Effect of w/c and temperature on the early-stage hydration heat development in Portland-limestone cement
Source abstract
Abstract
Abstract The early-stage hydration heat characteristics of the blended binder containing 80% of Portland cement CEM I 42.5 R and 20% of limestone are studied in a dependence on w/c and temperature. The specific hydration heat power and the specific hydration heat are monitored over the time period of 72 h using an isothermal heat flow calorimeter. Experimental results show an active role of limestone in the hydration process. After 72 h its net contribution to the specific hydration heat of the blended binder, QL, is significant for all studied combinations of w/c and temperature. At 20 °C QL is more pronounced for w/c = 0.35 (51.8 J/g-binder) than w/c = 0.50 (41.8 J/g-binder), contrary to 35 °C where a dependence of QL on w/c is not evidenced (34.6 J/g-binder for w/c = 0.35 and 35.5 J/g-binder for w/c = 0.50). Unlike the reference Portland cement, the apparent activation energy of the analyzed Portland-limestone cement is found to depend on w/c; for w/c = 0.5 it is 35.7 kJ/mol while for w/c = 0.35 only 28.0 kJ/mol.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Experimental investigation and theoretical modeling of silica fume activity in concrete10.1016/S0008-8846(98)00171-9 ↗
2. Improving cement-based materials by using silica fume10.1023/A:1013889725971 ↗
3. Hydration heat kinetics of concrete with silica fume10.1016/j.conbuildmat.2009.06.008 ↗
4. Influence of metakaolin on the properties of mortar and concrete: a review10.1016/j.clay.2008.11.007 ↗
5. High performance concrete with czech metakaolin: experimental analysis of strength, toughness and durability characteristics10.1016/j.conbuildmat.2010.01.017 ↗
6. Influence of metakaolin as supplementary cementing material on strength and durability of concretes10.1016/j.conbuildmat.2011.12.050 ↗
7. Fly-ash influence on the properties of high performance concrete
8. Heat evolution during the hydration of Portland cement in the presence of fly ash, calcium hydroxide and super plasticizer10.1016/j.tca.2012.08.028 ↗
9. Determination of cement hydration and pozzolanic reaction extents for fly-ash cement pastes10.1016/j.conbuildmat.2011.07.007 ↗
10. High performance concrete containing lower slag amount: a complex view of mechanical and durability properties10.1016/j.conbuildmat.2008.11.018 ↗
11. Durability and mechanical properties of high strength concrete incorporating ultra fine Ground Granulated Blast-furnace Slag10.1016/j.conbuildmat.2012.11.052 ↗
12. Resistance of concrete with blast-furnace slag against chlorides, investigated by comparing chloride profiles after migration and diffusion10.1617/s11527-012-9885-3 ↗
13. Combined effect of chemical nature and fineness of mineral powders on Portland cement hydration10.1617/s11527-009-9519-6 ↗
14. Role of the filler on Portland cement hydration at early ages10.1016/j.conbuildmat.2011.07.021 ↗
15. Application of large-volume calorimetry for monitoring the early-stage hydration heat development in cement-based composites as a function of w/c10.1016/j.tca.2012.07.028 ↗
16. Studies on the carboaluminate formation in limestone filler-blended cements10.1016/S0008-8846(01)00491-4 ↗
17. Influence of finely ground limestone on cement hydration10.1016/S0958-9465(98)00020-1 ↗
18. Early hydration of portland cement with crystalline mineral additions10.1016/j.cemconres.2004.12.001 ↗
19. Cement hydration in the presence of high filler contents10.1016/j.cemconres.2005.03.008 ↗
20. Monitoring the early-age hydration of self-compacting concrete using ultrasonic p-wave transmission and isothermal calorimetry10.1617/s11527-011-9717-x ↗
21. Hydration of blended portland cements containing calcium-aluminosilicate glass powder and limestone10.1111/j.1551-2916.2011.04902.x ↗
22. Improvement of the early-age reactivity of fly ash and blast furnace slag cementitious systems using limestone filler10.1617/s11527-010-9637-1 ↗
23. Xiong X, van Breughel K. Effect of limestone powder and temperature on cement hydration process. In: Proceedings of IPCM – a new era of building, Cairo, Feb., vol. 18–20, 2003, p. 231–40.
24. Portland-limestone cements. Their properties and hydration compared to those of other composite cements10.1016/j.cemconcomp.2004.02.006 ↗
25. Research on effect of limestone and gypsum on C3A, C3S and PC clinker system10.1016/j.conbuildmat.2007.06.013 ↗
26. Calorimetric characterization of Portland limestone cement produced by intergrinding10.1007/s10973-011-1575-9 ↗
27. Effects of the type of calorimeter and the use of plasticizers and hydrophobizers on the measured hydration heat development of FGD gypsum10.1007/s10973-007-8709-0 ↗
28. General hydration model for portland cement and blast furnace slag cement10.1016/0008-8846(95)00048-H ↗
29. Effect of temperature upon the strength development rate and upon the hydration kinetics of cements
30. Conception of an isothermal calorimeter for concrete-determination of the apparent activation energy
31. Effect of temperature on the early-stage hydration characteristics of Portland cement: a large-volume calorimetric study10.1016/j.conbuildmat.2012.06.025 ↗
32. Černý · 2002
33. Influence of limestone content, gypsum content and fineness on early age properties of Portland limestone cement produced by inter-grinding10.1016/j.cemconcomp.2010.10.001 ↗
34. Isoconversional methods. Fundamentals, meaning and application10.1023/B:JTAN.0000027811.80036.6c ↗
35. Considerations on the single-step kinetics approximation10.1007/s10973-005-0945-6 ↗