Using ceramic wastes from tile industry as a partial substitute of natural aggregates in hot mix asphalt binder courses
Source abstract
Abstract
The technical feasibility of using recycled ceramic aggregates as a partial replacement of natural aggregates in hot mix asphalt was investigated. Recycled ceramic aggregates were obtained crushing stoneware and porcelain tile wastes from the ceramic industry. Both natural and recycled aggregates were characterized by suitability tests to be utilized in bituminous mixtures. Asphalt concrete binder course mixtures were designed through the Marshall method and the European CE marking standards. The mixtures were produced in both laboratory and asphalt plant, evaluating the influence of real production and scale factors. The addition of recycled ceramic aggregates increased binder, filler and air void contents, as well as the resistance to plastic deformation and the retained indirect tensile resistance after immersion. Nonetheless, worse moisture susceptibility with compressive strength and worse values of Marshall stability and deformation were observed. Up to 30% of natural aggregates were replaced by recycled ceramic aggregates with good mechanical conditions according to Spanish specifications. The main conclusion was that hot bituminous mixtures with a reasonable addition of recycled ceramic aggregates can satisfy binder course performance requirements for medium-low volume roads.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Shredded tires and rubber–sand as lightweight backfill10.1061/(ASCE)1090-0241(1999)125:2(132) ↗
2. Feasible use of recycled concrete aggregates and crushed clay brick as unbound road sub-base10.1016/j.conbuildmat.2005.01.045 ↗
3. Federal Highway Administration (FHWA). User guidelines for waste and by product materials in pavement, construction. FHWA-RD-97-148; 1997.
4. Hassan KE, Elghali L, Sowerby C. Development of new materials for secondary and recycled aggregates in highway infrastructure. Transport Research Laboratory (TRL); unpublished project report PR CPS/30/03; 2004.
5. Hot mix asphalt C&D waste as coarse aggregates10.1016/j.matdes.2010.12.058 ↗
6. Performance and thermal evaluation of incorporating waste ceramic aggregates in wearing layer of asphalt pavement10.1142/p883 ↗
7. Zohrabi M, Karami S. Applicability of alternative aggregates in asphalt pavements and their performance requirements. In: Second international conference on sustainable construction materials and technologies proceedings; 2010.
8. Van de Ven MFC, Molenaar AAA, Poot MR. Asphalt mixtures with waste materials: possibilities and constraints. In: 10th Conference on asphalt pavements for southern Africa proceedings; 2011.
9. Utilization of ceramic wastes in the construction sector10.4028/www.scientific.net/KEM.264-268.2509 ↗
10. Laboratory evaluation of incorporating waste ceramic materials into Portland cement and asphaltic concrete10.1016/j.conbuildmat.2009.08.024 ↗
11. Reusing ceramic wastes in concrete10.1016/j.conbuildmat.2009.10.023 ↗
12. Utilization of recycled brick powder as alternative filler in asphalt mixture10.1016/j.conbuildmat.2010.08.005 ↗
13. Muniandy R, Aburkaba E, Mahdi L. Effects of mineral filler particle size and type on permanent deformation of stone mastic asphalt mixtures. G. J. P&A Sc and Technol, vol. 2012v02i2; 2012. p. 50–64.
14. Gahlot V, Mandawra JP. Ceramic waste as a pavement construction material. Govt Polytechnic College, Bikaner, Rajasthan (India). Unpublished results; 2011. [accessed March 2013].
15. Einsatz von Sanitärkeramikrezyklat. Aufhellungsmaterial für Asphaltdeckschichten
16. Spanish Ministry of Public Works. Pliego de Prescripciones Técnicas Generales para obras de carreteras y puentes de la Dirección General de Carreteras (PG-3). Ministerio de Fomento, Dirección General de Carreteras; 2008.
17. UNE-EN 933. Spanish (European) Standards, tests for geometrical properties of aggregates. Spanish Association for Standardization and Certification (AENOR); 2012.
18. UNE-EN 1097. Spanish (European) Standards, tests for mechanical and physical properties of aggregates. Spanish Association for Standardization and Certification (AENOR); 2012.
19. NLT-159/00. Marshall Method for hot mix asphalt. Spanish centre for studies and experimentation on public works (CEDEX); 2000.
20. UNE-EN 12697. Spanish (European) Standards, Bituminous mixtures, test methods for hot mix asphalt. Spanish Association for Standardization and Certification (AENOR); 2012.