforced concrete mixes containing LECA, cured under 90 °C vapour curing, achieved the highest mechanical strength. In addition, the optimum contents of steel fibres to obtain the highest compressive and splitting tensile strengths of lightweight concrete were 1% and 3%, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (79)

Show source-provided references
1. The greening of the concrete industry10.1016/j.cemconcomp.2008.12.010 ↗
2. Estimating the resilient modulus of crushed recycled pavement materials containing crumb rubber using Clegg impact value10.1016/j.resconrec.2018.10.042 ↗
3. Compressive strength assessment of recycled aggregate concrete using Schmidt rebound hammer and core testing10.1016/j.conbuildmat.2019.07.110 ↗
4. Mechanical characterization of concrete produced with recycled lightweight expanded clay aggregate concrete10.1016/j.jclepro.2014.11.015 ↗
5. Effect of crushed glass on behavior of crushed recycled pavement materials together with crumb rubber for making a clean green base and subbase10.1061/(ASCE)MT.1943-5533.0002765 ↗
6. Long-term behaviour of concrete produced with recycled lightweight expanded clay aggregate concrete10.1016/j.conbuildmat.2014.05.003 ↗
7. Durability of five years aged lightweight concretes containing rubber aggregates
8. Effect of fly ash on properties of self-compacting high strength lightweight concrete
9. Reducing variations in the test results of self-consolidating lightweight concrete by incorporating pozzolanic materials10.1016/j.conbuildmat.2018.01.121 ↗
10. Quality control of lightweight aggregate concrete based on initial and final water absorption tests
11. T.A. Holm, T.W. Bremner, State-of-the-art report on high-strength, high durability structural low-density concrete for applications in severe marine environments. Us Army Corps of Engineers, Washington, USA. Structural Laboratory, ERDC/SL TR-00-3, (2000).
12. Chandra · 2003
13. Properties of structural lightweight aggregate concrete
14. J.A. Bogas, Characterization of structural lightweight expanded clay aggregate concrete (PhD thesis in Civil Engineering). Technical University of Lisbon, Instituto Superior Tecnico, Lisbon, Portugal (in Portuguese), 2011.
15. Netweber. LECA [Online]. Available from: 〈http://www.netweber.co.uk/ fileadmin/user_upload/Literature/LECA___LWA_Brochure_LR-V1.pdf〉 (accessed 12 July 2015).
16. A comparison study of the fresh and hardened properties of normal weight and lightweight aggregate concretes10.1016/j.jobe.2017.11.025 ↗
17. Mechanical behaviour of concrete made with fine recycled concrete aggregates10.1016/j.cemconcomp.2006.12.004 ↗
18. Effects of internal curing on the strength, drying shrinkage and freeze-thaw resistance of concrete containing recycled concrete aggregates10.1016/j.conbuildmat.2015.05.045 ↗
19. Influence of the pre-saturation of recycled coarse concrete aggregates on the fresh and hardened properties of concrete10.1680/macr.2011.63.8.617 ↗
20. Use of plastic waste as aggregate in cement mortar and concrete preparation: a review10.1016/j.conbuildmat.2012.02.066 ↗
21. Preparation and characterization of expanded clay-paraffin wax-geo-polymer composite material10.3390/ma11112191 ↗
22. Preliminary research on the physical and mechanical properties of alternative lightweight aggregates produced by alkali-activation of waste powders10.3390/ma11071255 ↗
23. Durability of light weight expanded clay aggregate concrete10.1016/j.proeng.2013.09.002 ↗
24. Thermal and structural performance of geopolymer concrete containing phase change material encapsulated in expanded clay10.1016/j.enbuild.2019.03.005 ↗
25. Mindess · 2002
26. Extending internal curing to concrete mixtures with W/C higher than 0.4210.1016/j.conbuildmat.2010.09.031 ↗
27. Analytical study on tensile strength of concrete
28. Factor influencing point load tests on concrete10.1007/s42107-018-0074-8 ↗
29. Laboratory study of the effect of temperature on strength and stress-strain curve of limestabilized soil
30. Study of behavior of concrete under axial and triaxial compression
31. Numerical analysis of break-off test method on concrete10.1016/j.conbuildmat.2017.05.126 ↗
32. A three-dimensional numerical comparison of bearing capacity and settlement of tapered and under-reamed piles10.1080/19386362.2017.1336586 ↗
33. Effects of silica fume on mechanical strength and microstructure of basalt fiber reinforced cementitious composites (BFRCC)10.1016/j.conbuildmat.2017.11.159 ↗
34. Restrained shrinkage cracking of fiber-reinforced highstrength concrete10.3390/fib6010012 ↗
35. Analytical study on the behavior of corrosion damaged reinforced concrete beams strengthen with FRP
36. Shrinkage cracking of fiber reinforced concrete
37. Improvement of the resistance to concrete spalling by using a nylon fiber
38. Influence of steel fibres on strength and ductility of normal and lightweight high strength concrete10.1016/S0360-1323(01)00109-3 ↗
