journal article·2013-04

A new approach to model nailed and screwed timber joints using the finite element method

E-M. Meghlat, M. Oudjene, H. Ait-Aider, J-L. Batoz

Publisher page

Abstract

This paper presents a novel way to simulate the behaviour of nailed and screwed timber joints, using the finite element method. In order to avoid the detailed 3D modelling of nails (or screws) using solid elements, which is costly ineffective, the authors proposed and developed an approach based on beam-to-solid coupling where the nails (or screws) were modelled using one-dimensional beam element, while the assembled timber members were modelled using solid elements. To deal with the coupling between the degrees of freedom (d.o.f.) belonging to the screws and those belonging to the timber, the existing 2-node beam element has been modified involving in a 4-node beam element with only translational d.o.f. per node, leading in fact to a full compatibility with solid elements. Using the numerical approach developed, the linear elastic behaviour of a push-out shear test of a single shear timber-to-timber connection was successfully simulated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Load-Bearing Analysis · Mechanical Behavior of Composites · Wood Treatment and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Remarks on the slip modulus of nailed connections for linear analysis of plywood timber beams10.1016/j.conbuildmat.2009.02.037 ↗
2. Evaluation of perforated steel plates as connection in glulam-concrete composite structures10.1016/j.conbuildmat.2011.08.045 ↗
3. Ehlbeck J, Larsen HJ. Eurocode 5 – design of timber structures: joints. In: Proceedings international workshop on wood connectors, F.P. Society, Madison, USA; 1993. p. 9–23.
4. EN 1995-1-1. Eurocode 5: design of timber structures – part 1.1: general rules and rules for buildings. European committee for standardization, Brussels, Belgium (E); 2004.
5. Johansen KW. Theory of timber connections. International Association of Bridge and Structural Engineering Publications, vol. 9; 1949. p. 249–62.
6. EN 26891. Timber structures – joints made with mechanical fasteners – general principles for the determination of strength and deformation characteristics, ISO 6891-1983 (E); 1991.
7. Experimental analysis of laterally loaded nailed timber-to-concrete connections10.1016/j.conbuildmat.2007.11.011 ↗
8. Effective lateral resistance of timber-plywood-timber joints connected with nails10.1007/s10086-012-1250-1 ↗
9. Effective lateral resistance of combined timber joints with nails and bolts10.1007/s10086-011-1216-8 ↗
10. Theoretical and experimental analysis of timber-to-timber joints connected with inclined screws10.1016/j.conbuildmat.2010.03.007 ↗
11. A new approach to obtain flat nail embedding strength of double-sided nail plate joints10.1016/j.conbuildmat.2010.07.033 ↗
12. Nail and screw withdrawal strength of laminated veneer lumber made up hardwood and softwood layers10.1016/j.conbuildmat.2005.12.015 ↗
13. Kuenzi EW. Theoretical design of a nailed or bolted joint under lateral load, Forest Products Laboratory, Forest Service, United States Department of Agriculture, Madison, USA; 1955 (Rep. D1951). 31 p.
14. Hetenyi · 1946
15. Load-slip characteristics of nails
16. Analysis of load-slip characteristics of nailed wood joints: application of a two-dimensional geometric nonlinear analysis10.1007/s10086-003-0519-9 ↗
17. Yield load prediction of nailed timber joints using nail diameter and timber specific gravity10.1007/s00226-004-0261-5 ↗
18. Modelling deformation in nailed, thin-webbed timber box beams10.1016/S0045-7949(01)00138-9 ↗
19. A simplified model for withdrawal of screws from end-grain of timber10.1016/j.conbuildmat.2011.10.066 ↗
20. The influence of nail ductility on the load capacity of a glulam truss structure10.1016/j.engstruct.2004.01.012 ↗
21. Balogh J, Wieligmann M, Gutkowski R, Haller P. Stress–strain behavior of connections for partially composite wood–concrete floors and deck systems. In: 2nd Material specialty conference of the Canadian society for civil engineering, vol. 63; 2007. p. 505–21.
22. Finite element modelling of composite beams with full and parcial shear connection
23. Chuan DYE, Fragiacomo M, Aldi P, Mazzilli M, Kuhlmann U. Performance of notched coach screw connection for timber–concrete composite floor system. NZ Timber Design J, vol. 17: p. 4–10.
24. Crocetti R, Sartori T, Flansbjer M. Timber–concrete composite structures with prefabricated FRC slab. In: Ceccotti A, van de Kuilen J.-W, editors. The WCTE 2010 conference proceedings, June 20–24, Riva del Garda, Italy; 2010.
25. Junior CC, Molina JC. Numerical modeling strategy for analyzing the behaviour of shear connectors in wood–concrete composite systems. In: Ceccotti A, van de Kuilen J.-W, editors. The WCTE 2010 conference proceedings, June 20–24, Riva del Garda, Italy; 2010.
26. Three-dimensional finite element analysis of the Japanese traditional post-and-beam connection10.1007/s10086-010-1151-0 ↗
27. Failure mechanisms of dowel-type fastener connections perpendicular to grain10.1016/j.engstruct.2011.05.018 ↗
28. Realfonzo · Composites Part B · 2012
29. Bucalem · 2011
30. Meghlat E.-M, Oudjene M, Ait-Aider H, Batoz J.-L. A one-dimensional 4-node shear-flexible beam element for beam-to-solid modelling in mechanically jointed connections made with nails or screws. In: Eberhardsteiner J et al., editors. European congress on computational methods in applied sciences and engineering (ECCOMAS 2012), Vienna, Austria, September 10–14; 2012.
31. An efficient DKT rotation free shell element for springback simulation in sheet metal forming10.1016/S0045-7949(02)00256-0 ↗
32. Mechanical behaviour and 3D stress analysis of multi-layered wooden beams made with welded-through wood dowels10.1016/j.compstruct.2011.08.029 ↗
33. Finite element modelling of wooden structures at large deformations and brittle failure prediction10.1016/j.matdes.2009.05.024 ↗
34. Elasto-plastic constitutive law for wood behaviour under compressive loadings10.1016/j.conbuildmat.2009.06.034 ↗
35. Application of numerical modelling to dowel-welded wood joints10.1163/016942409X12541266699473 ↗