Effect of prefiring and firing dwell times on the properties of artificial lightweight aggregates
Source abstract
Abstract
Abstract The effects of the prefiring and firing dwell times on the chemical, physical and microstructural properties of artificial lightweight aggregates (LWAs) produced from mining and industrial waste with a tubular rotary kiln were determined. It was observed that 1.5 and 3 min of prefiring and firing dwell times, respectively, were more adequate than 5 and 4 min for producing less dense artificial aggregates (0.98 g/cm 3 vs 1.64 g/cm 3 ). The LWAs manufactured with shorter dwell times could be used in gardening and horticulture, geotechnical applications and/or as insulation materials. LWAs manufactured with longer dwell times could also be used for insulating lightweight concrete and/or prefabricated lightweight structures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. ECOBA (European Coal Combustion Product Association). ; 2010 [accessed 15.11.12].
2. Application of sugar foam to a pyrite-contaminated soil10.1016/j.mineng.2005.10.011 ↗
3. UNE-EN-13055-1. Áridos ligeros. Parte 1: Áridos ligeros para hormigón, mortero e inyectado, 2003.
4. Bodycomb · 2000
5. Mason · 2000
6. Production of lightweight aggregates from waste materials
7. Microstructure and mineralogy of lightweight aggregates produced from washing aggregate sludge, fly ash and used motor oil10.1016/j.cemconcomp.2010.07.014 ↗
8. Microstructure and mineralogy of lightweight aggregates manufactured from mining and industrial wastes10.1016/j.conbuildmat.2011.03.053 ↗
9. Rice · 1998
10. Preparation and mechanism of ultra-lightweight ceramic produced from sewage sludge10.1016/j.jhazmat.2009.11.001 ↗
11. Characterization of lightweight aggregates manufactured from washing aggregate sludge and fly ash10.1016/j.resconrec.2009.04.008 ↗
12. Production of hollow lightweight aggregates by controlled preheating10.1111/j.1151-2916.1961.tb11662.x ↗
13. Development and tests of lightweight aggregate using sewage sludge for nonstructural concrete10.1016/j.conbuildmat.2005.09.009 ↗
14. Production of lightweight aggregates from mining and industrial wastes10.1016/j.jenvman.2009.03.009 ↗
15. Effect of sintering temperature on the properties of sludge ceramics and fly-ash ceramics
16. Heavy metal distribution and chemical speciation in tailings and soils around a Pb–Zn mine in Spain10.1016/j.jenvman.2008.04.007 ↗
17. Lightweight aggregates based on industrial wastes
18. Physical, mechanical and microscopic characterization of cold bonded fly ash lightweight aggregates10.3989/mc.2002.v52.i268.313 ↗
19. Lithium metaborate flux in silicate analysis10.1016/S0003-2670(01)80963-6 ↗
20. Relation of chemical properties to the bloating of clays10.1111/j.1151-2916.1951.tb11619.x ↗
21. Zeolitic tuffs as raw materials for lightweight aggregates10.1016/j.clay.2003.08.005 ↗
22. Effects of sand addition on production of lightweight aggregates from Tunisian smectite-rich clayey rocks10.1016/j.clay.2006.09.006 ↗
23. Sewage-sludge utilization in Tokyo10.2166/wst.1991.0629 ↗
24. UNE-103-103. Determinación del límite líquido de un suelo por el método del aparato de Casagrande, 1994.
25. UNE-103-104. Determinación del límite plástico de un suelo, 1993.
26. UNE-EN-1097-3. Ensayos para determinar las propiedades mecánicas y físicas de los áridos. Parte 3: determinación de la densidad aparente y la porosidad, 1999.
27. UNE-EN-1097-6. Ensayos para determinar las propiedades mecánicas y físicas de los áridos. Parte 6: determinación de la densidad de partículas y la absorción de agua, 2000.
28. Measurement and statistics of single pellet mechanical strength of differently shaped catalysts10.1016/S0032-5910(00)00231-X ↗
29. Relationship between particle size and fracture energy or impact velocity required to fracture as estimated from single particle crushing10.1016/0032-5910(87)80030-X ↗
30. Arsenic and lead (beudantite) contamination of agricultural rice soils in the Guandu Plain of northern Taiwan10.1016/j.jhazmat.2010.05.123 ↗
31. Solid-phase control on the mobility of potentially toxic elements in an abandoned lead/zinc mine tailings impoundment, Taxco, Mexico10.1016/j.apgeochem.2006.07.017 ↗
32. Deer · 1992
33. Micromineralogy of mine wastes in relation to the lead bioavailabilty, Butte, Montana10.1021/es00044a018 ↗
34. Mobilization and retention of heavy metals in mill-tailing from Garpenberg sulfide mines, Sweden10.1016/S0048-9697(97)05433-8 ↗
35. Study of fine sediments for making lightweight aggregate10.1177/0734242X07077615 ↗
36. Processing of some non-conventional ceramic raw materials and by-products10.1016/0272-8842(86)90047-7 ↗
37. The thermal dissociation of calcium hydroxide10.1039/jr9570003873 ↗
38. The influence of different CaO source in the production of anorthite ceramics10.1016/j.ceramint.2008.02.024 ↗
39. Microstructure of pre-wetted aggregate on lightweight concrete10.1016/S0360-1323(98)00060-2 ↗
40. Effect of lightweight fly ash aggregate microstructure on the strength on concretes10.1016/S0008-8846(97)00019-7 ↗
41. EHE-08. Instrucción de Hormigón Estructural. 2nd ed. Ministry of Development of Spain, Centre for Publications: Permanent Concrete Commission; 2009.
42. Optiroc Áridos Ligeros SA. La Arcilla Expandida. In: Arlita. Arcilla Expandida. Manual General. 2000, p. 5–29.
43. Production of lightweight aggregates from mining residues, heavy metal sludge, and incinerator fly ash10.1016/j.jhazmat.2006.09.094 ↗