39. Aulia · 2002 · 43
40. Influence of polypropylene fiber geometry on plastic shrinkage cracking in concrete10.1016/j.cemconres.2006.01.010 ↗
41. Mechanical properties and durability of high strength concrete containing macro-polymeric and polypropylene fibers with nano-silica and silica fume10.1016/j.conbuildmat.2016.11.100 ↗
42. Research on compressive impact dynamic behavior and constitutive model of polypropylene fiber reinforced concrete10.1016/j.conbuildmat.2018.07.164 ↗
43. The effect of silica fume and steel fiber on the dynamic mechanical performance of high-strength concrete10.1016/S0008-8846(98)00235-X ↗
44. Performance of steel fiber reinforced concrete
45. Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers10.1016/j.conbuildmat.2015.06.051 ↗
46. Flexural behavior of geopolymer composites reinforced with steel and polypropylene macro fibers10.1016/j.cemconcomp.2016.11.014 ↗
47. Effect of steel fiber on the mechanical properties of oil palm shell lightweight concrete10.1016/j.matdes.2011.02.055 ↗
48. Mechanical Properties of structural lightweight aggregate concrete containing low volume steel fiber10.1007/s13369-014-1023-9 ↗
49. Investigation of the mechanical properties of lightweight concrete containing LECA with metakaoline pozzolan using polypropylene and steel fibers
50. Effects of saturation degrees, freezing thawing, and curing on geotechnical properties of lime and lime-cement concretes10.1016/j.coldregions.2019.02.011 ↗
51. Experimental study of the effects of curing time on geotechnical properties of stabilized clay with lime and geogrid10.1080/19386362.2017.1329259 ↗
52. Effect of curing age on the self-monitoring behavior of carbon fiber reinforced mortar10.1016/S0008-8846(97)00118-X ↗
53. An investigation on the fresh and hardened properties of self-compacting concrete incorporating magnetic water with various pozzolanic materials10.1016/j.conbuildmat.2017.09.135 ↗
54. Effects of pre-soaked super absorbent polymers on fresh and hardened properties of self-consolidating lightweight concrete10.1016/j.conbuildmat.2016.03.010 ↗
55. Ternary blended cement: an eco-friendly alternative to improve resistivity of high-performance self-consolidating concrete against elevated temperature10.1016/j.jclepro.2019.03.054 ↗
56. Durability, physical and mechanical properties of fiber-reinforced 400 concretes at low-volume fraction10.1016/j.conbuildmat.2014.09.058 ↗
57. Influence of curing conditions on properties of normal and high strength concrete with and without pre-wetted lightweight aggregates10.3151/jact.15.300 ↗
58. ACI 318 · 1999
59. ASTM C33 · 2011
60. Effect of SnO2, ZrO2, and CaCO3 nanoparticles on water transport and durability properties of self-compacting mortar containing fly ash: experimental observations and ANFIS predictions10.1016/j.conbuildmat.2017.10.067 ↗
61. Microstructure and durability properties of cement mortars containing nano-TiO2 and rice husk ash10.1016/j.conbuildmat.2016.03.136 ↗
62. Enhancing workability retention of concrete containing natural zeolite by superplasticizers’ combination
63. Ductile behavior of high-performance fiber reinforced cementitious composite (HPFRCC) frames10.1016/j.conbuildmat.2016.04.078 ↗
64. ASTM C39 · 2011
65. ASTM C496 · 2004
66. ASTM C469 · 2002
67. NF EN 12390-13 AFNOR, Testing hardened concrete, in: Determination of secant modulus of elasticity in compression, (2013) 18–455.
68. Effect of curing, capillary action, and groundwater level increment on geotechnical properties of lime concrete: experimental and prediction studies10.1016/j.jrmge.2017.01.004 ↗
69. Laboratory study of the effect of degrees of saturation on lime concrete resistance due to the groundwater level increment10.1007/s10706-017-0335-4 ↗
70. Jahandari · 2015
71. Effects of simultaneous utilization of natural zeolite and magnetic water on engineering properties of self-compacting concrete10.1007/s42107-018-00106-w ↗
72. Properties of fiber reinforced concrete: workability, behavior under long-term loading, air-void characteristics
73. Radiation chemistry of water vapor; indirect effect on deuterium and exchange of D-atoms with water molecules10.1021/ja01578a002 ↗
74. The effect of polypropylene fibers on the properties of fresh and hardened lightweight selfcompacting concrete10.1016/j.conbuildmat.2010.06.018 ↗
75. Mechanical properties of date palm fibres and concrete reinforced with date palm fibres in hot-dry climate10.1016/j.cemconcomp.2004.09.015 ↗
76. A review of the hardened mechanical properties of self-compacting concrete10.1016/j.cemconcomp.2006.07.010 ↗
77. Madandoust · 1990
78. FIP manual of lightweight aggregate concrete. Surry University Press, Glasgow and London, 1983.
79. Relationship between compressive strength and modulus of elasticity of high-strength concrete