Effects of particle characteristics of lightweight aggregate on mechanical properties of lightweight aggregate concrete
Source abstract
Abstract
Abstract Particle characteristics of lightweight aggregates (LWAs) have great influences on the mechanical performance of the corresponding concrete. In this research, particle characteristics of LWAs were measured through digital image processing (DIP), including particle sizes, gradation and shape properties, and the effects of LWA particle characteristics on mechanical performances of lightweight aggregate concrete (LWAC) were investigated through grey correlation analysis methods. The LWAC interfacial roughness was investigated with fractal theory, and the effects of LWA particle characteristics on the LWAC interfacial roughness were also investigated through grey correlation analysis methods. The results show that LWAC interfacial fractal dimension and mechanical performance exhibit good linear correlation. LWA particle specific surface area and LWA particle aspect ratio take greater effects on LWAC mechanical strength and interfacial roughness. LWAC mechanical strength would be greater when LWA specific surface area (SV) was within 586.4–633.7 m2/m3 and LWA aspect ratio was within 1.3262–1.3308. LWAC interfacial fractal dimension (D) would be greater when LWA specific surface area (SV) was within 539.1–633.7 m2/m3 and LWA aspect ratio was within 1.3262–1.3354. It is proposed that the change of the contact area between LWA particles and mortar phases will change the occlusal structures on the LWAC interface, which consequently changes the interfacial roughness, the interfacial bond strength and hence the LWAC mechanical strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete Properties and Behavior · Infrastructure Maintenance and Monitoring
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Analytical model for compressive strength, elastic modulus and peak strain of structural lightweight aggregate concrete10.1016/j.conbuildmat.2012.06.034 ↗
2. Evaluation of aggregate gradation in lightweight concrete via image processing10.1016/j.conbuildmat.2011.08.081 ↗
3. The effects of aggregate properties on lightweight concrete10.1016/j.buildenv.2005.06.031 ↗
4. Influence of volume fraction and characteristics of lightweight aggregates on the mechanical properties of concrete10.1016/j.conbuildmat.2009.02.038 ↗
5. Evaluation of the anisotropy of the void distribution and the stiffness of lightweight aggregates using CT imaging10.1016/j.conbuildmat.2013.07.082 ↗
6. Evaluation of image analysis techniques for quantifying aggregate shape characteristics10.1016/j.conbuildmat.2006.03.005 ↗
7. Interfacial interactions in lightweight aggregate concretes and their influence on the concrete strength10.1016/0958-9465(96)00002-9 ↗
8. X-ray computed tomography of aggregates and asphalt mixes
9. ASTM D4791, Standard test method for flat and elongated particles in coarse aggregate, Annual Book of ASTM Standard, vol. 04.03, West Conshohocken, Pa.
10. Image processing applied to the analysis of segregation in lightweight aggregate concretes10.1016/j.conbuildmat.2011.03.028 ↗
11. Evaluation of different digital image processing software for aggregates and hot mix asphalt characterizations10.1016/j.conbuildmat.2012.07.051 ↗
12. Particle shape analysis of coarse aggregate using digital image processing10.1016/S0008-8846(99)00105-2 ↗
13. The surface fractal dimension of the soil-pore interface as measured by image analysis10.1016/S0016-7061(01)00077-5 ↗
14. Fractal dimension – a measure of fracture roughness and toughness of concrete10.1016/S0013-7944(02)00019-X ↗
15. Barnsley · 1988
16. Feature selection using correlation fractal dimension: issues and applications in binary classification problems10.1016/j.asoc.2007.03.007 ↗
17. GB/T 17431.2-1998. Lightweight aggregates and its test methods-Part 2: Test method for lightweight aggregates, China National Standard; 1998.
18. ASTM C128–04a. Standard test method for density, relative density (specific gravity) and absorption of fine aggregate. West Conshohocken, PA: ASTM International; 2006.
19. Compressive behavior and failure modes of structural lightweight aggregate concrete – characterization and strength prediction10.1016/j.matdes.2012.11.004 ↗
20. ASTM C143/C 143M–05a. Standard test method for slump of hydraulic-cement concrete. West Conshohocken, PA: ASTM International; 2006.
21. Influence of steel slag on mechanical properties and durability of concrete10.1016/j.conbuildmat.2013.06.044 ↗
22. Picture thresholding using an iterative selection method10.1109/TSMC.1978.4310039 ↗
23. Gonzalez · 1993
24. Characterisation of micro-structural damage in asphalt mixtures using image analysis10.1016/j.conbuildmat.2013.12.047 ↗
25. Assessment of optimum threshold and particle shape parameter for the image analysis of aggregate size distribution of concrete section10.1016/j.optlaseng.2013.08.020 ↗
26. Estimation of fractal dimension of images using a fixed mass approach10.1016/S0167-8655(99)00004-5 ↗
27. Grey correlation analysis between strength of slag cement and particle fraction of slag powder10.1016/j.cemconcomp.2007.02.004 ↗
28. Grey correlation analysis and regression estimation of mining subsidence in Yu-Shen-Fu mining area10.1016/j.proenv.2011.09.274 ↗
29. Effect of content and particle size distribution of coarse aggregate on the compressive strength of concrete10.1016/j.conbuildmat.2009.10.009 ↗
30. Interdependence of microstructure and strength of structural lightweight aggregate concrete10.1016/0958-9465(92)90022-N ↗
31. Microstructure of the interfacial zone between lightweight aggregate and cement paste10.1016/0008-8846(90)90103-5 ↗
32. Water absorption, permeability, and resistance to chloride-ion penetration of lightweight aggregate concrete10.1016/j.conbuildmat.2010.06.020 ↗
33. Design considerations for reinforced lightweight concrete10.1016/0262-5075(81)90031-2 ↗
34. Index of aggregate particle shape and texture of coarse aggregate as a parameter for concrete mix proportioning10.1016/j.cemconres.2004.03.010 ↗
35. A study of the fresh properties of controlled low-strength rubber lightweight aggregate concrete (CLSRLC)10.1016/j.conbuildmat.2012.11.113 ↗
36. Effect of aggregate type on properties of hardened self-consolidating lightweight concrete (SCLC)10.1016/j.conbuildmat.2009.12.007 ↗
37. The influence of the initial moisture content of lightweight aggregate on internal curing10.1016/j.conbuildmat.2012.02.074 ↗