Characterization of the effect of foaming water content on the performance of foamed crumb rubber modified asphalt
Source abstract
Abstract
Abstract Crumb rubber modified asphalt (CRMA) is a “green” paving material which provides an effective way to recycle waste tires. However, it also faces the criticism of increased energy consumption and air emissions during construction. Foaming technology allows CRMA to be constructed at lower temperatures, but very limited research has been conducted on the influence of foaming water content on the properties of foamed CRMA binder. In this study, foamed CRMA binders were produced at various foaming water contents (0%, 1%, 2%, 3%, and 4%) in laboratory, and their high-temperature performance, low-temperature performance, temperature sensitivity, and fatigue resistance were characterized and compared through laboratory testing. The test results indicated that foamed CRMA binders provide slightly worse high-temperature performance but better low-temperature performance, temperature stability, and fatigue resistance, compared to regular CRMA binder. With the increase of foaming water content, the high-temperature performance of foamed CRMA binder drops off, the low-temperature performance of foamed CRMA binder first decreases and then increases, and the temperature stability and fatigue resistance of foamed CRMA binder keep increasing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Federal Highway Administration (FHWA). Warm mix asphalt. ; 2012 [accessed 19.01.12].
2. Hurley GC, Prowell BD. Evaluation of Sasobit® for use in warm mix asphalt, NCAT, Report 05-06; 2005.
3. Matthew · 2006
4. Laren OR, Moen O, Robertus C, Koenders BG. WAM foam asphalt production at lower operating temperatures as an environmental friendly alternative to HMA-Proceedings 3rd Eurasphalt & Eurobitume Congress. Vienna; 2004.
5. Short-term performance of plant-mixed warm stone mastic asphalt10.3141/2306-10 ↗
6. .
7. Yang SR. The influence on performance of binder and mixture for WMA additive. Chongqing Jiaotong University; 2008.
8. Mechanical property characterization of warm-mix asphalt prepared with chemical additives10.1061/(ASCE)MT.1943-5533.0000810 ↗
9. Nazzal N, Abbas A, Ali A, Roy A. Investigation of foamed warm mix asphalt performance using the MEPDG. GeoCongress; 2012.10.1061/9780784412121.165 ↗
10. Laboratory and field evaluations of foamed warm-mix asphalt projects10.3141/2126-15 ↗
11. Stabilisation with foamed asphalt of aggregates commonly used in low volume roads
12. Laboratory evaluation of moisture susceptibility of foamed warm mix asphalt containing high percentages of RAP10.1016/j.conbuildmat.2012.02.095 ↗
13. Influence of RAP on performance of cold recycling mixtures with foamed asphalt
14. Effects of long-term aging on moisture sensitivity of foamed WMA mixtures containing moist aggregates10.1617/s11527-011-9763-4 ↗
15. A long-term ultraviolet aging procedure on foamed WMA mixtures10.1617/s11527-013-0031-7 ↗
16. Laboratory evaluation of moisture damage and rutting potential of WMA foam mixes10.1080/10298436.2011.597859 ↗
17. Investigation of asphalt binder containing various crumb rubbers and asphalts10.1016/j.conbuildmat.2012.11.063 ↗
18. Laboratory evaluation on high temperature viscosity and low temperature stiffness of asphalt binder with high percent scrap tire rubber10.1016/j.conbuildmat.2011.06.061 ↗
19. Impacts of types and application rates of warm mix additives on CRMA10.1061/(ASCE)MT.1943-5533.0000765 ↗
20. American Association of State Highway and Transportation Officials (AASHTO). Determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR), AASHTO T315; 2006.
21. Properties of polymer modified binders and relationship to mix and pavement performance
22. The influence of crumb rubber modifier (CRM) microstructures on the high temperature properties of CRM binders10.1080/10298430500373336 ↗
23. American Association of State Highway and Transportation Officials (AASHTO). Determining the rheological properties of asphalt binder using a dynamic shear rheometer (DSR), AASHTO T315[S]; 2006.
24. Evaluation methods of SBS modified-asphalt binders
25. The rheological properties of asphaltic bitumen
26. Asphalt cements: Pen-Vis number and its application to moduli of stiffness10.1520/JTE10215J ↗
27. Properties of asphalt cements
28. Chemical and rheological evaluation of aging properties of SBS polymer modified bitumens10.1016/S0016-2361(97)00283-4 ↗
29. Analysis and discussion on the index of temperature susceptibility for asphalt binders
30. Research on the evaluation index of temperature sensitivity of CRMA
31. Migliori F, Corte JF. Comparative study of RTFOT and PAV aging simulation laboratory tests. In: Proc Eurobitumen Workshop 99 (Luxembourg), paper No. 045; 1999.
32. Relationship between penetration grade and performance high temperature grade of conventional asphalt binder
33. Research on the high-and-low temperature performance evaluation system of asphalt-mineral filler mastic
34. AASHTO standard specification for transportation materials and methods of sampling and testing 2004 edition.