journal article·2015-05

Effect of steel and synthetic fibers on shear strength of RC beams without shear stirrups

Dipti Ranjan Sahoo, Kaushik Maran, Avdhesh Kumar

Publisher page

Abstract

Abstract This study presents the influence of the type and volume fraction of fibers in the concrete mix on the shear strength of RC beams. One RC (control) and six fiber reinforced concrete (FRC) beam specimens are tested under the gradually increasing monotonic loading. Both high-modulus (steel) and low-modulus (polypropylene) fibers of either 0.5% and 1% volume fraction in concrete are used in FRC specimens. Shear stirrups are completely eliminated in the half-span of the FRC specimens. A better post-peak residual strength response is noticed in case of all FRC beam specimens due to multiple cracking associated with the fiber bridging action. The main parameters investigated are shear strength, failure mechanism and displacement ductility. In the absence of shear stirrups, the peak shear resistance and mid-span displacement of the FRC specimen 1% of polypropylene fibers only reached about 70% and 50% of corresponding values for the RC specimen. The FRC specimens with combined steel and polypropylene fibers of minimum volume fraction of 0.5% in the concrete reached the same shear strength as RC specimen in the absence of shear stirrups. However, the shear resistance and deformability values are improved by 20% and 40%, respectively, when the polypropylene fibers of 1% of volume fraction were added to the concrete in addition to the steel fiber of 1% fiber content. Further, multiple cracks of smaller crack width are noticed at the failure stage of the CFRC specimens indicating the better fiber bridging action of combined metallic and nonmetallic fibers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Fibre reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineering10.1016/j.compstruct.2008.03.006 ↗
2. Gettu R, Barragán B, García T, Fernández C, Oliver R. Steel fiber reinforced concrete for the Barcelona metro line 9 tunnel lining. In: 6th international RILEM symposium on fibre-reinforced concretes (BEFIB’2004), Lake Como, Italy; 1981. p. 141–56.
3. The application of fibre reinforced shotcrete as primary support for a tunnel in flysch10.1016/j.tust.2009.05.003 ↗
4. Fiber-reinforced concrete: an overview after 30 years of development10.1016/S0958-9465(96)00046-7 ↗
5. 2008
6. Fibre-reinforced concrete-new design perspectives10.1617/s11527-009-9529-4 ↗
7. Pullout behaviour of polypropylene fibers from cementitious matrix10.1016/j.cemconres.2004.02.014 ↗
8. Influence of different fibers on plastic shrinkage cracking of concrete
9. Flexural performance of fibre reinforced concrete made with steel and synthetic fibres10.1016/j.conbuildmat.2012.06.042 ↗
10. An experimental study on the tensile strength of steel fiber reinforced concrete10.1016/j.compositesb.2009.12.003 ↗
11. Fracture properties of concrete reinforced with steel– polypropylene hybrid fibres10.1016/S0958-9465(00)00033-0 ↗
12. Effects of fibre geometry and volume fraction on the flexural behaviour of steel-fibre reinforced concrete10.1111/j.1475-1305.2009.00652.x ↗
13. Mechanical properties of hybrid fiber-reinforced concrete at low fiber volume fraction10.1016/S0008-8846(02)00913-4 ↗
14. Mechanical properties and durability of polypropylene fiber reinforced high-volume fly ash concrete for shotcrete applications
15. Influence of polypropylene fiber geometry on plastic shrinkage cracking in concrete10.1016/j.cemconres.2006.01.010 ↗
16. Effect of polypropylene fibers on shrinkage and cracking of concretes10.1617/s11527-008-9361-2 ↗
17. Effect of shrinkage reducing admixture on flexural behaviours of fiber reinforced cementitious composites10.1016/j.cemconcomp.2011.12.004 ↗
18. Study on residual behaviour and flexural toughness of fibre cocktail reinforced self-compacting high performance concrete after exposure to high temperature10.1016/j.conbuildmat.2011.04.058 ↗
19. Strength properties of nylon- and polypropylene fiber-reinforced concretes10.1016/j.cemconres.2004.06.033 ↗
20. Evaluation of engineering properties for polypropylene fibre reinforced concrete
21. Influence of the properties of polypropylene fibres on the fracture behaviour of low-, normal- and high-strength FRC10.1016/j.conbuildmat.2013.03.098 ↗
22. Effect of aspect ratio and volume fraction of steel fiber on the mechanical properties of SFRC10.1016/j.conbuildmat.2006.05.025 ↗
23. Fiber type effects on the performance of steel fiber reinforced concrete
24. Concrete reinforced with deformed steel fibers: Part II-Toughness characterization
25. Mechanical properties of steel fiber-reinforced concrete10.1061/(ASCE)0899-1561(2007)19:5(385) ↗
26. Comparative flexural behavior of four fiber reinforced cementitious composites10.1016/j.cemconcomp.2008.08.002 ↗
27. Metallic fiber reinforced concrete: Effect of fiber aspect ratio on the flexural properties
28. Experimental evaluation of fiber reinforced concrete fracture properties10.1016/j.compositesb.2009.09.002 ↗
29. Flexural behaviour of RC beams in fibre reinforced concrete10.1016/j.compositesb.2012.06.003 ↗
30. Effects of fibre volume fraction on the compressive and flexural experimental behaviour of SFRC
31. Shear strength of steel fiber-reinforced concrete beams without stirrups
32. Shear strength of beams with deformed steel fibers
33. Design of SFRC structural elements: flexural behavior prediction10.1617/s11527-011-9785-y ↗
34. Effect of steel fiber content on behavior of concrete beams with and without stirrups10.14359/51686821 ↗
35. ACI 318-08 · 2008
36. Wang P, Huang Z, Jiang J, Wu Y. Performance of hybrid fiber reinforced concrete with steel fibers and polypropylene fibers. In: Proc Int Conf Civ Eng Urb Plan (CEUP 2012), Yantai, China, 2012.10.1061/9780784412435.081 ↗
37. Mechanical properties of reinforced concrete and materials polypropylene fiber and the effects of pozzolanic10.1016/0958-9465(95)00003-8 ↗
38. Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibres10.1016/j.cemconcomp.2007.03.006 ↗
39. Mechanical properties of polypropylene hybrid fiber reinforced concrete10.1016/j.msea.2008.05.037 ↗
40. Influence of steel and polypropylene fibers on flexural behavior of RC beams
41. IS-8112 · 2003
42. IS-10262 · 2009
43. IS-516 · 1959
44. IS-5816 · 1999
45. ASTM C78, C78M · 2010