journal article·2012-02

Heat of hydration of blended cement containing treated ground palm oil fuel ash

Chea Chandara, Khairun Azizi Mohd Azizli, Zainal Arifin Ahmad, Syed Fuad Saiyid Hashim, Etsuo Sakai

Publisher page

Abstract

Abstract The aim of this paper is to study the heat of hydration of blended cement containing ground palm oil fuel ash and treated ground palm oil fuel ash (without unburned carbon), with and without superplasticizer (SP). The palm oil fuel ash (POFA) was ground in a ball mill to produce ground POFA (GPOFA). Unburned carbon, which is a major part of unburned residue in GPOFA, was removed by heat treatment at 500 °C for 1 h, producing treated GPOFA (TGPOFA). This result shows that the total heat of hydration of blended cement pastes containing GPOFA and TGPOFA are lower than OPC paste, proving that GPOFA and TGPOFA are good pozzolanic materials which can be used in massive concrete for preventing volume change and micro-cracks (caused by thermal stresses). Also, GPOFA and TGPOFA have low pozzolanic reactivity at the early hydration. However, TGPOFA has better pozzolanic reactivity than GPOFA due to its higher content of glassy phases. The hydration peak is retarded when SP is added into cement paste, but the total heat of hydration at the age of 7 days is no different even with the addition of SP.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Malaysian Palm Oil Board (MPOB). Economic and statistic; 2010 http://econ.mpob.gov.my/economy/Overview_2009.pdf [accessed 11. 08. 2010].
2. Utilization of palm oil fuel ash in high-strength concrete10.1061/(ASCE)0899-1561(2004)16:6(623) ↗
3. Ash from oil palm waste as concrete materials10.1061/(ASCE)0899-1561(1990)2:2(94) ↗
4. Use of waste ash from palm oil industry in concrete10.1016/j.wasman.2005.12.014 ↗
5. Strength and water permeability of concrete containing palm oil fuel ash and rice husk–bark ash10.1016/j.conbuildmat.2006.06.015 ↗
6. Resistance to chloride penetration of blended Portland cement mortar containing palm oil fuel ash, rice husk ash and fly ash10.1016/j.conbuildmat.2006.12.001 ↗
7. Strength and chloride resistance of blended Portland cement mortar containing palm oil fuel ash and fly ash10.1016/S1674-4799(09)60083-2 ↗
8. The effect of unburned carbon in palm oil fuel ash on fluidity of cement pastes containing superplasticizer10.1016/j.conbuildmat.2010.02.036 ↗
9. Analysis of mineralogical component of palm oil fuel ash with or without unburned carbon10.4028/www.scientific.net/AMR.173.7 ↗
10. Investigation of blended cement hydration by isothermal calorimetry and thermal analysis10.1016/j.cemconres.2004.10.027 ↗
11. Pozzolanic reaction of a spent fluid catalytic cracking catalyst in FCC-cement mortars10.1007/s10973-006-7921-7 ↗
12. Hydration and temperature development of concrete made with blast-furnace slag cement10.1016/S0008-8846(98)00229-4 ↗
13. Heat of hydration of high reactive pozzolans in blended cements: isothermal conduction calorimetry10.1016/j.tca.2005.05.014 ↗
14. Compressive strength and heat evolution of concretes containing palm oil fuel ash10.1061/(ASCE)MT.1943-5533.0000104 ↗
15. Influence of superplasticizers on the hydration of cement and the pore structure of hardened cement10.1016/j.cemconres.2006.08.003 ↗