Properties of magnesium phosphate cement containing redispersible polymer powder
Source abstract
Abstract
Abstract Magnesium phosphate cement (MPC) prepared with dead burned magnesia oxide (MgO), potassium dihydrogen phosphate (KH 2 PO 4 , KDP) and some retarders at a given proportion was applied as repairing material. In this research, the mechanical properties and durability of MPC modified by a silane-based redispersible polymer powder (RPP) were investigated. The experimental results demonstrate that the compressive and flexural strength at different curing ages increased as increasing RPP content initial, and decreased as the content going beyond 0.35%. The addition of RPP significantly improved the bonding strength between MPC mortar and substrate OPC concrete, and the flexural and tensile bonding strength of MPC with 0.233% RPP at 1 day of curing were 4.6 MPa and 1.65 MPa, respectively. The addition of RPP can improve the pore structure and transfer the hydrophilic surface of some minerals to hydrophobic one, hence improving the water resistance of MPC. For MPC mortar with RPP after freeze-thaw cycles, the mass loss and the freeze-thaw influence coefficient were both smaller due to less water permeating into hardened MPC mortar. Due to more harmless pores in MPC mortar with RPP, the volume stability was improved. The XRD analysis illustrates that small amount of RPP has little impact on the hydration reaction of MPC. The SEM micrographs confirms that the pore structure of set MPC could be improved by adding an appropriate content of RPP.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Layered Double Hydroxides Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Strength degradation of polymer concrete in acidic environments10.1016/j.cemconcomp.2007.04.001 ↗
2. Effect of cracking and healing on chloride transport in OPC concrete10.1016/0008-8846(96)00072-5 ↗
3. Adhesion characterization of tungsten mine waste geopolymeric binder. Influence of OPC concrete substrate surface treatment10.1016/j.conbuildmat.2006.10.005 ↗
4. Compatibility of repair mortars with concrete in a hot-dry environment10.1016/S0958-9465(00)00073-1 ↗
5. Rapid setting magnesium phosphate cement for quick repair of concrete pavements-characterization and durability aspects10.1016/0008-8846(93)90090-V ↗
6. Influence of magnesia surface on the setting time of magnesia-phosphate cement10.1016/S0008-8846(01)00647-0 ↗
7. Factors that affect the properties of magnesium phosphate cement10.1016/j.conbuildmat.2013.05.103 ↗
8. Properties and applications of magnesia–phosphate cement mortar for rapid repair of concrete10.1016/S0008-8846(00)00419-1 ↗
9. Factors influencing properties of phosphate cement based binder for rapid repair of concrete10.1016/S0008-8846(98)00230-0 ↗
10. Deicer-scaling resistance of phosphate cement-based binder for rapid repair of concrete10.1016/S0008-8846(01)00651-2 ↗
11. Semi-dynamic leaching tests of nickel containing wastes stabilized/solidified with magnesium potassium phosphate cements10.1016/j.jhazmat.2010.12.093 ↗
12. High-early-strength magnesium phosphate cement with fly ash
13. Calorimetric study of magnesium potassium phosphate cement10.1617/s11527-011-9776-z ↗
14. Microstructure of magnesium potassium phosphate cement10.1016/j.conbuildmat.2010.12.035 ↗
15. Effect of disodium hydrogen phosphate on hydration and hardening of magnesium potassium phosphate cement10.1061/(ASCE)MT.1943-5533.0000305 ↗
16. Cementing mechanism of potassium phosphate based magnesium phosphate cement10.1016/j.ceramint.2012.04.083 ↗
17. Dehydration characteristics of struvite-K pertaining to magnesium potassium phosphate cement system in non-isothermal condition10.1007/s10973-011-2170-9 ↗
18. Potentiometric study of the formation of magnesium potassium phosphate hexahydrate10.1061/(ASCE)MT.1943-5533.0000410 ↗
19. Magnesium potassium phosphate cement paste: degree of reaction, porosity and pore structure10.1016/j.cemconres.2014.07.012 ↗
20. Durability of recycled aggregates concrete: a safe way to sustainable development10.1016/j.cemconres.2004.02.009 ↗
21. Hydraulic lime mortars with siloxane for waterproofing historic masonry10.1016/j.cemconres.2006.11.007 ↗
22. Thaumasite formation and deterioration in historic buildings10.1016/S0958-9465(98)00044-4 ↗
23. Effects of water content, magnesia-to-phosphate molar ratio and age on pore structure, strength and permeability of magnesium potassium phosphate cement paste10.1016/j.matdes.2014.07.073 ↗
24. The influence of water-repellent admixtures on the behaviour and the effectiveness of Portland limestone cement mortars10.1016/j.cemconcomp.2015.02.004 ↗
25. The mechanism for soluble phosphates to improve the water resistance of magnesium oxychloride cement10.1016/S0008-8846(03)00043-7 ↗
26. Effect of water glass on water stability of potassium magnesium phosphate cement paste10.1016/j.cemconcomp.2014.03.012 ↗
27. Magnesium phosphate cements formulated with a low-grade MgO by-product: physico-mechanical and durability aspects10.1016/j.conbuildmat.2015.05.071 ↗
28. Property evaluation of magnesium phosphate cement mortar as patch repair material10.1016/j.conbuildmat.2009.10.039 ↗
29. A method for assessing bond performance of cement-based repair materials10.1016/j.conbuildmat.2014.06.048 ↗
30. Resistance to external sodium sulfate attack for early-opening-to-traffic Portland cement concrete10.1016/j.cemconcomp.2007.05.003 ↗
31. Mercury intrusion porosimetry in concrete technology: tips of measurement, pore structure parameter acquisition and application10.1007/s10934-013-9765-4 ↗
32. The effect of hybrid fibers and expansive agent on the shrinkage and permeability of high-performance concrete10.1016/S0008-8846(00)00479-8 ↗