Fracture properties and response surface methodology model of alkali-slag concrete under freeze–thaw cycles
Source abstract
Abstract
Alkali-slag concrete (ASC) is prepared with Na2SiO3 and NaOH composite activator. Fracture properties of ASC under freeze–thaw cycles are studied using response surface methodology (RSM), Design Expert software and Box–Behnken design (BBD). The RSM model of fracture toughness is built, then the influence law of sol ratio, slag content, age on fracture toughness is put forward. The relationship between initiation fracture toughness (KICQ) and unstable fracture toughness (KICS) is established. The influence law of freeze–thaw, sol ratio and slag content on KICS is built, and the impact mechanism of the two factors on KICS is analyzed. Results show that the RSM model fits well and can be used to analyze and predict ASC fracture toughness. The influential significance rank for KICS is slag content > age > sol ratio, and the most significant interaction is between slag content and age. KICQ is about 50–70% of KICS, crack initiation should be the warning indicator of ASC structure. Fracture toughness decreases with the increased freeze–thaw times, whose declining rate and degree increase with sol ratio and slag content. With sol ratio increasing, more intense is the alkali slag reaction, reducing density and hindering depolymerization. With more cementitious material content, effective water–cement ratio is relatively decreased, subsequent hydration is limited, some slag powder does not participate in the reaction, reducing ASC toughness.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. New cements for the 21st century: the pursuit of an alternative to Portland cement10.1016/j.cemconres.2011.03.016 ↗
2. An electrical impedance investigation into the chloride ion transport resistance of alkali silicate powder activated slag concretes10.1016/j.cemconcomp.2013.06.002 ↗
3. Effect of aggregate size on spalling of geopolymer and Portland cement concretes subjected to elevated temperatures10.1016/j.conbuildmat.2012.04.120 ↗
4. Investigating direct tensile behavior of high performance fiber reinforced cementitious composites at high strain rates10.1016/j.cemconres.2013.03.018 ↗
5. X-ray microtomography shows pore structure and tortuosity in alkali-activated binders10.1016/j.cemconres.2012.03.004 ↗
6. Engineering and durability properties of concret- es based on alkali-activated granulated blast furnace slag/metakaolin blends10.1016/j.conbuildmat.2012.01.017 ↗
7. The influence of coarse aggregate size and volume on the fracture behavior and brittleness of self-compacting concrete10.1016/j.cemconres.2014.06.008 ↗
8. Use of CaO as an activator for producing a price-competitive non-cement structural binder using ground granulated blast furnace slag10.1016/j.cemconres.2013.09.011 ↗
9. Caijun · 2006
10. Freeze–thaw resistance of alkali–slag concrete based on response surface methodology10.1016/j.conbuildmat.2013.07.045 ↗
11. Experimental study of the material and bond properties of frost-damaged concrete10.1016/j.cemconres.2010.11.007 ↗
12. Determination of size-independent specific fracture energy of concrete mixes by the tri-linear model10.1016/j.cemconres.2013.03.010 ↗
13. Durability of alkali-activated binders: a clear advantage over Portland cement or an unproven issue?10.1016/j.conbuildmat.2011.12.017 ↗
14. Durability of green high performance alkali-activated slag pavement concrete
15. Very early-age reaction kinetics and microstructural development in alkali-activated slag10.1016/j.cemconcomp.2014.09.001 ↗
16. Freeze–thaw cycle test and damage mechanics models of alkali-activated slag concrete10.1016/j.conbuildmat.2010.12.006 ↗
17. A simplified method for determining double-K fracture parameters for three-point testsl10.1023/A:1007676716549 ↗
18. Direct tension test and tensile strain capacity of concrete at early age10.1016/S0008-8846(03)00231-X ↗
19. Practical analytical method of concrete double-K fracture parameters
20. Box–Behnken design based statistical modeling for ultrasound-assisted extraction of corn silk polysaccharide10.1016/j.carbpol.2012.09.020 ↗
21. Response surface modeling of Pb(II) removal from aqueous solution by Pistacia vera L.: Box–Behnken experimental design10.1016/j.jhazmat.2009.06.035 ↗
22. Statistical optimization of alkaline protease production from penicillium citrinum YL-1 under solid-state fermentation10.1080/10826068.2014.923450 ↗
23. Ultrasonic-assisted extraction optimized by response surface methodology, chemical composition and antioxidant activity of polysaccharides from Tremella mesenterica10.1016/j.carbpol.2010.07.045 ↗