Influence of raw rice husk addition on structure and properties of concrete
Source abstract
Abstract
Abstract When concrete is exposed to high temperatures, vapor pressure increases and the concrete may spall. In order to prevent this, polypropylene fibers are added to concrete. However, it is known that these fibers produce harmful gases at high temperatures that affect health. In this study, instead of polypropylene fibers, the usability of raw rice husk which is a by-product of paddy-rice dehusking was tested in normal strength concrete. Four concrete series were produced with a constant water/cement ratio and slump and exposed to high temperatures. Compressive strength, density, ultrasonic pulse velocity, thermal conductivity and water vapor diffusion resistance factor were investigated experimentally. FT-IR, SEM, XRD and BET analyses were also performed. Although the use of rice husk reduces mechanical strength, it provides benefits in other properties. Rice husk reduces vapor pressure within the concrete thus prevents spalling and releases less harmful gases than polypropylene fibers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire effects on concrete materials · Concrete Properties and Behavior · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. An approach for modelling concrete spalling in finite strains10.1016/j.matcom.2009.05.011 ↗
2. Comparison of the strength and durability performance of normal and high-strength pozzolanic concretes at elevated temperatures10.1016/S0008-8846(01)00580-4 ↗
3. The influence of high temperature on the physical and mechanical properties of ordinary Portland cement and silica fume mortar
4. Khoury GA. Fire & assessment, international centre for mechanical sciences, course on effect of heat on concrete; 2003.
5. Concrete at high temperature with application to tunnel fire
6. Explosive spalling and residual mechanical properties of fiber-toughened high-performance concrete subjected to high temperatures10.1016/j.cemconres.2005.12.014 ↗
7. On residual strength of high-performance concrete with and without polypropylene fibres at elevated temperatures10.1016/j.firesaf.2005.11.004 ↗
8. Food and Agriculture Organization Statistic Division, http://faostat.fao.org; 2010.
9. Optimum production conditions for reactive rice husk ash10.1617/s11527-010-9581-0 ↗
10. Environmental assessment of electricity production from rice husk: a case study in Thailand
11. Pyrolysis of rice husk
12. Mehta · 2006
13. Mazlum F. Pozzolanic Properties of rice husk ash and the effect of ash on durability of cement mortars. PhD thesis, Istanbul Technical University; 1989 [in Turkish].
14. Origin of the pozzolanic effect of rice husks10.1016/S0950-0618(00)00045-3 ↗
15. Properties of cement–rice husk mixture10.1016/S0950-0618(03)00005-9 ↗
16. Mindess · 2003
17. Malhotra · 1996
18. Rice-husk ash paste and concrete: some aspects of hydration and the microstructure of the interfacial zone between the aggregate and paste10.1016/0008-8846(96)00061-0 ↗
19. Hydration and microstructure of ultra high performance concrete incorporating rice husk ash10.1016/j.cemconres.2011.06.009 ↗
20. Key factor in rice husk ash/CaO sorbent for high flue gas desulfurization activity10.1021/es061136l ↗
21. Astm, C 597-09. Standard test method for pulse velocity through, concrete; 2009.
22. TS EN 12390-3, Testing hardened concrete – Part 3: Compressive strength of test specimens; 2010.
23. TS EN 12086, Thermal insulating products for building applications determination of long term water absorption by immersion; 2002.
24. TS ISO 8302, Thermal insulation; determination of steady-state thermal resistance and related properties; guarded hot plate apparatus; 2002.
25. Determination of the effect of volcanic pumice replacement on macrovoid development for blended cement mortars by computerized tomography10.1016/j.conbuildmat.2012.02.084 ↗
26. Research on fatigue cracking growth parameters in asphaltic mixtures using computed tomography10.1016/S0168-583X(03)01610-0 ↗
27. Quantification of damage parameters using X-ray tomography images10.1016/S0167-6636(02)00206-5 ↗
28. Estimation of air void and aggregate spatial distributions in concrete under uniaxial compression using computer tomography scanning10.1016/j.cemconres.2004.08.016 ↗
29. Caliskan S. Examining concrete cores by non-destructive techniques. In: 4th middle east NDT conference and exhibition. Kingdom of Bahrain; 2007.
30. Mechanical properties of foamed concrete exposed to high temperatures10.1016/j.conbuildmat.2011.06.067 ↗
31. Permeability and pore structure evolution of silicocalcareous and hematite high-strength concretes submitted to high temperatures
32. Akman · 2000
33. Facile catalytic combustion of rice husk and burning temperature dependence of the ashes