journal article·2013-12

Low embodied energy cement containing untreated RHA: A strength development and durability study

S.K. Antiohos, J.G. Tapali, M. Zervaki, J. Sousa-Coutinho, S. Tsimas, V.G. Papadakis

Publisher page

Abstract

Abstract In contrast to common approach – that often involves extensive pre-grinding – the utilization potential of rice husk ash (RHA: by-product of rice industry) as a supplementary cementing material, in its untreated form was examined. This is to meet industry’s increasing awareness for lower embodied energy cement and concrete. Given the availability of current raw materials in cement manufacturing, what is needed is to be able to achieve an optimum approach, between sustainability and durability when designing concrete structures. Under this frame, as-produced RHAs (D50 of approx. 70 μm) were examined with respect to their inherent characteristics and their impact on the performance of cement-based mortars. Strength, hydration and durability properties were considered. Untreated RHA exhibits moderate pozzolanicity and a low efficiency factor of approximately 0.5–0.6. Its very high chemical reactivity (active silica ratio of approx. 90%) cannot be exploited since the lack of adequate specific surface slows down its engagement in hydration reactions. Taking into consideration their untreated nature, it can be supported that they exhibit an acceptable strength potential after 28 days, complying – even marginally – with the strength class (42.5) of the used cement. Durability results revealed that there is no need to pre-treat RHA in order to achieve equal or even better performance than mortar with plain cement in terms of sorptivity (50% increase for 15% RHA usage) and resistivity. Untreated RHA however fails – as most SCMs do – to improve carbonation resistance since for a 15% cement replacement, carbonation depth was almost doubled. Overall, results indicate that usage of untreated RHA in cement-based systems is an alternative to decrease their carbon profile, as long as cement replacement is kept relatively low (below 15%).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Green house gas emissions due to concrete manufacture10.1065/lca2007.05.327 ↗
2. Humphreys K, Mahasenan M. Toward a sustainable cement industry. Sub-study 8, climate change, World Business council for, sustainable development; 2002.
3. Hammond G, Jones C. Embodied carbon: the inventory of carbon and energy (ICE). BSRIA Guide BG, 10/2011, Building Services Research and Information Association, Berkshire, UK; 2011. p. 128.
4. EN 15643-2. Sustainability of construction works – assessment of buildings. Part 2: Framework for the assessment of environmental performance. European Committee for Standardization. Brussels, Belgium; 2011.
5. Sustainable concrete mix design for a target strength and service life10.12989/cac.2013.12.6.755 ↗
6. Rice husk ash (RHA) effectiveness in cement and concrete as a function of reactive silica and fineness
7. Mehta PK. Rice husk ash as a mineral admixture in concrete. In: Proceedings of the 2nd international seminar on durability of concrete: aspects of admixtures and industrial by-products, Gothenburg, Sweden; 1989. p. 131–6.
8. Mehta PK. Mineral admixtures for concrete – an overview of recent developments. In: Proceedings of engineering foundation conference: advances in cement and concrete, Durham, ASCE; 1994.
9. The combined benefits of CPF and RHA in improving the durability of concrete structures10.1016/S0958-9465(01)00055-5 ↗
10. Study on the pozzolanic properties of rice husk ash by hydrochloric acid pretreatment10.1016/j.cemconres.2003.09.005 ↗
11. Effect of rice-husk ash on durability of cementitious materials10.1016/j.cemconcomp.2010.07.008 ↗
12. Influence of the use of rice husk ash on the electrical resistivity of concrete: a technical and economic feasibility study10.1016/j.conbuildmat.2009.06.039 ↗
13. The effect of rice husk ash on mechanical properties and durability of sustainable concretes
14. Mineral admixtures in cement and concrete
15. ASTM C1437-01 · 2001
16. Supplementary cementing materials in concrete – Part I: Efficiency and design10.1016/S0008-8846(02)00827-X ↗
17. Hydration of high-volume fly ash cement pastes10.1016/S0958-9465(00)00044-5 ↗
18. Permeability of concrete as a criterion of its durability, C: Determination of the capillary absorption of water of hardened concrete
19. Water sorptivity of mortars and concretes. A review10.1680/macr.1989.41.147.51 ↗
20. NT BUILD 492. Concrete, mortar and cement-based materials: chloride migration coefficient from non-steady-state migration experiments. NORDTEST Method, Finland; 1999.
21. RILEM CPC-18 measurement of hardened concrete carbonation depth
22. Experimental investigation and mathematical modeling of the concrete carbonation problem10.1016/0009-2509(91)85060-B ↗
23. Use of recycled concrete aggregate in fly-ash concrete10.1016/j.conbuildmat.2011.07.023 ↗
24. Thermal treatment of kaolin: the effect of mineralogy on the pozzolanic activity10.1016/S0169-1317(01)00040-0 ↗
25. Kostuch JA, Walters V, Jones TR. High performance concretes incorporating metakaolin: a review. In: Proceedings of the international symposium ‘Concrete 2000’, Dundee, Scotland; 1993. p. 1799–808.
26. Assessment of the effects of rice husk ash particle size on strength, water permeability and workability of binary blended concrete10.1016/j.conbuildmat.2010.04.045 ↗
27. Supplementary cementing materials in concrete: Part II: A fundamental estimation of the efficiency factor10.1016/S0008-8846(02)00829-3 ↗
28. Neville · 1995
29. Degree of hydration and gel/space ratio of high-volume fly ash/cement systems10.1016/S0008-8846(00)00213-1 ↗
30. Effect of calcium formate as an accelerator on the physicochemical and mechanical properties of pozzolanic cement pastes10.1016/j.cemconres.2003.11.015 ↗
31. Corrosion performance of rice husk ash blended concrete10.1016/j.conbuildmat.2006.05.037 ↗
32. Rice husk ash – pozzolanic material for sustainability
33. Performance of rice husk ash produced using a new technology as a mineral admixture in concrete10.1016/S0008-8846(03)00038-3 ↗
34. McGrath P. Development of test methods for predicting chloride penetration into high performance concrete, PhD thesis, Department of Civil Engineering, University of Toronto; 1996.
35. The resistivity of pore water solution – a decisive parameter of rebar corrosion and repair methods10.1016/0950-0618(95)00029-1 ↗
36. Effect of moisture, chloride and sulphate contamination on the electrical resistivity of Portland cement concrete10.1016/0950-0618(95)00078-X ↗
37. Broomfield · 1997
38. Physicochemical characterization of Indian biomass ashes10.1016/j.fuel.2007.05.045 ↗
39. Improving the performance of ternary blended cements by mixing different types of fly ashes10.1016/j.cemconres.2007.02.017 ↗
40. Re-use of spent catalyst from oil-cracking refineries as supplementary cementing material10.1016/S1672-2515(07)60238-3 ↗