Investigation on the corrosion resistance of bagasse-rice husk-wood ash blended cement concrete by impressed voltage
Source abstract
Abstract
Abstract In this study, the compressive strength, the durability to chloride penetration and the corrosion of concrete containing bagasse-rice husk-wood ash (BRWA) were tested. Normal strength concrete with water to binder ratio (w/b) of 0.45 and 0.60 were used. The Portland cement was partially replaced with BRWA at the dosage of 10% and 20% by weight of binder. For concrete with w/b of 0.60, the replacement level of 40% was also tested. The chloride penetration resistance of the concretes was evaluated using the measurement of non-steady state chloride diffusion coefficient by accelerated salt ponding. The accelerated corrosion test by impressed voltage (ACTIV) was also performed to verify the findings and to investigate the characteristics of corrosion in terms of the initial current, the time of initial crack, and the weight loss of embedded steel. From the experiment, it was found that the concrete with 20% BRWA had the highest gain of compressive strength at the ages ranging from 7 to 180 days. The results of the experiments of accelerated salt ponding were in good agreement and conformed with ACTIV. The increase of the incorporation of the BRWA reduced the chloride penetration. The diffusion coefficient was reduced by 30–40% and 65–70% for concrete containing 10% BRWA and 20% BRWA compared to control concrete. The results of ACTIV also indicated that the initial current and the weight loss of embedded steel reduced and the time of initial crack increased with the increase in the replacement level of BRWA.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Neville AM. Properties of concrete. John Wiley & Sons, Harlow, London; 2003.
2. Agricultural information center. Fundamental data of agricultural economics. Office of agricultural economics, Ministry of agriculture and cooperatives, Bangkok, Thailand, ISBN 978-974-403-523-3; 2008. [in Thai].
3. Properties of blended cements made from rice husk ash
4. Rice husk ash as an alternative source for active silica production10.1016/S0167-577X(02)00879-0 ↗
5. Sulfate resistance of blended cements containing fly ash and rice husk ash10.1016/j.conbuildmat.2005.10.005 ↗
6. Rice husk ash blended cement: assessment of optimal level of replacement for strength and permeability properties of concrete10.1016/j.conbuildmat.2007.06.011 ↗
7. Mehta PK. Role of flyash in sustainable development. Concrete, flyash and the environment proceedings, Francisco, CA; December 8, 1988; p. 13–25.
8. Evaluation of bagasse ash as supplementary cementitious material10.1016/j.cemconcomp.2007.03.001 ↗
9. Pozzolanic activity and filler effect of sugar cane bagasse ash in Portland cement and lime mortars10.1016/j.cemconcomp.2008.01.001 ↗
10. Ultrafine grinding of sugar cane bagasse ash for application as pozzolanic admixture in concrete10.1016/j.cemconres.2008.11.005 ↗
11. Evaluation of AgNO3 solution spray method for measurement of chloride penetration into hardened cementitious matrix materials
12. Rapid determination of the chloride diffusivity in concrete by applying an electrical field
13. NT BUILD 492. Chloride migration coefficient from non-steady-state migration experiments. Nordtest, Espoo, Finland; 1999.
14. NT BUILD 356. Concrete, repairing materials and protective coating: embedded steel method, chloride permeability, Nordtest, Espoo, Finland; 1989.
15. Performance of rice husk ash produced using a new technology as a mineral admixture in concrete10.1016/S0008-8846(03)00038-3 ↗
16. Concrete with high active rice husk ash10.1007/BF02835067 ↗
17. Rice-husk ash paste and concrete: Some aspects of hydration and the microstructure of the interfacial zone between the aggregate and paste10.1016/0008-8846(96)00061-0 ↗
18. The influence of different curing conditions on the pore structure and related properties of fly ash cement pastes and mortars10.1016/S0950-0618(97)00061-5 ↗
19. Effect of fly ash fineness on compressive strength and pore size of blended cement paste10.1016/j.cemconcomp.2004.07.003 ↗
20. Strength, porosity and corrosion resistance of ternary blend Portland cement, rice husk ash and fly ash mortar10.1016/j.conbuildmat.2007.06.010 ↗
21. Compressive strength, chloride diffusivity and pore structure of high performance metakaolin and silica fume concrete10.1016/j.conbuildmat.2005.07.001 ↗
22. Increase of bond strength at interfacial transition zone by the use of fly ash10.1016/S0008-8846(99)00241-0 ↗
23. Effects of fly ash and silica fume on interfacial porosity of concrete10.1061/(ASCE)0899-1561(1999)11:3(197) ↗
24. Influence of the use of rice husk ash on the electrical resistivity of concrete: a technical and economic feasibility study10.1016/j.conbuildmat.2009.06.039 ↗
25. Effect of grinding on chemical and physical properties of rice husk ash10.1016/S1674-4799(09)60041-8 ↗