Effect of crumb rubber modifiers on high temperature susceptibility of wearing course mixtures
Source abstract
Abstract
Abstract This paper investigates the effects of different sizes of crumb rubber modifier (CRM) on the high temperature susceptibility of three gradations (AC-10, AC-20 and PA) of wearing course mixtures. A wet process and 10% CRM by total weight of binders were used in these studies and the control variables for these studies included three CRMs of sizes 0.15 mm, 0.30 mm and 0.60 mm. The evaluations were twofold. Firstly, a comparison of the properties of those modified and unmodified binders at a wide range of testing temperatures and ageing conditions was conducted. Secondary, a comparison of the rutting resistance of the CRM and conventional mixtures was made. The results show that all the CRMs have overall contributed to better performance of both binders and mixtures at high temperatures. In addition, among these three CRM sizes, mixtures modified with 0.15 mm CRM exhibited the best effect on the dense-graded mixture (AC-10 and AC-20) whereas mixtures modified with 0.60 mm CRM exhibited the best effect on the open-graded mixture of porous asphalt (PA).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Innovative concrete reinforcement materials · Infrastructure Maintenance and Monitoring
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Maupin GW Jr. Hot mix asphalt rubber applications in virginia. P18, Transportation Research Record No.1530.10.1177/0361198196153000103 ↗
2. Hicks RG, Lundy JR, Leahy RB, Hanson D, Epps JA. Crumb rubber modifiers (CRM) in asphalt pavements: summary of practices in Arizona, California and Florida. Report: FHWA-SA-95-056. University of Arizona, September, 1995.
3. Ruth BE. Evaluation of ground tire rubber in asphalt concrete. Final report. Department of Civil Engineering, University of Florida, January, 1992.
4. Viscosity characteristics of rubber-modified asphalts10.1061/(ASCE)0899-1561(1996)8:3(153) ↗
5. Laboratory evaluation of crumb rubber modified asphalt mixes10.1061/(ASCE)0899-1561(2004)16:1(45) ↗
6. Choubano Bouzid, Sholar James Gregory A, Musselman A, Page Galo C. Long term performance evaluation of asphalt-rubber surface mixes. Research report FL/DOT/SMO/98-431, State Of Florida, November, 1998.
7. Chehovits JG, Hicks RG, Lundy J. Mix design procedures. Workshops on crumb rubber modifiers, FHWA and Nevada Transportation Technology Transfer Center, March, 1993.
8. Superior performance asphalt pavements, The product of the SHRP asphalt research program, National Research Council, Washington, DC, 1994.
9. Montgomery · 1997
10. Minitab Inc. MINITAB User’s Guide 2: Data Analysis and Quality Tools, Release 13. USA, 2000. p. 2-20–2-25.
11. Factor controlling the effect of crumb rubber on critical properties of asphalt binder