journal article·2010-04

Modeling temperature distribution and thermal property of asphalt concrete for laboratory testing applications

Qinwu Xu, Mansour Solaimanian

Publisher page

Abstract

Abstract Material characterization from laboratory tests on asphalt concrete or predictions of pavement performance are meaningful only if temperature of the material is well taken into account. This paper discusses an analytical model to predict the transient temperature distribution within asphalt concrete and to determine its thermal properties. The paper also presents the laboratory test program designed to validate the model. Temperature measurements were carried out on a cylindrical specimen at different times after the specimen with a steady-state low temperature (3.5 °C) was placed inside an environmental chamber in a steady-state high temperature (36 °C). The temperature magnitude at different positions and its variation with time was recorded at a sampling rate of 1 min −1 . The analytical temperature models based on the classical planar wall and long cylinder were established to approximate the temperature distribution of asphalt concrete specimens with the geometry of a short cylinder or a beam. Thermal diffusivity as a function of thermal conductivity and heat convection is solved from the models, and then back-calculation was conducted to achieve the thermal properties using curve fitting. It was found that the analytical model could predict the measured temperatures reliably. For the materials used in this research, a thermal conductivity of 2.88 W/m °C and diffusivity of 1.42 × 10 −6 m 2 /s were attained from the back-calculation. The time–temperature relationship, as determined from the prediction model, was found to be very sensitive to the geometric size and thermal properties of asphalt concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Smart Materials for Construction · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Measurement and evaluation of asphalt concrete thermal expansion and contraction
2. Modeling asphalt pavement rutting under accelerated testing10.1080/14680629.2008.9690144 ↗
3. Christison JT, Henderson KO. Response of asphalt pavement to low temperature climatic environments. In: Proceeding of the 3rd international conference on the structural design of asphalt pavements, vol. 1; 1971. p. 41–52.
4. Carmichael T, Boyer RE, Hokanson LD. Modeling heater techniques for in-place recycling of asphalt pavements. In: Proceeding of the association of asphalt pavement technologists, vol. 46; 1977. p. 41–52.
5. Himeno K, Watanabe T, Maruyama T. Temperature distributions in asphalt pavements. In: Proceeding of the 3rd paving in cold areas, Canada/Japan science and technology agreement mini workshop, Ottawa; 1987. p. 243–54.10.2208/jscej.1987.378_269 ↗
6. Solaimanian M, Bolzan P. Analysis of the integrated model of climatic effects on pavements. Strategic Highway Research Program, US Federal Highway Administration, Research Report No. SHRP-A-637, Washington, DC; 1993.
7. Prediction of temperature and moisture changes in pavement structures10.1061/(ASCE)0887-381X(1997)11:4(291) ↗
8. Mathematical model for calculation of pavement temperatures10.3141/1764-19 ↗
9. Model to predict pavement temperature profile: development and validation10.1061/(ASCE)0733-947X(2006)132:2(162) ↗
10. Wolfe RK, Heath GL, Colony DC. University of Toledo time–temperature model laboratory field validation. Report No. FHWA/OH-80/006, Department of Industrial Engineering, University of Toledo, Toledo, Ohio; 1980.
11. Thermal properties of some asphaltic concrete mixes
12. Phukan · 1985
13. Determination of thermal properties of pavement materials and unbound aggregates by transient heat conduction10.1520/JTE11319J ↗
14. New measurement of thermal properties of Superpave asphalt concrete10.1061/(ASCE)0899-1561(2005)17:1(72) ↗
15. Arpaci SV, Kao SH, Selamet A. Introduction to heat transfer. NJ; 1999.
16. A review of methods for predicting heat transfer coefficients for laminar uniform property boundary layer flow10.1016/0017-9310(62)90014-5 ↗
17. Transient temperature fields in functionally graded materials with different shapes under convective boundary conditions10.1007/s00231-006-0135-5 ↗
18. Çengel · 2002