Modeling mechanical performance of lightweight concrete containing silica fume exposed to high temperature using genetic programming
Source abstract
Abstract
Abstract In this study, the mechanical performance of lightweight concrete exposed to high temperature has been modeled using genetic programming. The mixes incorporating 0%, 10%, 20% and 30% silica fumes were prepared. Two different cement contents (400 and 500 kg/m 3 ) were used in this study. After being heated to temperatures of 20 °C, 200 °C, 400 °C and 800 °C, respectively, the compressive and splitting tensile strength of lightweight concrete was tested. Empirical genetic programming based equations for compressive and splitting tensile strength were obtained in terms of temperature ( T ), cement content ( C ), silica fume content (SF), pumice aggregate content ( A ), water/cement ratio ( W / C ) and super plasticizer content ( SP ). Proposed genetic programming based equations are observed to be quite accurate as compared to experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire effects on concrete materials · Concrete and Cement Materials Research · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. An investigation on the use of shredded waste PET bottles as aggregate in lightweight concrete10.1016/j.wasman.2009.09.033 ↗
2. High-strength lightweight concrete made with scoria aggregate containing mineral admixtures10.1016/S0008-8846(03)00131-5 ↗
3. Semi-lightweight concretes produced by volcanic slags10.1016/S0008-8846(96)00190-1 ↗
4. Effect of initial curing on early strength and physical properties of lightweight concrete10.1016/S0008-8846(98)00051-9 ↗
5. Fly ash lightweight aggregates in high performance concrete10.1016/j.conbuildmat.2007.09.001 ↗
6. Effects of expanded perlite aggregate and mineral admixtures on the compressive strength of low-density concretes10.1016/S0008-8846(01)00615-9 ↗
7. Performance of ground blast furnace slag and ground basaltic pumice concrete against seawater attack10.1016/j.conbuildmat.2007.03.024 ↗
8. Influence of silica fume addition on concretes physical properties and on corrosion behaviour of reinforcement bars10.1016/S0958-9465(02)00120-8 ↗
9. Estimation of the permeability of silica fume cement concrete10.1016/j.conbuildmat.2009.08.033 ↗
10. Shah · 1994
11. Thermo-mechanic model for concrete exposed to elevated temperatures10.1016/S0141-0296(02)00209-2 ↗
12. An experimental investigation for bond and compressive strength of concrete with mineral admixtures at high temperature
13. Performance of metakaolin concrete at elevated temperatures10.1016/S0958-9465(01)00061-0 ↗
14. Phan · 1996
15. Genetic programming based formulation for fresh and hardened properties of self-compacting concrete containing pulverised fuel ash10.1016/j.conbuildmat.2009.02.012 ↗
16. Modelling the performance of self-compacting SIFCON of cement slurries using genetic programming technique10.12989/cac.2008.5.5.475 ↗
17. BASF Chemical Company. RHEOBUILD® 1000. .
18. Effect of exposure time and rates of heating and cooling on residual strength of heated concrete10.1680/macr.1986.38.136.151 ↗
19. Performance of lightweight concrete with silica fume after high temperature10.1016/j.conbuildmat.2007.07.017 ↗
20. The effect of high temperature on compressive strength and splitting tensile strength of structural lightweight concrete containing fly ash10.1016/j.conbuildmat.2007.07.033 ↗
21. Residual strength and pore structure of high-strength concrete and normal-strength concrete after exposure to high temperatures10.1016/S0958-9465(98)00034-1 ↗
22. High strength blended cement concrete incorporating volcanic ash: performance at high temperatures10.1016/j.cemconcomp.2006.01.013 ↗
23. Thermal incompatibility of concrete components and thermal properties of carbonate rocks
24. Mechanical properties of normal and high strength concretes subjected to high temperatures and using image analysis to detect bond deteriorations10.1016/j.conbuildmat.2010.01.020 ↗
25. Effect of high temperature or fire on heavy weight concrete properties10.1016/j.cemconres.2004.05.023 ↗
26. Mechanical properties and frost resistance of SF concrete10.1016/S0958-9465(97)00020-6 ↗
27. Appraisal of long-term effects of fly ash and silica fume on compressive strength of concrete by neural networks10.1016/j.conbuildmat.2005.08.009 ↗
28. Properties of plain and latex modified Portland cement pastes and concretes with and without superplasticizer10.1016/j.cemconres.2004.11.012 ↗
29. Whiting D, Schmitt J. Durability of in place concrete containing high-range water-reducing admixtures. NCHRP Report No. 296. Trans Res Board, Washington; 1987.
30. High performance concrete durability affected by many factors
31. Influence of superplasticizer type and mix design parameters on the performance of them in concrete mixtures10.1016/j.cemconcomp.2004.02.010 ↗
32. Effects of elevated temperature on compressive strength and weight loss of the light-weight concrete with silica fume and superplasticizer10.1016/j.cemconcomp.2008.01.004 ↗
33. The effects of different cement dosages, slumps and pumice aggregate ratios on the compressive strength and densities of concrete10.1016/S0008-8846(03)00048-6 ↗
34. Clarke · 1993
35. Effect of silica fume on mechanical properties of high-strength concrete10.1016/S0958-9465(03)00017-9 ↗
36. Tarun RN, Kraus RN. Temperature effects on high-performance concrete. Report No. CBU-2002-07 REP-460, Department of Civil Engineering and Mechanics College of Engineering and Applied Science, The University of Wisconsin, Milwaukee; 2002.
37. Koza · 1992
38. Ferreira C. Gene expression programming in problem solving. In: Invited tutorial of the 6th online world conference on soft computing in industrial applications; 2001a.10.1007/978-1-4471-0123-9_54 ↗
39. Gene expression programming: a new adaptive algorithm for solving problems
40. Ferreira C. Gene expression programming: mathematical modeling by an artificial intelligence; 2002.
41. www.gepsoft.com.