journal article·2019-02

Effect of additives on the structural organization of asphaltene aggregates in bitumen

Pietro Calandra, Paolino Caputo, Maria Penelope De Santo, Lorena Todaro, Vincenzo Turco Liveri, Cesare Oliviero Rossi

Publisher page

Abstract

Bitumens are composite materials whose complex organization hinders the rational understanding of their relationships between composition, structure and performances. So, research attempting to shed more light in this field is required. In this work Wide Angle X ray Scattering (WAXS) has been used to explore the influence of six opportunely chosen additives on the bitumen structure with the aim to ultimately correlate the findings with the bitumen performances. Diagnostic fingerprints have been observed in the WAXS profile: asphaltenes form stuck of about 18 Å and constituted by about 6 asphaltene units on average. Such stucks are, in turn, organized at higher levels of complexity forming anisotropic aggregates of about 200 Å × 28 Å which, again, are assembled to form micrometer-size elongated aggregates characterized by the so-called bee-structure. The structural effects of the six opportunely chosen additives (Organosilane, Polyphosphoric, Phospholipids, Acetamidophenol, Oleic Acid, octadecylamine) have been pointed out and, corroborated by AFM images, have been correlated with the rheological behavior and justified at the microscopic level: additive with an apolar nature are preferentially located in the maltene phase weakening asphaltene inter-clusters interactions and softening the bitumen, whereas, on the contrary more polar additives act in opposite directions. Peculiar behavior have been unveiled in the case of amphiphilic additive due to the simultaneous presence, within their molecular architecture, of both polar and apolar moieties. The knowledge of the detailed effect of appropriately chosen additives on the nanoscopic and mesoscopic structure and their correlation with the rheological properties constitute the first step for opening the door to the piloted design of new bitumens with desired properties for ad-hoc uses.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Petroleum Processing and Analysis · Asphalt Pavement Performance Evaluation · Enhanced Oil Recovery Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Network morphology of straight and polymer modified asphalt cements10.1002/(SICI)1097-0029(19970901)38:5<529::AID-JEMT11>3.0.CO;2-O ↗
2. The colloidal structure of bitumen: consequences on the rheology and on the mechanisms of bitumen modification10.1016/j.cis.2008.08.011 ↗
3. Structural change of bitumen in the recycling process by using rheology and NMR10.1021/ie301899v ↗
4. Rheological and H-NMR spin–spin relaxation time for the evaluation of the effects of PPA addition on bitumen10.1080/15421406.2011.653679 ↗
5. Evaluation of potential processes for use in warm mix asphalt
6. Assessment of the performance of warm mix asphalts in road pavements
7. Rheology of warm mix asphalt binders with aged binders10.1016/j.conbuildmat.2010.06.040 ↗
8. Performance of warm mix asphalt containing Sasobit®: State-of-the-art10.1016/j.conbuildmat.2012.08.015 ↗
9. Altgelt · 1994
10. How self-assembly of amphiphilic molecules can generate complexity in the nanoscale10.1016/j.colsurfa.2015.07.058 ↗
11. Influence of styrene-butadiene-styrene polymer modification on bitumen viscosity10.1016/S0016-2361(97)00144-0 ↗
12. Influence of waxes on bitumen and asphalt concrete mixture performance10.1080/14680629.2009.9690197 ↗
13. Thermomechanical and microstructural evaluation of hybrid rubberised bitumen containing a thermoplastic polymer10.1016/j.conbuildmat.2017.09.126 ↗
14. Mechanical resilience of modified bitumen at different cooling rates: a rheological and atomic force microscopy investigation10.3390/app7080779 ↗
15. Changes of Properties of Bitumen binders by additives application10.1088/1757-899X/245/3/032003 ↗
16. Improvement of thermal-oxidative stability of petroleum bitumen using “overoxidation-dilution” technology and introduction of antioxidant additives10.1080/10916466.2017.1367803 ↗
17. Identification of Microstructural components of bitumen by means of Atomic Force microscopy (AFM)10.1002/pamm.200410181 ↗
18. The bitumen microstructure: a fluorescent approach10.1617/s11527-014-0484-3 ↗
19. Influence of poly(phosphoric acid) on the properties and structure of ethylene-vinyl acetate-modified bitumen10.1002/app.46553 ↗
20. Structure and performance evaluation on aged SBS modified bitumen with bi- or tri- epoxy reactive rejuvenating system10.1016/j.conbuildmat.2017.06.102 ↗
21. Characterization of asphaltene aggregates using X-ray diffraction and small-angle X-ray scattering10.1021/ef034082z ↗
22. Effect of rejuvenator containing dodecyl benzene sulfonic acid (DBSA) on physical properties, chemical components, colloidal structure and micro-morphology of aged bitumen10.3390/ma11081476 ↗
23. Quantitative evaluation of organosilane-based adhesion promoter effect on bitumen-aggregate bond by contact angle test10.1016/j.ijadhadh.2016.10.015 ↗
24. Rheological effects on bitumen of polyphosphoric acid (PPA) addition10.1016/j.conbuildmat.2012.11.001 ↗
25. Role of a food grade additive in the high temperature performance of modified bitumens
26. Read · 2003
27. Effects of WMA additive on the rheological properties of asphalt binder and high temperature performance grade
28. Effect of mixing variables on physical properties of modified bitumen using natural rubber latex
29. Separation and characterization of bitumen from Athabasca oil sand10.1007/s11814-009-0011-3 ↗
30. Study of Rheological Properties of bituminous binders in middle and high temperatures10.1515/cee-2016-0002 ↗
31. Barnes · 1989
32. Gels of Pluronic F127 and nonionic surfactants from rheological characterization to controlled drug permeation10.1016/j.colsurfb.2011.04.033 ↗
33. Colloidal properties of asphaltenes in organic solvents
34. The diffraction of electrons by anthracene10.1088/0959-5309/51/3/312 ↗
35. Anti-Arrhenian behaviour of conductivity in octanoic acid–bis(2-ethylhexyl)amine systems: a physico-chemical study10.1039/C4TC02500H ↗
36. Self-assembly in surfactant-based mixtures driven by acid–base reactions: bis(2-ethylhexyl) phosphoric acid– n-octylamine systems10.1039/c3ra23295f ↗
37. Self-assembly in surfactant-based liquid mixtures: Octanoic acid/Bis(2-ethylhexyl)amine systems10.1016/j.jcis.2011.10.015 ↗
38. Self-assembly in surfactant-based liquid mixtures: Bis(2-ethylhexyl)phosphoric acid/bis(2-ethylhexyl)amine systems10.1016/j.jcis.2010.04.031 ↗
39. Amphotropic ionic liquid crystals with low order parameters10.1021/cm034963j ↗
40. Glatter · 1982
41. Schmidt · 1989
42. Macrostructures of the asphaltic fractions by various instrumental methods10.1021/ac50157a057 ↗
43. Aggregates structure analysis of petroleum asphaltenes with small-angle neutron scattering10.1021/ef020019i ↗
44. Rubber-modified bitumens
45. Macosko · 1994
46. Rheological effects of commercial waxes and polyphosphoric acid in bitumen 160/220 – high and medium temperature performance10.1016/j.conbuildmat.2006.07.012 ↗
47. Rheological effects of commercial waxes and polyphosphoric acid in bitumen 160/220—low temperature performance10.1016/j.fuel.2005.09.014 ↗
48. Low temperature rheology of polyphosphoric acid (PPA) added bitumen10.1016/j.conbuildmat.2012.06.011 ↗