Laboratory study on the low temperature physical hardening of conventional and polymer modified bitumens
Source abstract
Abstract
Abstract Physical hardening is a reversible process that may influence the long-term performance of a material. In this paper, physical hardening of five unmodified and 35 polymer modified bitumens was studied using a bending beam rheometer (BBR). The modified binders were prepared by mixing 3, 6 or 9% styrene–butadiene–styrene (SBS), styrene–ethylene–butylene–styrene (SEBS), ethylene vinyl acetate (EVA) or ethylene butyl acrylate (EBA) polymers with different base bitumens. The binders were isothermally stored at low temperatures (−15, −25 and −35°C) for different times ranging from 0.5 to 32 h. The results indicated that physical hardening significantly influenced the creep response of the binders, and the hardening index and horizontal shift factor were strong functions of isothermal storage temperature. Unlike the shift factor, the hardening index did not always increase with decreasing storage temperature. At a given storage temperature, a statistical correlation was observed between the two parameters. It was also shown that degree and kinetics of physical hardening were dependent on the base bitumens, and in most cases, the effect of polymer modification was insignificant.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Petroleum Processing and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Struik · 1978
2. Anderson · 1994
3. Physical hardening of asphalt binders relative to their glass transition temperatures
4. Chemical composition of asphalt as related to asphalt durability: state of the art
5. Glass transition behaviour and physical hardening of asphalt binders
6. The colloidal nature of asphalt as shown by its flow properties10.1021/j150378a005 ↗
7. Development of internal structure in asphalts with time
8. Steric hardening of asphalts
9. Compatibility and storage stability of styrene-butadiene-styrene copolymer modified bitumens10.1007/BF02486904 ↗
10. Characterization of styrene-butadiene-styrene polymer modified bitumens — comparison of conventional methods and dynamic mechanical analyses10.1520/JTE11874J ↗
11. Collyer · 1998
12. Physical aging of polymers10.1016/0079-6700(94)00001-I ↗