journal article·2020-02

Laboratory assessment of porous asphalt mixtures reinforced with synthetic fibers

Carlos J. Slebi-Acevedo, Pedro Lastra-González, Irune Indacoechea-Vega, Daniel Castro-Fresno

Publisher page

Abstract

Porous asphalt (PA) mixtures have become a new alternative in the development of new road pavement surface layers given their multiple advantages such as surface runoff improvement, the decrease of the urban heat island effect, the reduction of road traffic noise and the minimization of the spray and aquaplaning effect leading to a safer driving. However, the durability of these mixtures is not as good as for dense graded mixtures. This research studies the effectiveness of adding a blend of polyolefin/aramid fibers and homopolymer polyacrylonitrile fibers in PA mixtures in terms of functionality and mechanical performance. Furthermore, changes in the filler content are assessed. The experimental testing plan includes air voids characterization, permeability, moisture sensitivity and particle loss in dry and wet conditions. Improvements in the mechanical performance can be observed in dry conditions. Finally, the fracture energy, postcracking energy and toughness are also analyzed. The results show that the addition of fibers brings ductility to the PA mixture improving toughness while maintaining functionality since the air void content remains over 20%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Asphalt Pavement Performance Evaluation · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Stormwater quality benefits of a porous friction course and its effect on pollutant removal by roadside shoulders10.2175/106143005X82217 ↗
2. Study of the porous asphalt performance with cellulosic fibres10.1016/j.conbuildmat.2016.12.222 ↗
3. Characterization of OGFC mixtures containing reclaimed polyethylene fibers10.1061/(ASCE)MT.1943-5533.0000162 ↗
4. Contribution of cellulose fibers to the performance of porous asphalts
5. Clifford · 1996
6. H. Rondón, F. Reyes, Pavimentos, materiales construcción y diseño, Ecoe-edici, Bogotá - Colombia, n.d.
7. J.F. Adam, A.C. Brooker, S.H. Carpenter, A.D. John, G. Huber, D.C. Jackson, P.E. Krugler, D. Lee, R.S. Mcdaniel, D.B. Mellott, J.S. Moulthrop, S. Shuler, M. Stroup-gardiner, K.K. Tam, Open-graded friction course: state of the practice. Transportation Research Circular E-C005, Transp. Res. Circ. E-C005. (1998) 20.
8. Influence of aggregate gradation on the performance properties of porous asphalt mixtures10.1061/(ASCE)MT.1943-5533.0000602 ↗
9. H.A. Smith, Performance Characteristics of Open-Graded Friction Courses, in: NCHRP Synthesis of Highway Practice 180, TRB, Natl. Res. Counc. Washington, D.C. (1992).
10. Investigation of pavement raveling performance using smartphone10.1016/j.ijprt.2017.11.007 ↗
11. Ravelling investigation of porous asphalt concrete based on fatigue characteristics of bitumen-stone adhesion and mortar10.1016/j.matdes.2008.04.031 ↗
12. F. Moreno-navarro, G. García-travé, M.D.E.L.C. Rubio-gámez, M.J. Martinez-echevarria, comparison of two laboratory test methods analysis of the moisture susceptibility of hot bituminous mixes based on the comparison of two laboratory test methods, (2014). doi: 10.15446/dyna.v81n183.30893.10.15446/dyna.v81n183.30893 ↗
13. Asphalt Through Various Mechanical
14. K.K.S. Mathavan, M.M. Rahman, M. Stonecliffe-Jones, Pavement raveling detection and measurement from synchronized intensity and range images, J. Transp. Res. Board. 2457 (n.d.) 3–11. doi:doi.org/10.3141/2457-01.10.3141/2457-01 ↗
15. Mechanical performance of fibers in hot mix asphalt: a review10.1016/j.conbuildmat.2018.12.171 ↗
16. Exploratory study of porous asphalt mixtures with additions of reclaimed tetra pak material10.1016/j.conbuildmat.2017.11.067 ↗
17. A review of mix design and evaluation research for permeable friction course mixtures10.1016/j.conbuildmat.2010.09.038 ↗
18. Fatigue cracking resistance of fiber-reinforced asphalt concrete10.1177/004051750507500206 ↗
19. Performance characteristics of fiber modified hot mix asphalt10.1016/j.conbuildmat.2018.04.221 ↗
20. Performance of fiber reinforced asphalt concrete under environmental temperature and water effects10.1016/j.conbuildmat.2010.03.012 ↗
21. Fibers from recycled tire as reinforcement in hot mix
22. Performance of porous asphalt mixture with various additives10.1080/10298436.2016.1175560 ↗
23. Reduction in the use of mineral aggregate by recycling cellulose ashes to decrease the aging of hot asphalt mixtures10.1016/j.conbuildmat.2017.03.154 ↗
24. Cellulosic fiber reinforced cement-based composites: a review of recent research10.1016/j.conbuildmat.2015.01.035 ↗
25. A review of recent research on the use of cellulosic fibres, their fibre fabric reinforced cementitious, geo-polymer and polymer composites in civil engineering10.1016/j.compositesb.2016.02.002 ↗
26. de prescripciones técnicas generales para obras de carreteras y puentes. Art. 542. Mezclas bituminosas tipo hormigón
27. The influence of natural and synthetic fibers on low temperature mixed mode I + II fracture behavior of warm mix asphalt (WMA) materials10.1016/j.engfracmech.2017.06.003 ↗
28. Laboratory evaluation of stabilizing methods for porous asphalt mixtures10.1016/j.conbuildmat.2013.08.076 ↗
29. A comparative study on properties of porous friction course mixes with neat bitumen and modified binders10.1016/j.conbuildmat.2008.08.008 ↗
30. Procedure for the evaluation of asphalt binders ageing in contact with aggregates and application of this procedure to analyze the influence of the aggregate type on binder ageing10.1080/14680629.2001.9689895 ↗
31. Calzada-Perez · 1984
32. Analysis and evaluation of the performance of porous asphalt. The Spanish experience
33. Cracking resistance of fiber reinforced asphalt concrete at −20 °C10.1016/j.conbuildmat.2015.02.005 ↗
34. Effects of different reactive MgOs on the hydration of MgO-activated GGBS paste
35. A. Alvarez, A. Epps Martin, C. Estakhri, J. Button, C. Glover, S. Jung, Synthesis of current practice on the design, construction, and maintenance of porous friction courses., 2006.
36. ASTM D7064-04, Standard practice for open-graded friction course (OGFC) mix design, n.d.
37. A complete laboratory assessment of crumb rubber porous asphalt10.1016/j.conbuildmat.2016.12.016 ↗
38. Hejazi · 2008
39. Performance of porous asphalt mixture with various additives
40. Zhou · 2017 · 549
41. Mechanism and behavior of bitumen strength reinforcement using fibers10.1007/s10853-005-5691-4 ↗
42. Experimental study of fibers in stabilizing and reinforcing asphalt binder10.1016/j.fuel.2009.08.020 ↗