Effects of pre-soaked super absorbent polymers on fresh and hardened properties of self-consolidating lightweight concrete
Source abstract
Abstract
Abstract In this research, the influence of pre-soaked super absorbent polymers (SAPs) on the properties of Self-Consolidating Lightweight Concrete (SCLWC) was evaluated. SAP with two different fineness of 1–4 mm and 0.3–1 mm was incorporated in SCLWC mixtures at a constant percentage of 1.5%, by mass of binder. SCLWC mixtures were evaluated in terms of slump flow, T50, V-funnel, J-ring, compressive strength, water absorption, electrical resistivity, and total shrinkage. The test results indicated that SAP improve passing ability and decreases the static stability of fresh SCLWC mixtures. Furthermore, the use of SAP reduced the compressive strength of SCLWC mixtures at 7 and 28 days ages and induced a negative effect on the electrical resistivity and water absorption of SCLWC. However, the use of SAP resulted in up to 50% reduction in total shrinkage of SCLWC, compared to the reference mixture made without SAP.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Properties and Behavior · Concrete and Cement Materials Research · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Aïtcin · 1998
2. ACI Committee 237 · 2007
3. Chandra · 2002
4. Prediction of lightweight concrete strength by categorized regression, MLR and ANN10.12989/cac.2013.12.2.151 ↗
5. Design and application of self-compacting lightweight concrete
6. Internal curing of high-performance concrete with pre-soaked fine lightweight aggregate for prevention of autogenous shrinkage cracking10.1016/j.cemconres.2008.02.001 ↗
7. Influence of prewetted lightweight aggregates on the behavior and cracking potential of internally cured concrete at an early age10.1016/j.conbuildmat.2015.08.093 ↗
8. Jones · 2014
9. Influence of aggregate type on workability of self-consolidating lightweight concrete10.1680/macr.2011.63.1.1 ↗
10. A study on the performance of lightweight self-consolidated concrete10.1680/macr.2008.62.1.39 ↗
11. Degree of segregation of self-compacting concrete using viscosity agent
12. Daczko · 2012
13. Self-compacting lightweight concrete produced with expanded clay aggregate10.1016/j.conbuildmat.2012.04.111 ↗
14. Characteristics of self-compacting concrete in fresh state with artificial light-weight aggregate10.2472/jsms.50.1021 ↗
15. Effect of superabsorbent polymers (SAPs) on rheological properties of fresh cement-based mortars—development of yield stress and plastic viscosity over time10.1016/j.cemconres.2014.07.003 ↗
16. Effect of superabsorbent polymers on workability and hydration process in fly ash cementitious composites
17. Application of super absorbent polymers (SAP) in concrete construction
18. Water-entrained cement-based materials: II. Experimental observations10.1016/S0008-8846(02)00737-8 ↗
19. Mechanical properties of concrete with SAP part I: Development of compressive strength
20. Visualization of water penetration in cementitious materials with superabsorbent polymers by means of neutron radiography10.1016/j.cemconres.2012.05.005 ↗
21. Chloride migration in concrete with superabsorbent polymers10.1016/j.cemconcomp.2014.09.023 ↗
22. Mitigating early age shrinkage of concrete by using Super Absorbent Polymers
23. The influence of superabsorbent polymers on strength and durability properties of blended cement mortars10.1016/j.cemconcomp.2014.03.008 ↗
24. Effect of pre-soaked superabsorbent polymer on shrinkage of high-strength concrete
25. Multifunctional use of SAP in strain-hardening cement-based composites
26. Effect of internal curing with super absorbent polymers on the relative humidity of early-age concrete10.1016/j.conbuildmat.2015.08.042 ↗
27. Internal curing by superabsorbent polymers in ultra-high performance concrete10.1016/j.cemconres.2015.05.005 ↗
28. Influence of superabsorbent polymers on hydration of cement pastes with low water-to-binder ratio10.1007/s10973-013-3359-x ↗
29. Effect of internal curing by using superabsorbent polymers (SAP) on autogenous shrinkage and other properties of a high-performance fine-grained concrete: results of a RILEM round-robin test10.1617/s11527-013-0078-5 ↗
30. ASTM · 2006
31. ASTM · 2013
32. Relation between the molecular structure and the efficiency of superabsorbent polymers (SAP) as concrete admixture to mitigate autogenous shrinkage10.1016/j.cemconres.2012.03.011 ↗
33. 2014
34. Efnarc · 2005
35. BSI · 2011
36. Concrete mix proportions with ultra-high electrical resistivity
37. Use of natural zeolite as a supplementary cementitious material10.1016/j.cemconcomp.2009.10.006 ↗
38. Test methods for on site measurement of resistivity of concrete—a RILEM TC-154 technical recommendation10.1016/S0950-0618(00)00061-1 ↗
39. Use of natural zeolite to produce self-consolidating concrete with low Portland cement content and high durability10.1061/(ASCE)MT.1943-5533.0000621 ↗
40. Electrical resistivity measurements for quality control during concrete construction
41. The resistivity of mortars immersed in sea-water10.1016/0008-8846(86)90089-X ↗
42. 2008
43. Research on appropriate content of super absorbent polymer added of marine concrete10.4028/www.scientific.net/AMM.501-504.2116 ↗
44. Mitigation of volume changes of ultra-high performance concrete (UHPC) by using super absorbent polymers
45. Influence of a low-activity slag and silica fume on the fresh properties and durability of high performance self-consolidating concrete
46. Mehta · 2014
47. FM5-578 · 2004
48. Studying effects of low-reactivity GGBFS on chloride resistance of conventional and high strength concretes
49. Effect of hybrid curing on cracking potential of high-performance concrete10.1016/j.cemconres.2013.08.001 ↗